[ZeroTolerance]

Hey, Pas. Thank you for making custom ROM for these cheap chinese tablets.

I have a question. Got ZTPad C92 with 1Ghz CPU with /mnt/flash/version.txt file consists this string:

ZT282_H4_1a_1GB_C92+_Android4.0_0523_V1.2

But in your rom I can find only ZT282_H3 in c92 folder. Is it safe to install it over my current, probably official ROM (which is very laggy, and I definitely want to change it, but it's also would be nice not to get device bricked after this

 

[omarahum]

Hey, Pas. Thank you for making custom ROM for these cheap chinese tablets.
I have a question. Got ZTPad C92 with 1Ghz CPU with /mnt/flash/version.txt file consists this string:

ZT282_H4_1a_1GB_C92+_Android4.0_0523_V1.2But in your rom I can find only ZT282_H3 in c92 folder. Is it safe to install it over my current, probably official ROM (which is very laggy, and I definitely want to change it, but it's also would be nice not to get device bricked after this

Screenshot_2014-03-08-15-12-46.png.png

Screenshot_2014-03-08-15-14-37.png.png

Screenshot_2014-03-08-15-13-12.png.png

Do you mean the H3 in the version.txt file? I think that was just a typo....

It does look like it is the correct files in the c92 folder for the H4_1a (spl and sd taken from the 0818 ROM, and my 2gb mod from the 0818 kernel and recovery http://www.zenithink.com/UploadFile/temp/ZT282_H4_1a_1GB_C92+_Android4.0_0818_V1.32.zip .)

 

[ZeroTolerance]

Do you mean the H3 in the version.txt file? I think that was just a typo....

It does look like it is the correct files in the c92 folder for the H4_1a (spl and sd taken from the 0818 ROM, and my 2gb mod from the 0818 kernel and recovery http://www.zenithink.com/UploadFile/temp/ZT282_H4_1a_1GB_C92+_Android4.0_0818_V1.32.zip .)

Oh. I read the entrie thread and now I see. Just flashed ZeniBasic 1.3 and everything seems ok! Build number in settings shows 4.0.3 ZeniBasic v1.2 28/02/13 (not 1.3 for some reason), Antutu result is same as in old stock fw (and even worse) and I can't say it's smooth and extremely fast in any situation, BUT it's still much better, seems like no more annoying freezes/hangs. Thank you omarahum for your contribution to this work!

And you guys are absolute legends for how you give help to punters you dont even know..

This!

 

[omarahum]

Oh. I read the entrie thread and now I see. Just flashed ZeniBasic 1.3 and everything seems ok! Build number in settings shows 4.0.3 ZeniBasic v1.2 28/02/13 (not 1.3 for some reason), Antutu result is same as in old stock fw (and even worse) and I can't say it's smooth and extremely fast in any situation, BUT it's still much better, seems like no more annoying freezes/hangs. Thank you omarahum for your contribution to this work!

This!

I wonder if some build.prop tweaks would make your tablet feel a little bit smoother or not?

