Android Tablets Forum banner
1 - 20 of 203 Posts

·
Registered
Joined
·
1,815 Posts


LAST UPDATE FEB/7/2013

V7RC1 FIXED SETTING FC,Mirror link
*Based OFFICIAL Pipo MAX M1 12/17/2012
*CHINISE APP REMOVED
*HACKER'S KEYBOARD(STOCK KEYBOARD REMOVED)
*Rooted
*Google apps updated
*STOCK LAUNCHER REMOVED(TREBUCHET LAUNCHER REPLACE)
*Build prop tweaked more battery idle standby nexus 7 spoof for more app on market
This rom may work on other rk3066 tablet will depend if your manufacture kernel.img and boot.img support ICS, JB or both

V6pipo-u1-20121031 update kernel,boot cwm rkbatchtool
*Based OFFICIAL Pipo U1 10/31/2012
*Complete Clean chinise app & widget
*slimer remove over 140MB files not need
*Rooted
*Holo Launcher HD
*Ringtone folder removed
*Build prop tweaked more battery idle standby nexus 7 spoof for more app on market
*default icon systemui.apk

V5 For U1 not tested on max m1 should work but battery wont be perfect in theory i think
*Tested on my U1 not yet on the Pipo max m1 should work on as normal but my theory is that battery wont be accurate since it have u1 battery fix
*Based N101_20120920
*Hacker's Keyboard (require manual install apk on /system/Darkapps
*auto Scrip( will be soon included for aftermark apps auto install Very soon
*Root Now work
*1 Mobile Market (forgot to mention on other release

*Ringtone folder removed
*New boot animation
*Build prop tweaked more battery idle standby add support for GT-I9100 apps Need testing(THANKS Anubikai for the help)
*Battery icon Bug not refreshing, Now work and show charging % as normal on pipo u1
*Density change to 200
*Framework from pipo u1 Firmware include Status bar Volume keys & screenshot
*System UI from Pipo u1 Firmware

VOLUME BUTTONS REMOVER FIX
(THIS ZIP WILL REMOVE THE VOLUME AND SCREENSHOT BUTTON FROM STATUSBAR

DENSITY FIX FOR V5
USE ONLY FOR 9.7" TABLET
TESTED ON AOSON M11,PiPO Max M1 - change density from 200 to 160 can be also use on the U1 if you want lower the dpi but not necessary.
Flash v5 rom and then without restarting the clockwork recoveery flash the density fix.

V3
*New Based N101_20120920
*Root Now work
*New boot animation
*Build prop tweaked
*Battery Bug still not Fix
*Density change to 200

V1
*New Rom based N90 II 20120823
*FASTER(any bug let me know)
*WIFI&BLUETOOTH Work
*Not ROOTED(Flash this to root)
*CHINESE APPS GONE
*OFF APP FOR REBOOT TO RECOVERY OR BOOTLOADER NEED ROOT

*GO LAUNCHER HD
*BUILD.PROP (IS STILL STOCK )
Bugs on Pipo u1:-----------------------
battery icon not displaing when plug to ac restarting will refresh the %

Here i show how its working on the Pipo MAX M1 (sorry about my accent i'm a Latino my main laguage is Spanish

Also sorry about the video i know it crop but it was my Htc Vivid custom rom camera on 720p mixed the resolution
it example it should record it 1280x720 but it record it as 720x1280
i dont know how to fix it. i will try soon another rom
---HOW TO INSTALL---
1.AS ALWAY USE AT YOUR OWN RISK(but should work do a nand backup just incase)
2.Copy GeneRickModRCx.zip to a micro sdcard
3.Download & Install Pipo U1 FINLESS CWM RECOVERY here
4.Wipe data/factory reset
5.Wipe dalvik cache(advanced)
6.Wipe battery stat(if you fill battery % not accurate)
7.Format /system (mounts and storage)
8.Flash GeneRickModRCx.zip
9.Reboot (should pass the first bootaninamtion in seconds and show my boot animation)
 

·
Premium Member
Joined
·
1,516 Posts
Agreed I'll move it when I'm next on my PC.

EDIT: Done.

