please can someone help me? I installed flashback and it was running fine everything working then i rebooted the pad and its stuck on the hannspad logo.
I have not got any idea what to do I see nvflash mentioned and a link to the files but all the links are dead.
I am desperate need of a helping hand. I dont suppose any of you guys live near me i am in sutton in ashfield in the UK.
Please get back to me I am really fed up and worried my tablet is an expensive paper weight now.
I am pretty sure that it is just kernel related because i forgot to flash rotations 32 kernel. I know I am a Muppet but please help me rescue my baby.
You can try my NVflash backup http://minus.com/meEEvnEdF
Once NVflashed go into recovery and do a data factory wipe.
NVflash Quick Guide
Pad off
Pad press Volume and Power at the same time until you have a black screen again.
Connect Pad to PC
If your PC like to install a driver, choose it yourself and go to the APX folder in the Backup folder and press ok.
When driver is installed execute the hann guide. bat in the folder and let it do the work.
When finished switch of your pad. Than go to Revory with Vol+ and Power.
Than do a data factory wipe and then reboot.
If this doesnt work try my unbrickfile http://minus.com/mG2tnRnhO
There is a Howto in English and German included.
You can try my NVflash backup http://minus.com/meEEvnEdF
Once NVflashed go into recovery and do a data factory wipe.
NVflash Quick Guide
Pad off
Pad press Volume and Power at the same time until you have a black screen again.
Connect Pad to PC
If your PC like to install a driver, choose it yourself and go to the APX folder in the Backup folder and press ok.
When driver is installed execute the hann guide. bat in the folder and let it do the work.
When finished switch of your pad. Than go to Revory with Vol+ and Power.
Than do a data factory wipe and then reboot.
If this doesnt work try my unbrickfile http://minus.com/mG2tnRnhO
There is a Howto in English and German included.
I am having a similar problem. I have followed many guides to solve this, however, when it comes to actually using the .inf file to have my computer register my Tablet, my computer seems to not allow me to actually utilize the file & while in APX mode it remains unable to register the tablet, how should I make the Computer read the file?
I am running Windows 7 Ultimate on a 32-bit system trying to use the driver titled "NVidiaUSB.inf"
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
-
-
?
-
-
?
-
-
?
-
-
?
-
-
?
Android Tablets Forum
A forum community dedicated to Android Tablet owners and enthusiasts. Come join the discussion about collections, troubleshooting, displays, models, styles, reviews, software, hardware accessories, classifieds, and more!
