Android Tablets Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
57 Posts
Discussion Starter · #1 ·
I thought I'd relate what I did to unbrick my R7T40WWHF1 white novel.

I picked it up for cheap in hopes of getting it to work. From the looks of it, the previous owner tried to change the firmware and bricked it. No display whatsoever - no blue screen, no Andy. When I connected the charger, the power LED came on. When I turned the power on, the LED went off.

I was able connect to it and saw some interesting files. There was a 55,455,435 byte file called S64N_SLST_KOBO_PD_20110602.dat. Also there was a 103,902,945 byte SLD20_20110610_B_PD_INX7E_ENG_6410POP.zip file, and an empty directory called SLD20_20110610_B_PD_INX7E_ENG_6410POP. There was a 488,110 byte recovery.img file too.

I deleted the .dat and .zip files and the empty directory.

I tried Joseph Pruitt's recommendation from his Oct 12 post at:
http://www.slatedroid.com/topic/37852-walmart-wpdn-r7t40wwhf1-firmware/page__st__40
He suggested loading the Android Open Kit from Pandigital. (I see the link has been removed - probably a good thing). So I flashed it, and it gave me hope, as the display now came on when I powered on the unit, but stuck at the blue startup screen. It looks like it really messed up the partitions. I don't suggest doing this!

I then flashed the clockwork version from mac1_131 MAC1_CWM_RECOVERY_C1SL20_20120224_B_PD_INX7E_ENG_6410POP.zip from:
http://www.slatedroid.com/topic/37852-walmart-wpdn-r7t40wwhf1-firmware/page__st__

After playing around a while I got the screen that says:
CWM-based Recovery v5.5.0.4
E:Can't find misc
E:Can't find misc
E:Error in /cache/recovery/log
(No space left on device)
E:Error in /cache/recovery/last_log
(No space left on device)
E:Can't find misc

If your screen is black, take a look the panengineer part of MickeeDee's post at:
http://www.slatedroid.com/topic/34281-do-not-downgrade-wpdn-from-sl20-20120224-to-s10-or-sh20-fw/page__st__100
for what buttons to press and when to tap the screen. It seems like I had to do this at one time to get something flashed successfully.

At this point I discovered my adb didn't work properly. With "adb devices" I kept seeing:
List of devices attached
???????????? no permissions

I finally tried it with my working older Novel and saw the same. After trying 2 other laptops, I finally got one that it worked with. I followed Giant Wookie's advice and pushed the 4 files from his link:
http://www.mediafire.com/?6ad6a1wr9lum0zi
by doing:
adb push bootloader.img /data/misc
adb push kernel.img /data/misc
adb push id.img /data/misc
adb push ramdisk.img /data/misc
adb shell
flash_image bootloader /data/misc/bootloader.img
flash_image kernel /data/misc/kernel.img
flash_image id /data/misc/id.img
flash_image ramdisk /data/misc/ramdisk.img
reboot

Voila, my unit now worked. Other users report not having /data and instead have /system. Some didn't have /system/misc, so simply replacing references to "/data/misc" with "/system" got them up and running again.

A few other notes:
I only used the internal SD card. I found on this model, the battery plug comes out quite easily (not so on the older model). So to reset the unit, I would unplug the battery, then reconnect it and do the power/vol+ combination for flashing.

I wanted to get this all in one place. Hopefully that's useful to someone.
 

·
Premium Member
Joined
·
1,566 Posts
I haven't been keeping up to date on the 2012 firmware issue is it simply an incompatibility with the bootloader and kernel?
 

·
Premium Member
Joined
·
7,365 Posts
I haven't been keeping up to date on the 2012 firmware issue is it simply an incompatibility with the bootloader and kernel?
Not certain because there are a couple different FW's. Trouble is no one has a full copy of the 2012 stock fw posted anywhere that I know of.

Seems to me that the newbs problems with the "Wal-Mart" 2012 FW and S20 FW could simply just be that people are downgrading to that S20 "Kit" FW without the fixflash ... and from the fw files he had on his pdn, it looks like the previous owner tried downgrading with RRA's Walmart pdn.
 

·
Registered
Joined
·
57 Posts
Not certain because there are a couple different FW's. Trouble is no one has a full copy of the 2012 stock fw posted anywhere that I know of.

