Android Tablets Forum banner
1 - 14 of 14 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #1 ·
I look forward for those users who use a tablet with a WM8850 CPU.

Found this on http://www.leadinglight.com.cn/pages/info/WONDERMEDIA/WONDERMEDIA.html:
WONDERMEDIA PRIZM WM8850 (2012)
KEY FEATURES:
1GHZ ARM CORTEX-A9 CORE PROCESSOR
ARM MALI-400 3D GRAPHICS PROCESSOR
MULTI-STANDARD 1080P VIDEO DECODING ENGINE
H.264 VIDEO ENCODING
DDR3/LPDDR2 DRAM INTERFACE
MULTIPLE VIDEO INTERFACE INCLUDING HDMI, LVDS AND DVO
FLEXIBLE NETWORKING AND PERIPHERAL INTERFACE
ADVANCED HARDWARE SECURITY ENGINE
ANDROID 4.0 AND WINDOWS CE 7.0 SUPPORT
If you have a device powered by this SoC, please share your experience with us!

Video from YouTube: Pandawill review about a tablet with WM8850 CPU

 

·
Registered
Joined
·
2 Posts
I would like to make a backup of the Flash memory to be able to restore it in case I brick my device, since the firmware does not appear to be available for this device.
I've installed ROM manager, but since it does not recognize the device (wm8850-mid), it won't be able to perform the backup. Any risk-free way to do such backup ?
 

·
Registered
Joined
·
1 Posts
Hi i was brick my 8850 ekenw70 flashing this

WM8850_MID7_PuZhi_W01_8223_FT5206_W70_WMC1579

i was buy it here:

http://www.aliexpres...holesalers.html

can sugest something to debrick??

All what i have is one black screen, i try to reflash but no luck.
Hello

Those tablets wont brick, that's for sure. I have one Go on Touch PC677 (WonderMedia, WM8850 processor, branded as WM8550-MID in system information).
After several incorrect firmware's I managed to put him to work with "7 Touch firmware WMC-1592.zip", but at a cost, I lost 4Gb internal HDD (original 8Gb).
Some of the tries I made also lead me to a black screen, this is because the firmware is not the correct one when you get the right one he will live again.

Best regards
JO
 

·
Registered
Joined
·
79 Posts
Hello

Those tablets wont brick, that's for sure. I have one Go on Touch PC677 (WonderMedia, WM8850 processor, branded as WM8550-MID in system information).
After several incorrect firmware's I managed to put him to work with "7 Touch firmware WMC-1592.zip", but at a cost, I lost 4Gb internal HDD (original 8Gb).
Some of the tries I made also lead me to a black screen, this is because the firmware is not the correct one when you get the right one he will live again.

Best regards
JO
Mine is back to china, i was try several diferent firmwares.

Go see there:

http://www.techknow.t0xic.nl/forum/index.php?topic=3189.0

or here:

http://www.techknow.t0xic.nl/forum/index.php?topic=3069.0
 

·
Registered
Joined
·
3 Posts
I all i see that in this forum you are talking about wondermedia 8850 tablet, i had an eken w70 clone( i'm sure of it because i was able to install on it the eken w70 1.5.5 firmware without problem) when it worked it work very fine good 3d speed, nice browsing capability, but after trying to install jellybean from veedee E10 that has appeared good to me even on config file i see configuration for eken w70, the update goes good it donw all steps but after the sdcard remove advice, my tablet wont turn on anymore, someone had this problem? some way to fix ?, (the battery charge led working fine, the battery charged correctly, set to default button do nothing) tnx further, any help appreciated
bye
 

·
Registered
Joined
·
252 Posts
Hi androx1974,
I have a similar tablet, wm8850 with dual camera. I successfully flashed the Uberoid JellyBean 0.7 firmware (available here) on that device this morning. You could try that on your device, with the appropiate w70 .fcw file. There are a number of different w70 models and clones, so you might have to try different config files.

Other than that, you wrote that you could flash the w70 FW from the eken homepage, I'd suggest going back to that firmware first, in order to see if the device is still flashable (=reflash 1.5.5).
If the reflash with 1.5.5 FW works well, you can take the .fwc-file from the 1.5.5 FW for the JellyBean flash (I did the same thing after messing up my backside cam with a wrong .fwc file).

Good luck,
best regards, PADMAN
 

·
Registered
Joined
·
3 Posts
,tnx for the info, i had tried to reflash the tablet, but nothing to do the tablet where dead, i have sent it back to assistance, after some weak they have changed it, i had luck, tnx for your help anyway.
 

·
Registered
Joined
·
1 Posts
Hello, I'm trying to help you, much like the android system, but wanted to test the Windows CE on 7 inch netbook with WM8850, I wonder if any of you has the rom for Windows CE Netbook, I am very grateful everyone can help me.
 

·
Registered
Joined
·
20 Posts
yes i own a netbook pc i got 3weeks ago just got in the post today has a wm8850 Cotex A9 1.2GHz CPU and 512mb ram 7" screen 4gb hdd and also hdmi port

have tested 1080p with a bitrate of 10000kbps and it runs fine also played gta 3 on it runs perfect and it only cost 65.88usd that is whit shipping i spent a whole week looking online for the cheapest one and this one was

anybody need a link to buy one just ask
 

·
Registered
Joined
·
5 Posts
i have a tablet and it look just like an ipad the first generation and i need the model no. and name so i can get the stock firmware for it -this is all i know about it now android 2.2 .x froyo, kernel 2.6.32, build number v1.5.5 and its MID the size is 9'7 and its unbranded/generic,has a front web/camera i don't know if its a wm 8850 or 8650 but i tried all the wm8650 firmware help
 

·
Registered
Joined
·
5 Posts
i forgot to tell u but i have a black screen and my charging color is red and my power color is blue i did have the android man with info in the right hand corner and then i found software but now nothing but i can charge
 
1 - 14 of 14 Posts
Top