Android Tablets Forum banner
1 - 13 of 13 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Hi, I just bought a 7" generic Apad I-Robot with camera, red led and 9V adapter, plastic case. I want to upgrade to an english firmware 1.5 or 1.6 but don?t know how to find a version which will not brick my tablet. The information I found is:

Model number: rk2808sdk

Firmware version: 1.0.1

Kernel version: 2.6.25

rockchip version 1.27(LaoTang)

Compilation number: LaoTang.eng.temp.20100909.172719



Can anybody help here? Thank you!
 

·
Registered
Joined
·
0 Posts
Hi Guys,

I just joined the forum today. Not allowed to post a new thread yet.
I have similar problem with Clintzodiac, need to get the right ROM.
I did flash the wrong ROM to my tablet and sadly I don't have a back up.

So, can anybody show me where to download the right rom to my device ?

My device is :

7-inch Resistive touchscreen tablet with 800 x 480 pixel resolution
Processor : Rockchip RK2818sdk 600MHz
RAM : 256MB
Storage 4GB

Please note that the display is resistive.

I try to flash the Gingerbread ROM I found in this forum but unfortunately I didn't notice that it is for capatitive tablet.
The ROM was flashed succesfully, I get the homescreen but there is nothing I can do since the screen is not responding.
 

·
Registered
Joined
·
39 Posts
Hi Guys,

I just joined the forum today. Not allowed to post a new thread yet.
I have similar problem with Clintzodiac, need to get the right ROM.
I did flash the wrong ROM to my tablet and sadly I don't have a back up.

So, can anybody show me where to download the right rom to my device ?

My device is :

7-inch Resistive touchscreen tablet with 800 x 480 pixel resolution
Processor : Rockchip RK2818sdk 600MHz
RAM : 256MB
Storage 4GB

Please note that the display is resistive.

I try to flash the Gingerbread ROM I found in this forum but unfortunately I didn't notice that it is for capatitive tablet.
The ROM was flashed succesfully, I get the homescreen but there is nothing I can do since the screen is not responding.
If you haven't already done so, you may want to try the N6 rooted Froyo (Android 2.21) ROM created by Li0nHeart, and discussed in this thread: --> http://www.slatedroid.com/topic/18804-rooted-n6-and-n9-roms-english/

That ROM is specifically designed for a resistive 7" 800x480, and works perfectly on my iRobot tablet. Good luck!
 

·
Registered
Joined
·
0 Posts
hi guys, i joined today,got a acho c901 pro tablet for my wife,can anybody help me to 'unlock' this tablet. i stay in south africa,when i connect a 3g modem,it doesn't pick up the network. i am also unable to connect it to my pc,the pc just give me a error msg (code43). can anybody help me pls
 

·
Registered
Joined
·
1 Posts
I have a tablet exact like this, but it is a orange tb001 CPD: 600 MHZ RAM: 256 MB FLASH: 4 GB, i belive that is a rockchip 2808 or 2818.

Need some help, i flash the image .img found on the manufacture website, and now he just stay with te logo of android on the up left corner.

i sucessfully flash he with another files .img, but the leters stay with a risk on the midle and some functions like wireless dosn't work.

Since of now, thanks.

Sorry for the bad english, but i'm brasilian and talk just a little bit.
 

·
Registered
Joined
·
2 Posts
Hi All, I've got an Archos 7" Home Tablet v1 with 8gig storage internal with a microsd card slot that will accept upto 16gig cards running Android 1.5 and would like to upgrade it to at least Android 2.0 or above. any ideas?
 

·
Registered
Joined
·
2 Posts
If you haven't already done so, you may want to try the N6 rooted Froyo (Android 2.21) ROM created by Li0nHeart, and discussed in this thread: --> http://www.slatedroid.com/topic/18804-rooted-n6-and-n9-roms-english/

That ROM is specifically designed for a resistive 7" 800x480, and works perfectly on my iRobot tablet. Good luck!
Thanx for the lead.
Might get me out of trouble. There was no market or gmail when device came. Installed and didn't boot again.

Oh well.
Chris
 

·
Registered
Joined
·
4 Posts
my third noob post. anybody ever heard of an Elsse 7in tablet with only red chargeing led, rockchip rk2808, spreadwin firmware version. It wont make backup file using adb backup command, says every .img file is invalid, and a host of other things...
 

·
Registered
Joined
·
0 Posts
Greetings,have an Elsse(chinese) tablet that have used for about 2 months,after New Years I left it charging for a while,and when I came back it started acting real strange,it took double the time to boot android and the touch screen did no respond properly,a computer was able to read and edit sd card,It recognized a mouse -with more than 600 dpi to be recognized and I was able to do a factory reset...
...after this it only boots android to the touchscreen calibration,but with finger or with mouse it does not finish loading ,by clicking the right nouse button I get the acreen with the media sound and time(keeps time from last factory reset),but says calibration in process,it shuts down only when I use my finger and the mouse together,I tried to set uberoid on and sd card,but did not boot it,it runs on safe mode,but this seems to make no difference.Should I try to root it,with android sdk??,should I tried to disconnect the battery and unbricking it by shorting it ...Any ideas would be of help!!!!
 
1 - 13 of 13 Posts
Top