Android Tablets Forum banner
141 - 146 of 146 Posts

·
Registered
Joined
·
45 Posts
I'v got same problem it's becouse touch driver in recovery ft5x06.ko from aniol
Code:
"<br />
<4>[ 11.545460] !!!!!!!!!!!!!!!!!!!!! macro is 35<br />
<4>[ 11.549974] *** is 35<br />
<4>[ 11.552265] get irq 0 ok<br />
<4>[ 11.554796] get i2cNum 1 ok<br />
<4>[ 11.557621] get i2cAddr 56 ok<br />
<4>[ 11.560596] get xMax 800 ok<br />
<4>[ 11.563388] get yMax 1280 ok<br />
<4>[ 11.566303] get rotate 2 ok<br />
<4>[ 11.569083] ft5x06_hw_init 1080<br />
<4>[ 11.624855] regulator_init 1511<br />
<4>[ 11.777913] ft5x06 probe v2.0 i file,FT5X0X_DOWNLOAD_FIRM=(1)<br />
<4>[ 11.783686] download !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!<br />
<4>[ 11.789931] [FTS]uc_tp_fm_ver=a6 uc_host_fm_ver=e<br />
<4>[ 11.894881] [FTS] uc_tp_fm_ver = 0xa6, uc_host_fm_ver = 0xe<br />
<4>[ 11.966114] [FTS] Step 1: Reset CTPM test<br />
<4>[ 12.043951] config use upgrad id2=0x3<br />
<4>[ 12.047616] [FTS] Step 3: CTPM ID,ID1 = 0x79,ID2 = 0x3<br />
<4>[ 12.052909] [FTS] bootloader version = 0x18<br />
<4>[ 12.255117]<br />
<4>[ 12.255121] get_cap_gauge, 448, store cap: 100, temp: 100000<br />
<4>[ 14.181987] [FTS] Step 4: erase.<br />
<4>[ 14.185303] [FTS] Step 5: start upgrade.<br />
<4>[ 14.205695] [FTS] upgrade the 0x0 th byte.<br />
<4>[ 14.471991] [FTS] upgrade the 0x400 th byte.<br />
<4>[ 14.738459] [FTS] upgrade the 0x800 th byte.<br />
<4>[ 15.004929] [FTS] upgrade the 0xc00 th byte.<br />
<4>[ 15.271404] [FTS] upgrade the 0x1000 th byte.<br />
<4>[ 15.537960] [FTS] upgrade the 0x1400 th byte.<br />
<4>[ 15.804500] [FTS] upgrade the 0x1800 th byte.<br />
<4>[ 16.080024] [FTS] upgrade the 0x1c00 th byte.<br />
<4>[ 16.363977] [FTS] upgrade the 0x2000 th byte.<br />
<4>[ 16.648169] [FTS] upgrade the 0x2400 th byte.<br />
<4>[ 16.918684] [FTS] upgrade the 0x2800 th byte.<br />
<4>[ 17.185153] [FTS] upgrade the 0x2c00 th byte.<br />
<4>[ 17.451604] [FTS] upgrade the 0x3000 th byte.<br />
<4>[ 17.718063] [FTS] upgrade the 0x3400 th byte.<br />
<4>[ 17.984518] [FTS] upgrade the 0x3800 th byte.<br />
<4>[ 18.250994] [FTS] upgrade the 0x3c00 th byte.<br />
<4>[ 18.517455] [FTS] upgrade the 0x4000 th byte.<br />
<4>[ 18.783917] [FTS] upgrade the 0x4400 th byte.<br />
<4>[ 19.050373] [FTS] upgrade the 0x4800 th byte.<br />
<4>[ 19.316827] [FTS] upgrade the 0x4c00 th byte.<br />
<4>[ 19.583276] [FTS] upgrade the 0x5000 th byte.<br />
<4>[ 19.849722] [FTS] upgrade the 0x5400 th byte.<br />
<4>[ 20.116178] [FTS] upgrade the 0x5800 th byte.<br />
<4>[ 20.255480]<br />
<4>[ 20.255484] [FTS] upgrade the 0x5c00 th byte.<br />
<4>[ 20.647893] [FTS] upgrade the 0x6000 th byte.<br />
<4>[ 21.054195] [FTS] Step 6: ecc read 0xcf, new firmware 0xcf.<br />
<4>[ 21.364862] [FTS] Step over[FTS] upgrade successfully.<br />
<4>[ 21.369983] [FTS] start auto CLB.<br />
<4>[ 22.106352] [FTS] calibration OK.<br />
<4>[ 23.254875] [FTS] store CLB result OK.<br />
<4>[ 23.258610] [FTS] start auto CLB.<br />
<4>[ 23.995455] [FTS] calibration OK.<br />
<4>[ 25.144875] [FTS] store CLB result OK.<br />
<4>[ 25.454988] [FTS] upgrade to new version 0xe
"
and anyone know how to fix it?
Hi. You must use vitro firmware
I used vitro firmware so i fixed that problem ^^
 

·
Registered
Joined
·
6 Posts
I will upload it somewhere.
Hi HellG could you upload your rooted Vitro P70 firmware when you have time to my SkyDrive ([email protected], password teclastp78) I'm using the original firmware and I like it but the tablet dies every time the battery runs out and I need to flash it again. Also anyone is welcome to use my SkyDrive it has 7Gb storage.
 

·
Registered
Joined
·
6 Posts
I have been using the firmware from yandex for a few weeks now and in my opinion is the best we had for the P78 so far no problems at all full access to google play didn't had to root it or do any changes. Thanks to filkint for finding the firmware.
 
141 - 146 of 146 Posts
Top