Seems to me that the newbs problems with the "Wal-Mart" 2012 FW and S20 FW could simply just be that people are downgrading to that S20 "Kit" FW without the fixflash ... and from the fw files he had on his pdn, it looks like the previous owner tried downgrading with RRA's Walmart pdn.
Some misc thoughts:

I suspect folks flashing the S20 kit may think they're somehow upgrading and need it so they can flash the gapps SW and other additions. I'm hearing some mixed signals as to if the gapps fix works properly or requires some framework mod afterwards.

I also wonder if there's a difference in how the partitioning is done. I should look at my older Novel and compare the two. There seems to be some issue as to the naming of them. There's references to either /data or /system. Of course the Walmart beast has 4GB, but I wouldn't think size matters as it's supposed to be split in half...
 

·
Premium Member
Joined
·
784 Posts
The partitioning of the internal sdcard shouldn't be important and is a S20 or newer thing.

The layout of the Onenand is critical. During a boot the kernel defines these. Doing an Adb dmesg shortly after booting will show these kernel messages.

Post these from the walmart novel if you can.
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #6 ·
The partitioning of the internal sdcard shouldn't be important and is a S20 or newer thing.

The layout of the Onenand is critical. During a boot the kernel defines these. Doing an Adb dmesg shortly after booting will show these kernel messages.

Post these from the walmart novel if you can.
I still haven't got around to doing this myself (gotta kick the kids off the ereader), but an earlier post from Giant Wookie shows:

So I was able to get my hands on another factory-flashed R7T40WWHF1 and I ran dmesg and see:

6>[ 1.909484] OneNAND: generic_onenand_probe - (Virt) Base Address: 0xD1A00000
<6>[ 1.914092] onenand_probe: Use four bases (128K, 16M, 16M, 256K)
<7>[ 1.920544] OneNAND Manufacturer: Samsung (0xec)
<6>[ 1.920570] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
<6>[ 1.924747] OneNAND version = 0x0121
<7>[ 1.928360] Chip support all block unlock
<6>[ 1.996915] Scanning device for bad blocks
<5>[ 2.958300] Creating 8 MTD partitions on "onenand":
<5>[ 2.958350] 0x000000000000-0x000000200000 : "bootloader"
<5>[ 2.966309] 0x000000200000-0x000000a00000 : "kernel"
<5>[ 2.970844] 0x000000a00000-0x000000b00000 : "id"
<5>[ 2.975378] 0x000000b00000-0x000001500000 : "recovery"
<5>[ 2.980496] 0x000001500000-0x000001800000 : "ramdisk"
<5>[ 2.985462] 0x000001800000-0x000009500000 : "system"
<5>[ 2.991022] 0x000009500000-0x00000e000000 : "cache"
<5>[ 2.995654] 0x00000e000000-0x000010000000 : "userdata"
<5>[ 3.001036] usbmon: debugfs is not available
<6>[ 3.001675] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<4>[ 3.008036] usb_hcd_s3c2410_probe:init host clk

This is from:
http://www.slatedroid.com/topic/37852-walmart-wpdn-r7t40wwhf1-firmware/page__st__60
 

·
Premium Member
Joined
·
784 Posts
SH20 kernel

2.088025] OneNAND: generic_onenand_probe - (Virt) Base Address: 0xD0C00000

[ 2.092834] onenand_probe: Use four bases (128K, 16M, 16M, 256K)

[ 2.099286] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)

[ 2.103951] OneNAND version = 0x0121

[ 2.245627] Scanning device for bad blocks

[ 4.171304] Creating 8 MTD partitions on "onenand":

[ 4.171354] 0x000000000000-0x000000200000 : "bootloader"

[ 4.179463] 0x000000200000-0x000000a00000 : "kernel"

[ 4.183789] 0x000000a00000-0x000000b00000 : "id"

[ 4.188351] 0x000000b00000-0x000001500000 : "recovery"

[ 4.193455] 0x000001500000-0x000001800000 : "ramdisk"

[ 4.198593] 0x000001800000-0x00000e000000 : "system"

[ 4.204164] 0x00000e000000-0x000014400000 : "cache"

[ 4.208777] 0x000014400000-0x000020000000 : "userdata"

Looks a little different, explains why our flash screws these machines, kernel onenand partitioning isn't compatible. Looks more like a cruz.

Flashing without a kernel may work.

Do we have a full kernel dmesg?
 

·
Premium Member
Joined
·
784 Posts
My bad.

The standard SH20 kernel.
 