Spoiler

Wonder if you replace your build.prop contents with the following, would your tablet perform smoother?:
# begin build properties ZT282 C94
# autogenerated by buildinfo.sh
ro.build.id=ICS.f04ref.20120204
ro.build.display.id=4.0.3 ZeniBasic v1.3 12/12/13
ro.build.version.incremental=eng.root.20120204.165424
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=4.0.3
ro.build.date=Sat Mar 3 09:12:17 CST 2012
ro.build.date.utc=1330737137
ro.build.type=eng
ro.build.user=root
ro.build.host=android
ro.build.tags=test-keys
ro.product.model=Z282 C94
ro.product.brand=samsung
ro.product.name=GT-I9100
ro.product.device=GT-I9100
ro.product.board=GT-I9100
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=14
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=f04ref
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=GT-I9100-eng 4.0.3 IML74K 20120303 test-keys eng.root.20120204.165424 test-keys
ro.build.fingerprint=samsung/GT-I9100/GT-I9100:4.0.3/IML74K/20120303:eng/test-keys
ro.build.characteristics=tablet
# end build properties
# system.prop for M1 reference board
# This overrides settings in the products/generic/system.prop file
#
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=160
keyguard.no_require_sim=1
#set keyguard.enable=false to disable keyguard
keyguard.enable=true
ro.statusbar.widget=true
ro.statusbar.button=true
ro.statusbar.yearmonthdayweek=true
# Status bar customization
ro.statusbar.widget.power=true
#
persist.sys.storage_preload=1
#
wifi.interface=wlan0
ro.ethernet.interface=eth0
mobiledata.interfaces=pdp0,wlan0,gprs,ppp0
# Time between scans in seconds. Keep it high to minimize battery drain.
wifi.supplicant_scan_interval=200
#
# Wireless speed increase
net.tcp.buffersize.default=4096,87380,110208,4096,16384,256960
net.tcp.buffersize.wifi=524288,1048576,2097152,262144,524288,1048576
net.tcp.buffersize.umts=4094,87380,110208,4096,16384,256960
net.tcp.buffersize.gprs=4096,87380,4096,16384,256960
net.tcp.buffersize.edge=4093,26280,35040,4096,16384,35040
net.tcp.buffersize.evdo_b=4096,87380,4096,16384,256960
net.tcp.buffersize.lte=524288,1048576,2097152,262144,524288,1048576
net.tcp.buffersize.umts=4096,87380,4096,16384,256960
net.tcp.buffersize.hspa=4094,87380,262144,4096,16384,262144
#
# 3G Signal Optimization Tweaks
ro.telephony.ril_class=
ro.ril.hsxpa=3
# ro.ril.gprsclass=10
ro.ril.gprsclass=12
ro.ril.hep=1
ro.ril.enable.dtm=1
# ro.ril.hsdpa.category=10
ro.ril.hsdpa.category=16
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
# ro.ril.hsupa.category=5
ro.ril.hsupa.category=8
#
#alsa.mixer.playback.master=DAC2 Analog
#alsa.mixer.capture.master=Analog
#configure the Dalvik heap for a standard tablet device.
#frameworks/base/build/tablet-dalvik-heap.mk
dalvik.vm.dexopt-data-only=1
dalvik.vm.heapstartsize=10m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=512m
dalvik.vm.checkjni=false
#Dalvik.Optimization
dalvik.vm.verify-bytecode=true
# dalvik.vm.dexopt-flags= (v=n,o=v or m=y or m=v,o=y)
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.execution-mode=int:jit
dalvik.vm.lockprof.threshold=500
# dalvik.vm.jniopts=forcecopy
#
# Disable un-supported Android feature
hw.nopm=false
hw.nobattery=false
hw.nophone=false
hw.novibrate=true
hw.istablet=true
hw.cameras=1
hw.hasethernet=true
hw.hasdata=true
ro.hardware=amlogic
ro.platform.has.touch=true
# Wi-Fi sleep policy
ro.platform.has.sleeppolicy=false
#set to 0 temporarily so touch works without other changes
ro.sf.hwrotation=270
#0~7 You are required to get the correct install direction according the sensor placement on target board
ro.sf.gsensorposition=4
ro.sf.ecompassposition=4
allow_all_orientations=1
#
# Use OSD2 mouse patch
ro.ui.cursor=1
#Faster Scrolling
windowsmgr.max_events_per_sec=60
ro.min_pointer_dur=8
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#
#Render user interface with the GPU
debug.sf.hw=1
ro.config.disable.hw_accel=false
persist.sys.ui.hw=1
debug.egl.hw=1
debug.composition.type=gpu
#Force homelauncher into memory (disable =0)
ro.HOME_APP_ADJ=1
#
#Overall performance/responsiveness increase
debug.performance.tuning=1
#Video acceleration enabled
video.accelerate.hw=1
#help to free up unused ram
# persist.sys.purgeable_assets=1
#
# Enable 32-bit OSD
sys.fb.bits=32
#
# Disable GPS
gps.enable=true
#
# Enable player buildin
media.amsuperplayer.enable=true
media.amplayer.enable-codecs=asf,wav,aac,mp3,m4a,ape,flac,alac
media.amplayer.enable=true
media.amsuperplayer.m4aplayer=STAGEFRIGHT_PLAYER
media.amsuperplayer.defplayer=PV_PLAYER
media.amplayer.thumbnail=true
media.amplayer.widevineenable=true
#
#Better video streaming
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-rtsp=true
media.stagefright.enable-http=true
media.stagefright.enable-record=true
#
# HDMI
ro.hdmi480p.enable=true
rw.fb.need2xscale=ok
media.amplayer.osd2xenable=true
#Dual display
ro.vout.dualdisplay2=true
#
#camera DCIM dir,0:sd only,1,nand only,2,sd first
ro.camera.dcim=2
# Disable preload-class
ro.amlogic.no.preloadclass=1
#Camera/camcorder enhancements, improve jpeg quality
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.capture.maxres=4m
ro.media.panorama.defres=2612x1840
ro.media.panorama.frameres=1024x720
ro.camcorder.videoModes=true
ro.media.enc.hprof.vid.fps=60
#
# App optimization
ro.app.optimization=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.opengles.version=131072
ro.config.ringtone=ArgoNavis.ogg
ro.config.notification_sound=pixiedust.ogg
ro.config.alarm_alert=Plutonium.ogg
#
#Disable error checking (speeds things up a bit)
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
ro.kernel.qemu=0
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#Disable.Google.OTA.Checkin
ro.config.nocheckin=1
#
keyguard.no_require_sim=true
ro.setupwizard.mode=OPTIONAL
ro.com.android.dateformat=dd-MM-yyyy
ro.com.android.dataroaming=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.error.receiver.system.apps=com.google.android.feedback
ro.setupwizard.enterprise_mode=1
drm.service.enabled=true
ro.carrier=
ro.gsm.sim.operator.numeric=
ro.gsm.sim.operator.alpha=
ro.gsm.sim.operator.iso.country=
ro.gsm.operator.iso=
com.ti.omap_enhancement=true
com.ti.omap_enhancement_s3d=true

