Android Tablets Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
can anybody provide me the u-boot.bin to flash the wince image?thanks!
 

·
Registered
Joined
·
2 Posts
jtbnet;35302]You can grab it from Joingtang/JT said:
Wince&Android Fiwmare collected in one pack : ZT-180 A105 - Page 2[/url]
Hey' date=' does anyone have a link to the wince os that doesn't require me to register at [url']www.jiong[/url] tang.com or the last post that just times out, the website wont send me a confirmation email when i try to register...Edit: I eventually got the second link to work, and theres not even a place to download wince, only the garbage 804 android rom
 

·
Registered
Joined
·
439 Posts
Mariov-I`ve successfully flashed WinCE on my ZT-180 several times.Which u-boot are you using? The one that is included in the zip file of your post or an android u-boot?I could never get it to work with an android u-boot, it always stuck at android.I like the touch screen response of WinCE but I couldn`t get the internet connection to work. I think it`s my router but I didn`t really troubleshoot it any further after 0818 came out.DamienEdited. I had wifi working fine last night and internet browsing seems faster than on Android. I guess I will have to compare load times for a couple sites.
 

·
Registered
Joined
·
72 Posts
I'm interested in switching OS between Android 2.1 and WinCe. My android tablet doesn't allow me to change it to WinCe. Just wanted to check it out and see how it runs. I think a different uboot is required.Has anyone successfully swapped os yet?
 

·
Registered
Joined
·
439 Posts
JamesDroid;43374 said:
I'm interested in switching OS between Android 2.1 and WinCe. My android tablet doesn't allow me to change it to WinCe. Just wanted to check it out and see how it runs. I think a different uboot is required.Has anyone successfully swapped os yet?
I've successfully flashed my ZT-180 to run WinCE 3-4 times to test it out and compare it to 0804-0818As I mentioned above, I couldn't get it to work with the android u-boot the way all the tuts I found said to do, it always hung with "android" on the screen.Using the u-boot that is included in the zipped file Mariov posted should work just fine. It's WinCE-firmware-0714_1.46_EN/boot tool/imap_init.s.cpu936_ddr234_256M_4layer_low_b0_usb.imgIn Boot Tool, browse to that file for u-boot, then browse to the jiongtang.com-zNK.img for WinCE, save, and start.It looks to be the same bundle I have used to flash WinCE on my device.Damien
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top