·
Registered
Joined
·
57 Posts
Discussion Starter · #11 ·
SH20 kernel

2.088025] OneNAND: generic_onenand_probe - (Virt) Base Address: 0xD0C00000

[ 2.092834] onenand_probe: Use four bases (128K, 16M, 16M, 256K)

[ 2.099286] Muxed OneNAND(DDP) 512MB 1.8V 16-bit (0x58)

[ 2.103951] OneNAND version = 0x0121

[ 2.245627] Scanning device for bad blocks

[ 4.171304] Creating 8 MTD partitions on "onenand":

[ 4.171354] 0x000000000000-0x000000200000 : "bootloader"

[ 4.179463] 0x000000200000-0x000000a00000 : "kernel"

[ 4.183789] 0x000000a00000-0x000000b00000 : "id"

[ 4.188351] 0x000000b00000-0x000001500000 : "recovery"

[ 4.193455] 0x000001500000-0x000001800000 : "ramdisk"

[ 4.198593] 0x000001800000-0x00000e000000 : "system"

[ 4.204164] 0x00000e000000-0x000014400000 : "cache"

[ 4.208777] 0x000014400000-0x000020000000 : "userdata"

Looks a little different, explains why our flash screws these machines, kernel onenand partitioning isn't compatible. Looks more like a cruz.

Flashing without a kernel may work.

Do we have a full kernel dmesg?
Here's what I get from a dmesg on a freshly booted Walmart kernel (note this is the unit I unbricked).

