[ntah'ngoh1]

About a month ago, I bought a ZT-180 based tablet. A few days ago, it started booting and then shut down. Since then the screen is blank whenever it is turned on even though it seems to boot since I hear the familiar boot sound. When I remove the FT flash memory, it does not just boot at all. I have reflashed it to no avail. Any help?Thanks.Ntah'ngoh

 

[fishfood]

Hello!I bought a Zenithink ePAD 10"2..... I turned it on, everything works fine, after about 10 minutes, the screen turns black...I made a reset on the device... now it starts, I see the startscreen, after that, the TUX on the left upper side, and 2 seconds later the screen turns black again.Don't know why, so I want to flash the device again with a custom rom, but while flashing the system.img the screen gets black (background light turns off) and flashing gets stuck at about 69% :|So the PAD doesn't work again ;(best regardsFisH

 

[mingnon]

Have a look at this thread ZT-180theres plenty of information in it, and if you post a question in there it will get answered pretty, also the "search" function works great now

 

[Brinkley1988]

I think maybe you could reset first, to see whether it could back to normal. if it still doesn't work, you could still reflash the whole rom.