Android Tablets Forum banner
1 - 2 of 31 Posts

· Registered
4 Posts
Gus, could you try to give me some help or a hint with a usb cam?I have a Bus 001 Device 003: ID 093a:2468 Pixart Imaging, Inc. SoC PC-CameraThis uses gspca modules. I while ago you built all modules against a vanilla kernel source tree.I've successfully inserted the gspca modules, webcam gets on /dev/video0:gspca: main v2.4.0 registeredgspca: probing 093a:2468pac207: Pixart Sensor ID 0x27 Chips ID 0x00pac207: Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x093A:0x2468)gspca: probe okusbcore: registered new interface driver pac207pac207: registeredBut when i try to do anything with the camera, I get a:gspca: usb_submit_urb [0] err -28I've tracked this to this lauchpad bug: suggests to use a new version of the gspca code.Could you be so kind to build this module against the new kernel source? Or maybe just the rebuild against the new kernel will do...btw, my webcam best results is this:I've tried with another camera, but with similar results, so maybe there's some kernel incompatibility?Thanks,
1 - 2 of 31 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.