<5>[ 0.000000] Linux version 2.6.29 ([email protected]) (gcc version 4.2.2) #0 BSP_3_01_005_20120323 Fri Mar 23 19:21:11 CST 2012
<4>[ 0.000000] CPU: ARMv6-compatible processor [410fb766] revision 6 (ARMv7), cr=00c5307f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[ 0.000000] Machine: SMDK6410
<4>[ 0.000000] Ignoring unrecognised tag 0x00000000
<4>[ 0.000000] Ignoring unrecognised tag 0x41001099
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 52224
<7>[ 0.000000] free_area_init_node: node 0, pgdat c05d3104, node_mem_map c0699000
<7>[ 0.000000] DMA zone: 408 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 51816 pages, LIFO batch:15
<4>[ 0.000000] CPU S3C6410 (id 0x36410101)
<7>[ 0.000000] s3c6410_init_clocks: initialising clocks
<6>[ 0.000000] S3C Clocks, (c) 2004 Simtec Electronics
<7>[ 0.000000] s3c64xx_setup_clocks: registering clocks
<7>[ 0.000000] s3c64xx_setup_clocks: clkdiv0 = 01053510
<7>[ 0.000000] s3c64xx_setup_clocks: xtal is 12000000
<6>[ 0.000000] S3C64XX: PLL settings, A=800000000, M=532000000, E=24000000
<6>[ 0.000000] S3C64XX: HCLKx2=266666666, HCLK=133333333, PCLK=66666666
<6>[ 0.000000] mout_apll: source is fout_apll (1), rate is 800000000
<6>[ 0.000000] mout_epll: source is fout_epll (1), rate is 24000000
<6>[ 0.000000] mout_mpll: source is mpll (1), rate is 532000000
<6>[ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000
<6>[ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000
<6>[ 0.000000] mmc_bus: source is dout_mpll (1), rate is 266000000
<6>[ 0.000000] usb-host-bus: source is mout_epll (0), rate is 24000000
<6>[ 0.000000] lcd: source is dout_mpll (1), rate is 266000000
<6>[ 0.000000] uclk1: source is dout_mpll (1), rate is 66500000
<6>[ 0.000000] spi_epll: source is mout_epll (0), rate is 24000000
<6>[ 0.000000] spi_epll: source is mout_epll (0), rate is 24000000
<6>[ 0.000000] sclk_audio0: source is mout_epll (0), rate is 24000000
<6>[ 0.000000] sclk_audio1: source is mout_epll (0), rate is 24000000
<6>[ 0.000000] sclk_audio2: source is mout_epll (0), rate is 24000000
<6>[ 0.000000] irda-bus: source is mout_epll (0), rate is 24000000
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 51816
<5>[ 0.000000] Kernel command line: console=ttySAC1,115200 root=/dev/ram0 rw ramdisk=1024 init=/init
<7>[ 0.000000] s3c64xx_init_irq: initialising interrupts
<4>[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
<4>[ 0.000327] Console: colour dummy device 80x30
<6>[ 0.000463] console [ttySAC1] enabled
<6>[ 0.180779] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.189717] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.212870] Memory: 204MB = 204MB total
<5>[ 0.212924] Memory: 199808KB available (3732K code, 2825K data, 152K init)
<6>[ 0.218708] Calibrating delay loop... 199.47 BogoMIPS (lpj=498688)
<4>[ 0.315440] Mount-cache hash table entries: 512
<6>[ 0.317374] CPU: Testing write buffer coherency: ok
<6>[ 0.324477] net_namespace: 520 bytes
<6>[ 0.326923] regulator: core version 0.5
<6>[ 0.329515] NET: Registered protocol family 16
<4>[ 0.337645] max17044 exist
<4>[ 0.337682] *** This board type is LC1 ***
<6>[ 0.341716] s3c-i2c s3c-i2c.0: slave address 0x10
<6>[ 0.344582] s3c-i2c s3c-i2c.0: bus frequency set to 378 KHz
<6>[ 0.351954] s3c-i2c s3c-i2c.0: i2c-0: S3C I2C adapter
<6>[ 0.355868] s3c-i2c s3c-i2c.1: slave address 0x10
<6>[ 0.359839] s3c-i2c s3c-i2c.1: bus frequency set to 378 KHz
<1>[ 0.366636] colorbook6410_max8698_init<6>s3c-i2c s3c-i2c.1: i2c-1: S3C I2C adapter
<4>[ 0.388277] S3C6410 Power Management, (c) 2008 Samsung Electronics
<4>[ 0.388999] S3C6410: Initialising architecture