Jez
 

·
Registered
Joined
·
2,176 Posts
I don't have an M1 handy (just sent them all out again) otherwise I would test for you. In terms of roms though I would guess there is a fair chance it won't work on the M1. It is kind of a 50/50. Yes they are the same platform, but the "accessory" hardware like the touchscreen controller, cameras, etc. can be different. So while the rom might flash, and it might even boot, you will often end up with other problems. Just a heads up to anyone who is testing.

Welcome to the fray though
. More ROM Development is a very good thing!

Cheers!

Roman
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #5 ·
I have tested the original m11 firmware 4.1 on the u1 and work perfect thats why i say i should work cuz even wifi and bluetooth worked fine since this is only flashed via clockwork and only flash and modified the system no boot or kernel changed and if doesnt work for you just reflash the system.img via rk batchtool or nand restore via cwm

Sent from my HTC VIVID using Tapatalk 2
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #8 ·

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #10 ·
Have you installed it ? And if it yes on what pipo model

Sent from my HTC VIVID using Tapatalk 2
 

·
Registered
Joined
·
27 Posts
my device is Pipo U1.

from some reason the battery indicator doesn't update when plugged to power supply(but it is charging the device due)
there is no build in root permission, and ZHUODashi tool doesn't seem to work.
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #12 ·
Zhuodashi worked for me but need to reroot it 2 time

Sent from my HTC VIVID using Tapatalk 2
 

·
Registered
Joined
·
1,815 Posts
I found out replacing the /system/framework/framework-res.apk the battery icon get fixed again but lose the rotatescreen funtion. Maybe replace the power.XML inside the framework-res.apk so rotate don't get unfuntion this just happened to the U1 Cruz i,'m using MX m1 and battery work fine.
 

·
Registered
Joined
·
1,815 Posts
does anyone know how to modified the updater-script ? i need to modified since there is a problem for my rom jb to get root when flashed.
the script show a:
symlink("busybox", "/system/xbin/[", "/system/xbin/[[",

where i think i need to change it to:
symlink("/system/bin/su", "/system/xbin/su");

notepad or workpad open the file but break it if you save it
 

·
FW Developer
Joined
·
745 Posts
does anyone know how to modified the updater-script ? i need to modified since there is a problem for my rom jb to get root when flashed.
the script show a:
symlink("busybox", "/system/xbin/[", "/system/xbin/[[",

where i think i need to change it to:
symlink("/system/bin/su", "/system/xbin/su");

notepad or workpad open the file but break it if you save it
Notepad ++ should work and its free.

It probably doesn't need sy link though. It probably needs permissions set.

Sent from my Galaxy Nexus using Tapatalk 2
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #16 ·
i try notepad++ but i get error
 

·
Registered
Joined
·
8 Posts
hello darkrickpr,
i have a pipo u1 and have problem with the driver instalation,
however i had sucsses putting CWM and i changed to youre ROM.
i am very happy with it but because (i guess) the rom is not ment to be for the pipo, i have few bugs:

1.the battery status is not updating, to get update on the battery status i have to restart the pipo. (pretty minor, i can live with it)

2. i have problem with video, i cant see video, not on the tablet and not online (like youtube), i can only hear the sound.

and the last thing is not a bug its just that because i cant root the tablet with my computer i need a rooted rom.

if there is a possibility you can create a version that fully suport the PIPO U1
thats will be awesome!
thanx.
 

·
Registered
Joined
·
1,815 Posts
you can root it with the Root my generick with(CWMZIP)Jellybean i post and flash it on cwm it works. about the battery still testing it i looks like it is the framework-res.apk need modification on the power_profile just cant open it without errors, you video i have tested it and it work for me no problem even 720p? did you format system data factory reset?
 

·
Registered
Joined
·
8 Posts
you can root it with the Root my generick with(CWMZIP)Jellybean i post and flash it on cwm it works. about the battery still testing it i looks like it is the framework-res.apk need modification on the power_profile just cant open it without errors, you video i have tested it and it work for me no problem even 720p? did you format system data factory reset?
thank you for the fast respond and help,
i have flashed the root and its not working for me i tryed several time in different ways, but every time
get in the superSU and he try to instal and fail.
i have foramat system data factory but the video its still not working. :\
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #20 ·
I'm working on a new base soo will be released and include the root working
 
1 - 20 of 203 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top