hi darkrickpr, just ask a U1 user to create a from dump using the RomDump tool. This will create a dump and you'll find the parameters file in the system.tar archive.
here's a detailed tut: http://vondroid.com/viewtopic.php?f=46&t=322
all the best!

 

Thank you for helping i have got the pipo U1 firmware from Nuclea_ and extract the parameter file i now the clockwork mod is working on my the Pipo U1 and now android boot up and nand backup works.
NOW LETS COOKROM for this tablet.i need help to learn how to zip ROM and make it flashables on cwm any guide will help
by the way if you need to Root this tablet or the Pipo Max M11 use the ZhuoDaShi-2.2.9-setup.exe

 

will this also work on Pipo Max M1?

Thanks

Jon

 

Hi!

Could you kindly also share the original Pipo U1 firmware?
Would you also have the firmware flashing tools and instructions?

Thanks!

 

Hi!

Could you kindly also share the original Pipo U1 firmware?
Would you also have the firmware flashing tools and instructions?

Yes Here it is the Stock firmware for is the Pipo U1
Part 1: http://www.mediafire.com/?6dkm5x8rsx78zxm
Part 2: http://www.mediafire.com/?bf46jio3oi8kgcy
Part 3: http://www.mediafire.com/?y9wz8gl4kk7nb9n

 

Pipo U1 CWM Recovery (it has already in the package the parameter file from the pipo u1 no need to extract it your self)

Thanks to
Christian Troy for CWM for RK3066
Nuclea_ for giving e the Pipo U1 Firmware
anyone else i forgot THANK YOU

Now lets start cooking Roms for this Tablet

Use at your on risk!!! But it work on mine it should work 4 you.!!! Remember to do a nand backup on CWM.
http://www.mediafire...rdcn397hum6mia0

You should recompile the recovery as well from Christian's sources, so that the key layout for your tablet is fully supported.

XUTT

 

the keys are working perfectly without need to modified and the backup nand works

 

Hey Logseman, do you know how to compile recoveries from source? If yes, could you do that for the Aoson M11?

 

I can see how to do it (I compiled CM and lots of programs that way), but at the moment I don't have a computer very able to compile anything (a certain oomph is needed to compile stuff, and all I have at the moment is a netbook).

If I remember correctly Christian presents his sources in a git tree, so you should clone Christian's tree, modify the values for the keys according to the key test which you can perform in CWM itself or via keytest.apk, merge those changes and try if you've done it properly. If it works, you could ask him to let you contribute that change to a branch.

You'll need to run Linux for that (I use Ubuntu), and you should install git and the build-essential tools if they're not included in the distribution you choose.

XUTT

 

You need the rk batch tool to flash the stock firmware. The cwm recovery is a tool that exchange the original recovery with this custom recovery giving you more flexibilitie to fix your tablet without the use of a pc or even install custom roms made for this tab.

Sent from my HTC PH39100 using Tapatalk 2

 

Thanks. So none of these 2 SW will root my Pipo U1?

 

to root it download ZhuoDaShi-2.2.10-setup.exe it is in Chinese

 

@Logseman: I'm unable to be able to run Ubuntu natively on my laptop (overlapping partitions reported by gparted-can you help?) And have it installed on VirtualMachine. I'd assume 512mb RAM in a virtual machine would be far to less, going by what you said?

Sent from my LG Optimus One using Tapatalk 2

 

512 MB will barely run Ubuntu, let alone compile anything. You should dual boot unless you have a monster. You just need to make room for an ext4 and another swap partition with gparted in the live CD, and then run a custom install on that partition.

XUTT

 

Hi, how to use this? just a newbie question...thanks

 

Got it here..
http://dragondevs.com/viewtopic.php?f=167&t=414

 

Hi, Where you can download the manual in English for Pipo U1?

 

how do you did this? any steps?

after rooting do i need to unlock bootloader using zuodashi first before i install cwm? pardon my ignorance im just new with android rooting.

 

how do you did this? any steps?

after rooting do i need to unlock bootloader using zuodashi first before i install can? pardon my ignorance im just new with android rooting.

no need to root for instal lt just extract the archive power off you pipo u1 and press and hold the volume + button and plug the usb cable to the pc without releasing the button and windows should aski you for rk30 device driver you can findl it inside my archive and open the tool and flash it it will.reboot to cwm do a nand backup. remember the table doesnt have yet a custom rom to be use on the cwm so just recovy will work to nand backup or.to format user data cache.

 

@darkrickpr

Thank you very much. Once i extracted the cwm recovery you posted, do i need to check any options in the tool or i just need to press the flash button?

what are the things might happen while doing this? is this irreversable in case something happened? like it doesnt boot up at all?

do reason i need to do this is i need to change the boot logo of pipo u1 and in any case something happened i can easily restore it back using cwm recovery.

 

not you dont have to check any other option just flash.you can always return back to original but with the cwm you need to do a nand backup first thing thats will then restore your pipo u1 if somthing get bad.

 

Yess if somwethine goes wrong and the tablet doesnt load the os you can alway restore it via rk batchtool and with the official firmware you can find.it in the other post pipo u1

Sent from my HTC PH39100 using Tapatalk 2

 

can we install the new firmware using the cwm?

 

guys just installed cwm, now my big problem is i want to update the stock rom using the new fw update on pipos website. how would i update now?

 

Normal method dude.. but you'll lost cwm after the update. So flash cwm again after updating.

Sent from my LG Optimus One using Tapatalk 2

 

how? the normal method for the tab is to go to recovery mode to update fw... if i did that the cwm appear... is there any way to update pipo u1?

 

sir darkrickpr any chance of cwm for pipo u1 pro user?? thanks

 

Sorry for late replay I think it can be possible to run the same u1 cwm on u1pro

Sent from my HTC Holiday using Tapatalk 2

 

hopefully this CWM works with Pipo U1 Pro.. if somebody already try this CWM on Pipo U1 Pro please provide feedback,.. thanks,..

 

someone already try to use the CWM of pipo u1 to pipo u1 pro but it end up bootloop,.. thanks..
Sent from my Speedstar S using Tapatalk 2

 

I will make a package if you.want to give a test on your pipo u1pro to get cwm

Sent from my HTC Holiday using Tapatalk 2

 

thanks darkrickpr... I'll wait for that package.. I'll test it..

Sent from my SAMSUNG-Galaxy Nexus using Tapatalk 2

 

here is the package this will only flash the cwm also i have included boot.img kernel.img but arent checked so you can check them also on the rkandroid to and flash it as well i just forgot to doit http://www.mediafire.com/?cmbpmwexwx1f603

 

Pipo U1

Not working for me.
After flashing, the tablet pc start back in flash mode.

 

That should be that you have the u1pro and not the u1

Sent from my HTC Holiday using Tapatalk 2

 

On my Pipo u1 pro when power on always appear recovery menu

Enviado desde mi SGH-I777 usando Tapatalk 2