<4>[ 0.393358] S3C DMA-pl080 Controller Driver, (c) 2006-2007 Samsung Electronics
<4>[ 0.400604] Total 32 DMA channels will be initialized.
<6>[ 0.409012] i2c /dev entries driver
<4>[ 0.457328] bio: create slab <bio-0> at 0
<6>[ 0.458982] regulator: LDO1: 3300 mV fast normal
<6>[ 0.461698] regulator: LDO2: 1200 mV fast normal
<6>[ 0.466267] regulator: LDO3: 1200 mV fast normal
<6>[ 0.471130] regulator: LDO4: 3300 mV fast normal
<6>[ 0.475569] regulator: LDO5: 3300 mV fast normal
<6>[ 0.480241] regulator: LDO6: 3300 mV fast normal
<6>[ 0.484850] regulator: LDO7: 3300 mV fast normal
<6>[ 0.489688] regulator: LDO8: 3300 mV fast normal
<6>[ 0.494267] regulator: LDO9: 3300 mV fast normal
<6>[ 0.500695] usbcore: registered new interface driver usbfs
<6>[ 0.504284] usbcore: registered new interface driver hub
<6>[ 0.509347] usbcore: registered new device driver usb
<7>[ 0.520078] Switched to high resolution mode on CPU 0
<6>[ 0.526315] sdhci: Samsung S3C6410 SD/MMC driver
<6>[ 0.526525] s3c-sdhci s3c-sdhci.1: clock source 0: hsmmc (133333333 Hz)
<6>[ 0.532031] s3c-sdhci s3c-sdhci.1: clock source 1: hsmmc (133333333 Hz)
<6>[ 0.538551] s3c-sdhci s3c-sdhci.1: clock source 2: hsmmc (133333333 Hz)
<6>[ 0.545885] Registered led device: mmc0
<6>[ 0.549433] mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using DMA
<6>[ 0.556038] s3c-sdhci s3c-sdhci.0: clock source 0: hsmmc (133333333 Hz)
<6>[ 0.562624] s3c-sdhci s3c-sdhci.0: clock source 1: hsmmc (133333333 Hz)
<6>[ 0.569123] s3c-sdhci s3c-sdhci.0: clock source 2: hsmmc (133333333 Hz)
<6>[ 0.576386] Registered led device: mmc1
<6>[ 0.579949] mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using DMA
<6>[ 0.587213] NET: Registered protocol family 2
<6>[ 0.591124] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.598384] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.605489] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.611406] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.617329] TCP reno registered
<6>[ 0.620837] NET: Registered protocol family 1
<6>[ 0.625605] checking if image is initramfs... it is
<6>[ 0.703128] Freeing initrd memory: 156K
<4>[ 0.704072] S3C PWM Driver, (c) 2006-2007 Samsung Electronics
<4>[ 0.707567] NetWinder Floating Point Emulator V0.97 (double precision)
<6>[ 0.727624] ashmem: initialized
<4>[ 0.733265] yaffs Mar 23 2012 19:22:04 Installing.
<6>[ 0.733385] msgmni has been set to 391
<6>[ 0.741804] alg: No test for stdrng (krng)
<6>[ 0.741992] io scheduler noop registered
<6>[ 0.744229] io scheduler anticipatory registered (default)
<6>[ 0.749803] io scheduler deadline registered
<6>[ 0.754179] io scheduler cfq registered
<4>[ 0.759175] S3C_LCD clock got enabled :: 266.000 Mhz
<6>[ 0.767829] mmc0: new high speed SDHC card at address 0002
<6>[ 0.769125] mmcblk0: mmc0:0002 00000 3.70 GiB
<6>[ 0.772973] mmcblk0:<6>LCD TYPE :: CLAA070MA0ACW will be initialized
<4>[ 0.779111] *************init_gpio**************
<4>[ 0.919243] Window[0] - FB1: map_video_memory: clear ff000000:003a9800
<4>[ 0.920209] FB1: map_video_memory: dma=5c800000 cpu=ff000000 size=003a9800
<4>[ 0.928082] Window[0] - FB2: map_video_memory: clear ff1d4c00:001d4c00
<4>[ 0.934577] FB2: map_video_memory: dma=5c9d4c00 cpu=ff1d4c00 size=001d4c00
<4>[ 0.969522] Console: switching to colour frame buffer device 100x37
<6>[ 0.994870] fb0: s3cfb frame buffer device
<4>[ 1.014315] Window[1] - FB1: map_video_memory: clear ff3aa000:003a9800
<4>[ 1.015279] FB1: map_video_memory: dma=5bc00000 cpu=ff3aa000 size=003a9800
<4>[ 1.023149] Window[1] - FB2: map_video_memory: clear ff57ec00:001d4c00
<4>[ 1.029642] FB2: map_video_memory: dma=5bdd4c00 cpu=ff57ec00 size=001d4c00
