Android Tablets Forum banner
1 - 20 of 155 Posts

·
Registered
Joined
·
153 Posts
ZeniBasic v1.3 12-12-13

Hi All,

This Rom is for c91 2a/2n/3n/3a/1a upgr./1n upgr and C92 model!

The c91 2a/2n/3n/3a runs on 800mhz (900mhz available)
The c91 upgrade 1a/1n and c92 runs on 1000mhz

Download :

Zenibasic v1.3

v1.3

- full screen mode added, you can adjust it in setting->display-> fullscreen mode
- all kernels now have 2GB internal memory partition
- 900mhz kernels availabe for 2a/2n/3n/3a
- Zt-280 C92 kernel added
- (noob) installation guide added
- All apps are now 'system' apps, so the apps will still be there after a factory reset.
- added free titanium backup app, so it is possible to delete the 'system' apps
- update all apps
- added latest Playstore.apk in 'media' folder for fast install

installation :
(click here for 'noob' installation guide)

Copy all the files from inside the ZT-280 C91_3a/ZT-280 C91_3n/ZT-280 C91_2n/ZT-282 C91_upgr_1a or ZT-282 C91_upgr_1n folder according to your device.
into the 'zt-update' folder and replace files if asked.(or you can select 900mhz version in the '900mhz version'folder)
Then copy the 'zt-update' folder to your tf card

bootup your device and hold down the camera button
and press the camera button again, when asked
But don't procede, if it says you have a dismatch, check your device type again.
For C92 device you just boot up, but don't forget to delete the zt-update folder for next bootup !
You need to install flash manual from the internal memory folder.

I'm not responsible if it bricks your device, but i've flashed hunderds zenithink tablets and never bricked one

Known issues :

- You have to install flashplayer 10.2 manual from the 'internal memory' folder
- No mousepointer in hdmi mode for the c91 models.
In settings->developer options you can enable 'show touches' for use touchpanel.

Thanks to :

Omarahum -> for the modded Kernels and recovery files !
Cracktech -> for several tweaks
Christian Troy -> for the G-sensor fix, and providing it to Zenithink
Sanek_6630 -> for full screen mod

v1.2.1
download
- G-sensor fix (tiliting) for games like 'temple run'

v1.2

- rework on the Rom, inlcuded all possible files in the system file
- added ASR app for boosting Mic
- added speakerboost app for boosting speakers(use at own risk)
- added filebrowser app, for faster filebrowsing then using esfile explorer
- latest 10.2 flashplayer is available in the internal memory, for some reason it can't install automaticly
- upgraded root app to SuperSU v1.25 (free version)
- added all tweaks from cracktech work
- fixed the mousepointer for the c91 models
- update gmail app
- include 2a files and corrected 2n files
- used cracktech buildprop
- Buildprop line added, to run latest youtube

v1.1
- added ADW Launcher as standard launcher
- added the voicesearch, that was removed in first release
- added the Google quicksearch, that was removed in first release

v1.0
- Made the Rom compatible with c91, c91 upgr. models
- cleaned the Rom from all apps, wallpapers and more.
- only the most standard apps are in this rom, and most of them can now be removed.
- added the buildprop with tweaks and full market from the justingeek Rom, re-enabled 3G
- updated the superuser app to 3.13
- added es file explorer and the 10.2 flashplayer in the standard installed apps
- added the AC3/DTS fix

Orange Gesture Font Red Art
Communication Device Gadget Operating system Font Screenshot

Hope, you like the Rom !
 

Attachments

·
Registered
Joined
·
2 Posts
Hi,
I installed this ROM on ZT-282 upgrade (1a) which was smooth process and so far no issue.
Just one note here so far I can see, "The c91 upgrade runs on 1000mhz with 2Gb partition", 1GHz is correct, but partition is only 1GB. (870MB).

from first look is very fast.

Tomas
 

·
Zenithink Tablet User / Information Transmitter
Joined
·
6,629 Posts
Hi,
I installed this ROM on ZT-282 upgrade (1a) which was smooth process and so far no issue.
Just one note here so far I can see, "The c91 upgrade runs on 1000mhz with 2Gb partition", 1GHz is correct, but partition is only 1GB. (870MB).

from first look is very fast.

Tomas
Seems it's the same probem as justinthegeek's 0818 fatfree ROM, they packed my OCed + 2GB data kernel, but left the stock Zenithink recovery file.... If you download the correct recovery I made (rename it to just ZT282.recovery) and reflash the ROM replacing the recovery file, you should have a 2GB (1.8GB) data partition
- http://www.mediafire.com/file/dzz1a81q7fu1dq6/0818_H3_1a_800MHz_2GBData_ZT282.recovery
 

·
Registered
Joined
·
153 Posts
Discussion Starter · #7 ·
I'll add the correct recovery file as soon as possible

@Omarahum

the recovery file it says 800Mhz, i'd like it to be 1Ghz.
Or doesn't the recovery file effect the cpu speed ?
 

·
Zenithink Tablet User / Information Transmitter
Joined
·
6,629 Posts
I'll add the correct recovery file as soon as possible

@Omarahum

the recovery file it says 800Mhz, i'd like it to be 1Ghz.
Or doesn't the recovery file effect the cpu speed ?
The recovery file is only used when you flash a ROM, otherwise the kernel is used, that's why I didn't think it was important to overclock the recovery....
 

·
Registered
Joined
·
21 Posts
have bug in 3g section whit usb 3g doongle choice operator restarts the device

if you do not do any action
no problem

3g usb doongle perfect

sorry my bad english
 

·
Registered
Joined
·
5 Posts
Hey guy,

Good work ! I'll test it for a few days before leaving further comments. I personnaly put ADW on it cause i find it smoother.

BTW, no overclock for c91 1G ?
 

·
Registered
Joined
·
153 Posts
Discussion Starter · #12 ·
@freedgt,
Do you mean the voice search ?
About the 3G function, i didn't change it, so maybe it is an error in the standard 0818 rom

@Albert911,
yes, let me know what your findings are after a few days.
I've checked out the adw launcher and it response smoother, maybe i'll use it as standard in next release.

for overclock, you can use another kernel file, made by omarahum
The c91 upgrade is 1000mhz, and that is 'overclocked' by default it is 800mhz
the c91 i've left it on 800mhz, i'll check if it is possible to add a 900mhz version in next release.
a 1000mhz isn't stable enough for most c91 tablets
 

·
Zenithink Tablet User / Information Transmitter
Joined
·
6,629 Posts
@Pas in original firmware voice control
speech recognition

How can I activate function?
Looks like he removed the VoiceSearch.apk from the ROM. If you install it, it should start to work again...
 

·
Registered
Joined
·
153 Posts
indeed, i deleted the quicksearch and voichesearch, because i thought you can install it again from the playstore.
but it will not show up in the playstore on the device.
I will add them again in the next release.
 

·
Registered
Joined
·
21 Posts
indeed, i deleted the quicksearch and voichesearch, because i thought you can install it again from the playstore.
but it will not show up in the playstore on the device.
I will add them again in the next release.
not compatible app
by playstore

now reflash original firmware

I use device

your work to be still good
 

·
Zenithink Tablet User / Information Transmitter
Joined
·
6,629 Posts
not compatible app
by playstore

now reflash original firmware

I use device

your work to be still good
You don't have to reflash your tablet with the stock ROM, just extract the Voicesearch.apk from the stock system.zt280.tar.bz file and try to sideload it (just install like a regular apk), and if that doesn't work, since this ROM is rooted, just place it in the /system/app folder and reboot....
 
1 - 20 of 155 Posts
Top