Android Tablets Forum banner

[ROM]CyanogenMod 10 [UPDATED: 12-11-17]

318203 Views 1110 Replies 189 Participants Last post by  Stefan_G
Christian Troy has been kind enough to release a Fire Compatible CWM AND A Fire compatible CM10!
The ROM is stable, but the compatibility file needs more work. This ROM uses Feiyu 0930 Kernel.

Features (Ripped from Aurora II post)

* UbiFS (like stock roms)
* Bluetooth USB dongle support
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* Veno congestion control algorithm

Before flashing a fresh CM rom please wipe media partition with stock recovery then continue with below instructions

1. Extract uImage_recovery from CWM- to external SD card (XX is QM or TM)
2. Copy, and to the external SD card
3. Reboot the tablet in CWM recovery mode (Power + Volume -)
4. Select Wipe Data/Factory reset and confirm the format
5. Choose "Install zip from SD card", select "Choose Zip from SD card" and select first.
6. Next select
7. Lastly select (You can then apply any patches if available)
8. Reboot the tablet


* Other minor stuff
* Updated upstream sources

Rom - Gapps (2012-10-11)

Compatibility zip

* Fire TM v1.5 - CWM v5.5.0.4
* Fire QM v1.6 - CWM v5.5.0.4
Auto Brightness will increase, but may not decrease. Please comment if Auto brightness is fully working for you or not.
There are some pics of it.

If you feel this has benefited you, please donate to him!

Please post any comments or issues you have with the ROM here.
See less See more
  • Like
Reactions: 2
1 - 4 of 1111 Posts
Why did you make this post and not Christian Troy?
That is terrible to hear.

It's actually not difficult to make a full fire release. All that needs to be done is merge the compatibility zip with the main release, but it's not done that way so that internet bandwidth can be saved.

The kernel in CWM should not have fried your touch screen because it is based on 0930, but I guess rebooting the Elf II kernel is a very bad idea. I don't have any solution for you except to keep trying other roms or something.
Yeah it's kinda hazardous to offer the rom in this format. Especially when there seems to be a lot of people who don't understand English.
how to use the CWM for TM? coz i can't flash the rom... always .. E:SIGNATURE VERIFICATION FAILED
You can't flash it with the original recovery. You need to use CWM. Just unzip the CWM package to your memory card's root.
Though you should learn to read before trying to flash anything.
Sorry Christian. Seems that you already told about, bat i can't find. If i flash CWM, is there way to return to stock recovery?
You aren't "flashing" CWM. Just remove the CWM file from your memory card and it's gone.
1 - 4 of 1111 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.