<4>[ 1.037954] p1 p2
<6>[ 1.042614] fb1: s3cfb frame buffer device
<4>[ 1.043603] show logo
<6>[ 1.073987] LCD power on sequence start
<6>[ 1.074033] LCD power on sequence end
<4>[ 1.077470] SMDK board LCD Backlight Device Driver (c) 2008 Samsung Electronics
<6>[ 1.083989] Registered led device: lcd-backlight
<6>[ 1.228203] mmc1: new high speed SDHC card at address 1234
<6>[ 1.231287] mmcblk1: mmc1:1234 SA08G 7.28 GiB
<6>[ 1.232821] mmcblk1: p1
<6>[ 1.665369] lp: driver loaded but no devices found
<6>[ 1.665420] S3C64XX ADC driver, (c) 2007 Samsung Electronics
<6>[ 1.670493] ADC platform data read
<6>[ 1.673556] ADC presc is 49
<6>[ 1.676392] ADC delay is 255
<6>[ 1.679187] ADC resolution is 12
<6>[ 1.683431] S3C64XX ADC driver successfully probed !
<6>[ 1.688871] ppdev: user-space parallel port driver
<6>[ 1.692525] s3c64xx-uart.0: s3c_serial0 at MMIO 0x7f005000 (irq = 16) is a S3C64XX
<6>[ 1.701277] s3c64xx-uart.1: s3c_serial1 at MMIO 0x7f005400 (irq = 20) is a S3C64XX
<6>[ 1.708770] s3c64xx-uart.2: s3c_serial2 at MMIO 0x7f005800 (irq = 24) is a S3C64XX
<6>[ 1.716528] s3c64xx-uart.3: s3c_serial3 at MMIO 0x7f005c00 (irq = 28) is a S3C64XX
<6>[ 1.745642] brd: module loaded
<6>[ 1.756535] loop: module loaded
<6>[ 1.756715] pmem: 1 init
<6>[ 1.758155] pmem_render: 0 init
<6>[ 1.761007] pmem_preview: 0 init
<6>[ 1.764100] pmem_picture: 0 init
<6>[ 1.767362] pmem_jpeg: 0 init
<6>[ 1.770678] Linux video capture interface: v2.00
<4>[ 1.775982] S3C G2D Init : Done
<6>[ 1.776938] S3C G3D Driver, (c) 2007-2009 Samsung Electronics
<4>[ 1.784106] s3c_g3d version : 0x1050000
<4>[ 1.786582] G3D_RESERVED_MEM_SIZE : 32 MB
<4>[ 1.790516] G3D_CHUNK_SIZE : 2 MB
<4>[ 1.793752] G3D_CHUNK_NUM : 16 (UI_CHUNK:5)
<4>[ 1.797956] 0 th virt_addr = 0xce000000, phy_addr = 0x5e000000
<4>[ 1.803755] 1 th virt_addr = 0xce200000, phy_addr = 0x5e200000
<4>[ 1.809565] 2 th virt_addr = 0xce400000, phy_addr = 0x5e400000
<4>[ 1.815381] 3 th virt_addr = 0xce600000, phy_addr = 0x5e600000
<4>[ 1.821181] 4 th virt_addr = 0xce800000, phy_addr = 0x5e800000
<4>[ 1.826991] 5 th virt_addr = 0xcea00000, phy_addr = 0x5ea00000
<4>[ 1.832797] 6 th virt_addr = 0xcec00000, phy_addr = 0x5ec00000
<4>[ 1.838604] 7 th virt_addr = 0xcee00000, phy_addr = 0x5ee00000
<4>[ 1.844416] 8 th virt_addr = 0xcf000000, phy_addr = 0x5f000000
<4>[ 1.850229] 9 th virt_addr = 0xcf200000, phy_addr = 0x5f200000
<4>[ 1.856033] 10 th virt_addr = 0xcf400000, phy_addr = 0x5f400000
<4>[ 1.861928] 11 th virt_addr = 0xcf600000, phy_addr = 0x5f600000
<4>[ 1.867826] 12 th virt_addr = 0xcf800000, phy_addr = 0x5f800000
<4>[ 1.873718] 13 th virt_addr = 0xcfa00000, phy_addr = 0x5fa00000
<4>[ 1.879613] 14 th virt_addr = 0xcfc00000, phy_addr = 0x5fc00000
<4>[ 1.885512] 15 th virt_addr = 0xcfe00000, phy_addr = 0x5fe00000
<6>[ 1.891859] S3C6400 MFC Driver, (c) 2007 Samsung Electronics
<4>[ 1.901946] S3C6400 MFC driver module init OK.
<6>[ 1.901997] S3C PostProcessor Driver v3.12, (c) 2009 Samsung Electronics
<6>[ 1.909867] S3C JPEG Driver, (c) 2007 Samsung Electronics
<6>[ 1.916578] S3C CMM Driver, (c) 2008 Samsung Electronics
<6>[ 1.921265] OneNAND: generic_onenand_probe - (Virt) Base Address: 0xD1A00000
<6>[ 1.925906] onenand_probe: Use four bases (128K, 16M, 16M, 256K)
<7>[ 1.932291] OneNAND Manufacturer: Samsung (0xec)
<6>[ 1.932318] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
<6>[ 1.936587] OneNAND version = 0x0121
<7>[ 1.940147] Chip support all block unlock
<6>[ 2.010214] Scanning device for bad blocks
<5>[ 2.974571] Creating 8 MTD partitions on "onenand":
<5>[ 2.974624] 0x000000000000-0x000000200000 : "bootloader"
