Android Tablets Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
30 Posts
Maybe there is a hope, see here http://www.slatedroid.com/topic/46881-picuntu-09-rc-22-bug-fix-version-arrives/ : "Entry in /etc/network/intefaces not correct for eth0 - when using assitant - also bcm40181, not in /etc/modules". BCM40181 (RK903) is what we need.

I will check that today evening.

Also interesing here http://www.armtvtech.com/armtvtechforum/viewtopic.php?f=66&t=212&start=370#p6316 bcm40181.ko, fw_bcmdhd.bin and bcmdhd.cal.


Ohhh! SORRY! For MK808B we need RK903=BCM40183, not BCM40181 (RK901), sorry, my fault!
 

· Registered
Joined
·
4 Posts
Thanks for the Info.
But my Problem is, that no USB-Hub is working (1 without an 1 with external Power (Hama with 1.2A)).
When I put a mouse direkt to my mk808b it works. With USB Hub not. Same with my 2 Remotes (Small Keyboards with mousetouchpad).
So i think i'll have the same Probs with an external Wlan Stick.
 

· Registered
Joined
·
21 Posts
Thanks for the Info.
But my Problem is, that no USB-Hub is working (1 without an 1 with external Power (Hama with 1.2A)).
When I put a mouse direkt to my mk808b it works. With USB Hub not. Same with my 2 Remotes (Small Keyboards with mousetouchpad).
So i think i'll have the same Probs with an external Wlan Stick.
Evil,
Most USB hubs work, I have tried 4 or 5 different ones. So far, I have 1 hub that is not being recognized.
Until linux source is released for the Broadcom wifi and Mediatec Bluetooth chips on the MK808B, they will remain unsupported.
Several other devices have a Mediatec wifi and bluetooth chip on them and are in the same boat at this time.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top