Android Tablets Forum banner
41 - 55 of 55 Posts

·
Registered
Joined
·
1 Posts
Help please my touch screen is not responding and i think its bc i didnt back-up the env_uboot and wmt_scriptcmd files from my devices factory firmware.

WHAT SHOULD I DO??? IS THERE ANY HOPE?

my device is VIA WM8650 7"
+1 !

Mine is made by Innovatek, 7" http://innovatek.cn/catalog/innoandroid-p-1019.html
Green LED on Power, red on charging
Black for audio jack
30 pins at USB port
CPU: 800 Mhz VIA8650
RAM: 256 MB
Without vibration
It say that have 4GB, but it seem that's only 2
From "About" menu (before flashing, without any back-up of factory files
) :
Model number -> WonderMedia WM8650
Android version -> 2.2
Kernel version -> 2.6.32.9-default
Build number -> generic-eng2.2 Froyo ver1.5.5-20110920 043830

I have tried many option on Changer menu, but never work sound and touchscreen after flash.
What option should I choose?
Or, there is an smarter user here wich have a back-up of factory files?
Thanks in advance for answers!
 

·
Registered
Joined
·
17 Posts
Help please my touch screen is not responding and i think its bc i didnt back-up the env_uboot and wmt_scriptcmd files from my devices factory firmware.

WHAT SHOULD I DO??? IS THERE ANY HOPE?

my device is VIA WM8650 7"
Hi laydlove
This is what mine is and I found the Factory Firmware at the link below Hope this helps.
Info on tablet

model number :
wondermedia wm 8650

Android version:
2.2

Kernal version
2.6.32.9

Build number
generic-eng2.2 froyo Ver1.5.5-20110920.043830

Duel touch
Got it from China came with an external keyboard has Mid on the box. No vibration and has a green light.

http://www.merimobiles.com/Firmwares_Downloads_s/393.htm


Just be carefull of what you put on it And try to get a positive ID on your tab. Took me a few weeks to get my firmware. So use the site above to see if any of the tabs there are the same as yours.
 

·
Registered
Joined
·
1 Posts
It is! you do not need two different Uzimage is 1.5.3

try to extract GreenLedVibDualPointTouch.env_uboot.zip
in SDcard in firmwareinstall/env
accept if ask to overwrite en_uboot

good luck
Thank you for this, my wife & I bought her nephew a 7" MID WM8650 Build 1.5.3 with a green LED. I didn't realiz that a blue LED and a green was such a big deal.

 

·
Registered
Joined
·
8 Posts
Greetings all,

its been a while since I have been on the forums as I was fairly satisfied with running Uberoid on my VIA 7" (Green LED, Black headphone), and I was asked to prepare another tablet of the same specs with Uberoid, and for some reason, I just could not get it to fully install like normal, never mind though.

I thought I would check back and found this version on here, and I installed on the other VIA 7" without changing any settings, and installing it directly as setup with the latest update. This is superb, and works perfectly, much smoother and much cleaner of an install, which is amazing.

Thank you for this version, and I shall make sure that I spread the word! Much Kudos
 

·
Registered
Joined
·
6 Posts
Ok I tried to find out as many things as possible for me.. lol
So I need to ask the popular question: Which tablet is this??
I tried with system info apps and Examples from Internet and I still think that I have written stupid things in the following.. I am very sorry..

Modelnumber: WonderMedia WM8650 (the manual says VIA WM8650)
Android: Froyo (2.2)
Kernel: 2.6.32.9-default
Build: generic-eng 2.2 Froyo Ver1.5.3-20110819.122300

Name: ARM926EJ-S rev 5 (v5L)
Freq: unknown
Cores: 1
Architecture: 5TEJ
BogoMIPS: 797.97 Mhz
Hardware: WMT
Features: swp half thumb fastmult edsp java

General specs:

Processor: VIA WM8650
Frequency: 800MHz + 400Mhz DSP
Memory: 256 MB DDR2
Flash Memory: 2GB NAND
Microphone: Internal
Reset Button
Power button voice + _
Home button
Display Resolution: 800*480
Screen size: 7"
TFT: Resistant touch screen
Screen Layout=35 (LARGE|YES)
Touch Screen=3 (FINGER)
Touch screen: ------Supports resistive touch two points (*if hardware is compatible)----------
Rotation=3 (270 degrees)
Camera: 1600x1200
GPS: No
Bluetooth: No
3G: external 3G function
Video: mpeg, mpeg1...- mpeg4....
G-Sensor: 4 way G-sensor * (actually a WMT 3-axis accelerometer!?!?)
Network: WLAN/WiFi IEEE 802.11b/g, 10/100 MB Ethernet
Audio port: 3.5mm Headset in black
USB: Micro JAG USB/RJ45
SD: TF up to 32GB
Operating System: Android 2.2
Flash: v10.1
Adapter: INPUT: 100-240VAC 50/60 HZ // OUTPUT: 9.0 V 1500 mA

Build Fingerprint: generic/ generic/ generic/:2.2/Froyo/v1.2.0-20110819.181742:eng/