<5>[ 2.982615] 0x000000200000-0x000000a00000 : "kernel"
<5>[ 2.987114] 0x000000a00000-0x000000b00000 : "id"
<5>[ 2.991614] 0x000000b00000-0x000001500000 : "recovery"
<5>[ 2.996812] 0x000001500000-0x000001800000 : "ramdisk"
<5>[ 3.001884] 0x000001800000-0x000009500000 : "system"
<5>[ 3.007299] 0x000009500000-0x00000e000000 : "cache"
<5>[ 3.011902] 0x00000e000000-0x000010000000 : "userdata"
<5>[ 3.017270] usbmon: debugfs is not available
<6>[ 3.017950] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<4>[ 3.024314] usb_hcd_s3c2410_probe:init host clk
<6>[ 3.028998] s3c2410-ohci s3c2410-ohci: S3C24XX OHCI
<6>[ 3.034140] s3c2410-ohci s3c2410-ohci: new USB bus registered, assigned bus number 1
<6>[ 3.041343] s3c2410-ohci s3c2410-ohci: irq 79, io mem 0x74300000
<6>[ 3.105614] usb usb1: configuration #1 chosen from 1 choice
<6>[ 3.106460] hub 1-0:1.0: USB hub found
<6>[ 3.109411] hub 1-0:1.0: 2 ports detected
<4>[ 3.117711] [S3C USB-OTG MODE] : DMA
<4>[ 3.119950] [ADB_UMS_ACM] string_dev = PD_Novel
<6>[ 3.121533] mass_storage_function_add
<6>[ 3.127179] android_usb gadget: 1.Number of LUNs=2
<6>[ 3.129857] adb_function_add
<6>[ 3.133869] android_usb gadget: Android Composite USB, version: Mar 23 2012
<6>[ 3.139747] android_usb gadget: android_usb ready
<4>[ 3.144383] Registered gadget driver 'android_usb'
<4>[ 3.150325] reconnect usb
<6>[ 3.152721] mice: PS/2 mouse device common for all mice
<6>[ 3.158303] input: gpio-keys as /class/input/input0
<6>[ 3.163495] S3C Touchscreen driver, (c) 2009 Samsung Electronics
<4>[ 3.183207] TS ID item found
<4>[ 3.198307] TS ID item found
<4>[ 3.228500] TS ID value is valid
<6>[ 3.228756] S3C TouchScreen got loaded successfully : 12 bits
<6>[ 3.233340] input: S3C TouchScreen as /class/input/input1
<6>[ 3.242142] input: angle-switch as /class/input/input2
<4>[ 3.244342] S3C RTC, (c) 2004,2006 Simtec Electronics
<4>[ 3.247553] s3c_rtc: tick irq 34, alarm irq 92
<6>[ 3.251884] s3c-rtc s3c-rtc: rtc disabled, re-enabling
<6>[ 3.259762] s3c-rtc s3c-rtc: rtc core: registered s3c as rtc0
<6>[ 3.263755] s3c_bat_init
<6>[ 3.265418] smdk6410-battery smdk6410-battery: s3c_bat_probe
<4>[ 3.403314] writing unlock Register,and ret is 1
<4>[ 3.403621] data[0] is 93 and data[1] is 15,and data[2] is ca, and data[3] is d1,
<4>[ 3.410108] rt_value[0] is 93 and rt_value[1] is 15,and rt_value[2] is ca, and rt_value[3] is d1,
<4>[ 3.419063] writing OCV Register,and ret is 1
<4>[ 3.423401] writing rccomp Register,and ret is 1
<4>[ 3.428432] data0 writing mode,and ret is 1
<4>[ 3.432546] data1 writing mode,and ret is 1
<4>[ 3.436701] data2 writing mode,and ret is 1
<4>[ 3.440866] data3 writing mode,and ret is 1
<4>[ 3.645226] writing OCV Register,and ret is 1
<4>[ 3.845614] restore data[0] is 93
<4>[ 3.845647] restore data[1] is 15
<4>[ 3.846588] restore data[2] is ca
<4>[ 3.849881] restore data[3] is d1
<4>[ 3.853215] *****get into write code restore and data[1] is 93
<4>[ 3.859039] *****get into write code restore and data[2] is 0
<4>[ 3.864747] *****get into write code restore and data[3] is ca
<4>[ 3.870558] *****get into write code restore and data[4] is d1
<4>[ 3.876928] writing rccomp Register,and ret is 1
<4>[ 3.881369] Johnson:writing quick start!<6>max17044-battery 0-0036: support ver. 0.0.0 enabled
<6>[ 4.186909] cpuidle: using governor ladder
<6>[ 4.189479] cpuidle: using governor menu
<6>[ 4.198168] usbcore: registered new interface driver usbhid
<6>[ 4.198932] usbhid: v2.6:USB HID core driver
<6>[ 4.205465] logger: created 64K log 'log_main'
<6>[ 4.208560] logger: created 256K log 'log_events'
<6>[ 4.213399] logger: created 64K log 'log_radio'
