[ROM]CyanogenMod 10 [UPDATED: 12-11-17]

318340 Views 1110 Replies 189 Participants Last post by Stefan_G, Feb 27, 2013

novadaemon

Discussion Starter · Oct 17, 2012 (Edited by Moderator)

Christian Troy has been kind enough to release a Fire Compatible CWM AND A Fire compatible CM10!
The ROM is stable, but the compatibility file needs more work. This ROM uses Feiyu 0930 Kernel.

Features (Ripped from Aurora II post)

* UbiFS (like stock roms)
* Bluetooth USB dongle support
* USB GPS support (cp210x and pl2303)
* Xbox 360 gamepad support (xpad)
* PS3 USB gamepad support (hid-sony)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* OpenVPN support (tun)
* Veno congestion control algorithm

Instructions
Before flashing a fresh CM rom please wipe media partition with stock recovery then continue with below instructions

1. Extract uImage_recovery from CWM-5.5.0.4-fire_XX.rar to external SD card (XX is QM or TM)
2. Copy cm10_elf2_2012XXXX.zip, gapps-jb-20121011-signed-ubifs.zip and fire_XX-cm10-compatibility-X.X.zip to the external SD card
3. Reboot the tablet in CWM recovery mode (Power + Volume -)
4. Select Wipe Data/Factory reset and confirm the format
5. Choose "Install zip from SD card", select "Choose Zip from SD card" and select cm10_elf2_20121018.zip first.
6. Next select gapps-jb-20121011-signed-ubifs.zip
7. Lastly select fire_XX-cm10-compatibility-X.X.zip (You can then apply any patches if available)
8. Reboot the tablet

Christian Troy said:
2012-11-17

* Other minor stuff
* Updated upstream sources

Rom - Gapps (2012-10-11)

Compatibility zip

* Fire TM v1.5 - CWM v5.5.0.4
* Fire QM v1.6 - CWM v5.5.0.4

Issues:
Auto Brightness will increase, but may not decrease. Please comment if Auto brightness is fully working for you or not.

http://www.slatedroid.com/topic/39456-how-hard-would-it-be-to-port-the-aurora-iis-cm10-to-the-fire/page__view__findpost__p__441722
There are some pics of it.

If you feel this has benefited you, please donate to him!

Please post any comments or issues you have with the ROM here.

See less See more

Reactions: 2

1 - 20 of 1111 Posts

rnakpatel

· #2 · Oct 17, 2012 (Edited by Moderator)

No freaking way!!
Couldn't thank you enough!

A few questions, though.

Is the provided CWM safe for use on the fire i.e does it use one of the newer Feiyu Kernels?

Also, is this ROM based of the older source code which does not have the required fixes for the touch screen?

novadaemon

Discussion Starter · #3 · Oct 17, 2012

rnakpatel said:
No freaking way!!
Couldn't thank you enough!

A few questions, though.

Is the provided CWM safe for use on the fire i.e does it use one of the newer Feiyu Kernels?

Also, is this ROM based of the older source code which does not have the required fixes for the touch screen?

The CWM recovery is based off of the Feiyu 0930 Kernel. It should not break touch screens.
The ROM is built from CM10 Source. The release itself is the same release in the Elf II and Aurora II forums. You just need to flash the Fire compatibility zip on top of it. It uses the 0930 feiyu kernel and should not break touch screens.

rnakpatel

· #4 · Oct 17, 2012

Fantastic.
Rom installed as expected.
It boots and appears to be quite fast actually! (Especially when waking up from sleep!)

Auto-rotate appears to be very buggy and my cameras will not work!

Great work Christian! I'm looking forwards to future builds!

Lamppis

· #5 · Oct 17, 2012

Why did you make this post and not Christian Troy?

novadaemon

Discussion Starter · #6 · Oct 17, 2012

Lamppis said:
Why did you make this post and not Christian Troy?

because he's too busy coding i guess? Also, I already asked if it was a problem, and he said it's ok.

tobyhund

· #7 · Oct 17, 2012

Great job by Chris Troy!!!

See less See more

3

CoOkIe MoNsTeR

· #8 · Oct 17, 2012

Has the popping sound issue been fixed?

justaway2

· #9 · Oct 17, 2012

Is it possible to use this CWM to backup and restore Flambe?

rnakpatel

· #10 · Oct 17, 2012

CoOkIe MoNsTeR said:
Has the popping sound issue been fixed?

So far so good!!

jaciej

· #11 · Oct 17, 2012 (Edited by Moderator)

Well for me it's still popping here and there...

See less See more

miguelsanchez666

· #12 · Oct 17, 2012

justaway2 said:
Is it possible to use this CWM to backup and restore Flambe?

I did nandroid backup Flambe with CWM and will be flashing CM10

DirectX

· #13 · Oct 17, 2012

lets just wait for the stable release...

majestyk

· #14 · Oct 18, 2012

thanks, been waiting for it

nnelgleahcim

· #15 · Oct 18, 2012

Hoping that this rom will be stable a soon as possible, only then that the Fire can be compared side-by-side to high-end tablets. I'm patiently waiting for the developers, thanks in advance to all.

justaway2

· #16 · Oct 18, 2012

Is there any way to change the DPI without breaking the overall UI? On Flambe, you can set it to 213 via the build.prop, but when I set CM10 to 213, most of the system and app UI look excessively large and broken.

pypardo

· #17 · Oct 18, 2012

Hi,
thanks for CM10 works...

I saw in picture that Ethernet menu is not present (under Wifi and Bluetooth) in parameters list.
I plan to use and USB-Ethernet adapter. Is this feature supported under CM10 ?

Regards
pierre

smurfiez

· #18 · Oct 18, 2012

Can't wait for autorotate to work properly, that's my only gripe with this ROM atm. I use the tablet for ebook reading a lot and being stuck in one mode kinda sucks

kimi1983

· #19 · Oct 18, 2012

smurfiez said:
Can't wait for autorotate to work properly, that's my only gripe with this ROM atm. I use the tablet for ebook reading a lot and being stuck in one mode kinda sucks

In RC3 this is fully working.

Problems i have seen so far :

- When i browse by the Help of ES file Explorer to "External_SDCard" it says that the folder is empty, but when i am using the sd card on my windows pc i can see the contents

- My device is getting a lot hotter than on flambee V15

- Camera is still not working

But the ROM is much faster than ever before.

Thx anyway

See less See more

Christian Troy

· #20 · Oct 18, 2012 (Edited by Moderator)

pypardo said:
Hi,
thanks for CM10 works...

I saw in picture that Ethernet menu is not present (under Wifi and Bluetooth) in parameters list.
I plan to use and USB-Ethernet adapter. Is this feature supported under CM10 ?

Regards
pierre

terminal emulator

su
netcfg eth0 up
netcfg eth0 dhcp

@kimi
non proper written app (like es file explorer) that don't fetch paths from environmental variables act like this. If you use "solid explorer" or you point "es file explorer" to /storage/sdcard1 you'll find your microsd

Reactions: 2

1 - 20 of 1111 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.