Green LED / red when charging
Audio port: black
Vibrates: yes

Here are some pics from the tablet... the manual calls it "X-177" but I did not find many things according to this name.. And I really dont like the picture on the manual with a grey Home Button. My Tablet is black, that button too.
The pics are not good.

http://dl.dropbox.com/u/57585038/IMG0181A.jpg
http://dl.dropbox.com/u/57585038/IMG0182A.jpg
http://dl.dropbox.com/u/57585038/IMG0185A.jpg
http://dl.dropbox.com/u/57585038/IMG0186A.jpg
http://dl.dropbox.com/u/57585038/IMG0187A.jpg
http://dl.dropbox.com/u/57585038/IMG0188A.jpg
http://dl.dropbox.com/u/57585038/IMG0190A.jpg
http://dl.dropbox.com/u/57585038/IMG0192A.jpg

Thank you and please excuse my bad english!
 

·
Registered
Joined
·
4 Posts
I solved the problem of battery bug as follows:

I opened the env_boot with notepad and pasted it there at the end of the file the following code

setenv wmt.vt160x.bat 1:0:10:0

I saved, copied to the sd and installed the rom

Sorry for bad English .. I just want to share and help those who are having the same problem. I loved this ROM and is now 100% functional.
 

·
Registered
Joined
·
8 Posts
Hi Guys,
Just thought I would post, because I have no touch screen.

I hated the original firmware because it was too bloaty and heavy.
It also did not work with Siemens Gigaset Wifi Routers, and didnt work with ANY Linksys Router, but it did connect to Belkin - ALL Configured to use WPA2 Authentication. (if that helps)

Now..
I ran the rom update and after several roms, versions etc.. I now have a screen to look at which is very Nice, but no touchscreen.
I can drive is if I use a USB mouse attached to the dongle that it comes with.

However;
I struggled (as many others did) with the identification of the tablet.

So....
I now think I have an EKEN M003s.
It says VIA CPU on the back and nothing else really..
I lost the manual and box ages ago.
It runs Android 2.2 (would love something a bit higher if possible)
Says its Wonder Media 8650 in the about section.
the Android version it ran was a froyo - eng version.

I now have uberoid on it, but would like to have the screen and sound (if it doesnt work)
LED is red when charging and Green when booting (on)
Pictures attached for anyone who can help me wind out what this is.
I actually purchased this from "lightinthebox.com" as ePad 8"

I'm not a complete noobm, but sadly I am to the world of Android...

Furniture Computer Netbook Wood Communication Device

Wood Gas Technology Flooring Hardwood

Watch Tablet computer Output device Communication Device Gadget
 

Attachments

·
Registered
Joined
·
3 Posts
+1 !

Mine is made by Innovatek, 7" http://innovatek.cn/catalog/innoandroid-p-1019.html
Green LED on Power, red on charging
Black for audio jack
30 pins at USB port
CPU: 800 Mhz VIA8650
RAM: 256 MB
Without vibration
It say that have 4GB, but it seem that's only 2
From "About" menu (before flashing, without any back-up of factory files
) :
Model number -> WonderMedia WM8650
Android version -> 2.2
Kernel version -> 2.6.32.9-default
Build number -> generic-eng2.2 Froyo ver1.5.5-20110920 043830

I have tried many option on Changer menu, but never work sound and touchscreen after flash.
What option should I choose?
Or, there is an smarter user here wich have a back-up of factory files?
Thanks in advance for answers!
hi,
try this firmware
http://www.4shared.com/zip/oKhrNkXw/E10_M788P-V157.html

Instructions:
1. download the file
2. format a 4Gb Sdmmc
3. extract the contents to the memory card
4. safely remove it after the copying process
5. make sure your tablet PC is turned off and that it is fully charged
6. insert the memory card in the slot of your tablet
7. power on the tablet
8. wait for the installation process to end
9. when you see the message at the bottom to remove the sd card "Remove It"
IMP* the first booting will consume a little time.. have apatience

Note: if during the installation process if any Errors such as
"Cannot Upgrade Kernal Nand" and
"*Error mounting Android Partition" etc.,
Then turn off your tablet follow the steps 10-12

10. Download files from below make sure you create a new folder for each file namely fix1 and fix2
Fix1. http://www.4shared.com/file/obPwUPVj/uzImage.html
Fix2. http://www.4shared.com/file/hCrsXM3v/uzImage.html

11. copy uzImage.bin from the folder fix1 to: /firmwareinstall folder on the sd card. Windows should prompt for overwrite answer yes
12. start from step 5

If the above said error still persists then Then turn off your tablet follow the steps 13 and 14

13. copy uzImage.bin from the folder fix2 to: /firmwareinstall folder on the sd card. Windows should prompt for overwrite answer yes
14. start from step 5
 

·
Premium Member
Joined
·
7,365 Posts
snipped quote for cc
Pm sent to request alternate file hosting. Please note SLD does not allow sharing files that force members to register at another site.

Thanks for your cooperation and understanding.

Forum Rules

p.s. If anyone has an an alternate mirror, please post.
 
41 - 55 of 55 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top