<6>[ 4.218533] Advanced Linux Sound Architecture Driver Version 1.0.18a.
<4>[ 4.228783] No device for DAI SSM2602
<4>[ 4.228837] No device for DAI s3c-i2s
<6>[ 4.231377] ssm2602 Audio Codec 0.1<6>asoc: SSM2602 <-> s3c-i2s mapping ok
<3>[ 4.238347] dapm: SSM2602: configuring unknown pin Headphone Jack
<3>[ 4.243496] dapm: SSM2602: configuring unknown pin Mic1 Jack
<3>[ 4.249069] dapm: SSM2602: configuring unknown pin Line In Jack
<6>[ 4.263298] ALSA device list:
<6>[ 4.263339] #0: SMDK6410 (SSM2602)
<6>[ 4.264466] TCP cubic registered
<6>[ 4.267572] NET: Registered protocol family 17
<6>[ 4.271938] NET: Registered protocol family 15
<6>[ 4.276978] RPC: Registered udp transport module.
<6>[ 4.281014] RPC: Registered tcp transport module.
<4>[ 4.287599] share region kernel: reserved 4096 bytes at 0xCD0A0000
<4>[ 4.292019] share region: computed residue = 0xdebb20e3, checksum = 0x82a98639
<4>[ 4.299050] share region: passed
<6>[ 4.302277] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
<4>[ 4.368088] this time bat_staus is 2
<6>[ 7.315129] s3c-rtc s3c-rtc: setting system clock to 2013-01-31 23:02:35 UTC (1359673355)
<6>[ 7.317809] Freeing init memory: 152K
<6>[ 8.503105] yaffs: dev is 32505861 name is "mtdblock5"
<6>[ 8.503150] yaffs: passed flags ""
<4>[ 8.506099] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[ 8.743356] yaffs: restored from checkpoint
<4>[ 8.743715] yaffs_read_super: isCheckpointed 1
<6>[ 8.747487] yaffs: dev is 32505863 name is "mtdblock7"
<6>[ 8.751531] yaffs: passed flags ""
<4>[ 8.754841] yaffs: Attempting MTD mount on 31.7, "mtdblock7"
<4>[ 8.777985] yaffs: restored from checkpoint
<4>[ 8.778360] yaffs_read_super: isCheckpointed 1
<6>[ 8.790418] yaffs: dev is 32505862 name is "mtdblock6"
<6>[ 8.790461] yaffs: passed flags ""
<4>[ 8.793313] yaffs: Attempting MTD mount on 31.6, "mtdblock6"
<4>[ 8.802335] yaffs: restored from checkpoint
<4>[ 8.803171] yaffs_read_super: isCheckpointed 1
<3>[ 9.008209] init: cannot find '/system/bin/playmp3', disabling 'bootsound'
<3>[ 9.062571] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[ 9.066476] init: cannot find '/system/bin/loadWiFi.sh', disabling 'loadWiFi'
<6>[ 9.576734] warning: `rild' uses 32-bit capabilities (legacy support in use)
<4>[ 12.173713] get spk,value=0
<4>[ 12.181241] get spk,value=0
<4>[ 12.261286] this is s3c_i2s_startup
<4>[ 12.275523] IRQ 74/I2S PCM Stereo out: IRQF_DISABLED is not guaranteed on shared IRQs
<4>[ 12.277880] get spk,value=0
<4>[ 12.285099] set spk,value=1
<4>[ 12.298907] unmute codec(gpf2=1)
<4>[ 12.298949] unmute amplifier(gpm1=0)
<6>[ 31.394243] LCD power off sequence start
<6>[ 31.394292] LCD power off sequence end
<4>[ 31.396449] this is state_store<6>request_suspend_state: wakeup (3->0) at 31209234927 (2013-01-31 23:02:59.584146711 UTC)
<6>[ 31.407453] LCD power on sequence start
<6>[ 31.411116] LCD power on sequence end
<4>[ 33.260154] RTC_SYNC: save delta sec:-1 nsec:945052481
<4>[ 41.599337] [handle_suspend_intr]: USB Bus Suspend (DSTS):0x3
<4>[ 41.731105] reconnect usb
<4>[ 42.169754] [s3c_udc_cable_connect]
<6>[ 42.169811] android_usb gadget: high speed config #1: UMS + ADB (Debugging mode)
<4>[ 42.361768] mute codec(gpf2=0)
<4>[ 42.361809] mute amplifier(gpm1=1)
<4>[ 42.368317] this is s3c_i2s_startup
<4>[ 42.384554] IRQ 74/I2S PCM Stereo out: IRQF_DISABLED is not guaranteed on shared IRQs
<4>[ 42.387047] get spk,value=1
<4>[ 42.390370] set spk,value=1
<4>[ 42.392812] unmute codec(gpf2=1)
<4>[ 42.395636] unmute amplifier(gpm1=0)
 

·
Premium Member
Joined
·
784 Posts
thanks looks fimilar but I'll compare tonight
 
1 - 12 of 12 Posts
Top