 

[ZeroTolerance]

I wonder if some build.prop tweaks would make your tablet feel a little bit smoother or not?

Just replace /system/build.prop with your one, right? Done, reboot, playing with interface, surfing the web. No, I don't see any noticeable changes. Antutu result is also same. Info in Settings > About tablet is updated.

I think it's a hardware limitations and I just want too much from this cheap device Can assist you in any further experiments/testing though, if will need (until I sell this tablet to someone else).

 

[Pas]

Last week i was on holiday, so couldn't response

Nice to see, that somebody is using the Zenibasic Rom for the C92 :db:

I think there was only a small amound produced.

I'll change the wrong numbering in next update, enjoy the Rom !

 

[Gstudio]

Just one question.

I Installed v1.3 and it works fine but I have a problem with this app (bought!!)

https://play.google.com/store/apps/details?id=com.mingoville.funclock.free

with stock firmware no problem, but with zenibasic v1.3 app hangs at boot (I tap on the icon, screen became black and in a few second I come back to the android main screen). Developer sent me a special version of the APP for the debugging but it hangs before generate logs.

Can you try the APP and tell me why it doesn't work? It's the only APP cause me problems.

Thanks

 

[libertas]

Hi,

The top post of page 1 shows a link to version 1.3, but Pas shows v1.3.1 as the footer. So, where can I download version 1.3.1, the one I suppose is the latest.

 

[omarahum]

Hi,

The top post of page 1 shows a link to version 1.3, but Pas shows v1.3.1 as the footer. So, where can I download version 1.3.1, the one I suppose is the latest.

1.3 is the latest version..... I asked Pas once about the +0.0.1 once, he said he usually customizes the ROM he uses on his tablet slightly than the one he shares, thus the addition of the .1 at the end in his signature....

 

[Unbricked]

Hi folks,

Just want to report the v3.1 download link is broken. Looks like putlocker has been replaced by firedrive -- but it's as simple as replacing "putlocker.com" with "firedrive.com" in the link (this)

 

[videoenmedia]

Anyone still have this file somewhere?

I like to give my old C91 a new life

 

[omarahum]

Anyone still have this file somewhere?
I like to give my old C91 a new life

The link in the post above yours works.

Hi folks,

Just want to report the v3.1 download link is broken. Looks like putlocker has been replaced by firedrive -- but it's as simple as replacing "putlocker.com" with "firedrive.com" in the link (this)

 

[nohead88]

Is the link to download the version 1.3 still working? Can't make the download work at my side. Thanks for any help...

 

[Pas]

I've added a new link to mediafire:

http://www.mediafire.com/download/qz97d628jp9713l/Zenibasic+v1.3.rar

 

[usabmaster]

I just installed this image, but when I start the play store, it asks me for my google account. I enter my credentials, but it isn't possible because of user/password, even they are correct.

I've enabled 2factor-auth, does that matter?

thanks in advance!

----EDIT----

I just found the solution.

As the default gapp in ICS doesn't support two-factor auth completely, just create an application specific password. this works.