Android Tablets Forum banner
21 - 40 of 59 Posts

·
Registered
Joined
·
9 Posts
I'll test it as soon it is downloaded. I have an issue with the stock 1.04 rooted, with 1080p decoding >< (mxplayer,moboplayer,etc.... closes after 3seconds)

Go Jellycube! I'll post in its section after flash.

Thanks for the support
Jaunedeuf

EDIT:Gyroscope doesn't work with stock 4.1 JB.... Only with ICS
 

·
Registered
Joined
·
9 Posts
Hi darkrickpr,

I guess I may seek help from your knowledge. I got PiPo M1 MAX here with me and it seems buggy. I got stock M1 MAX firmware and RKbatchtool v.1.5 then I tried to flash. The first flashing failed in the last step and after that my M1 MAX can't reboot again.

When I tried to connect to my PC with USB cable, it shows BLUE box in Rkbatchtool, after after a series of pressing VOLUME & RESET buttons, I can manage to get it to turn GREEN. Now, everytime I tried to flash the tablet again, it keeps failing, showing "Download IDB Fail". I tried with different USB cable, and with different computer (notebook and desktop PC) and none works...

Right now my M1 MAX can't boot up, is there anything I can still do to recover this ? I heard U30GT can be restored with firmware putting in microSD card, I have not found method to do the same....

I also found some other posts about erasing IDB, I don't know if it is relevant to my case. and I don't know how and where to start to erase IDB in this M1 MAX RK3066 device.

-- For U20GT, is it definitely not IPS screen as someone else has said ? And do you think the Android 4.1 firmware is stable ? Any issue, because I want to buy one for my family member. Kindly advise which 4.1 firmware works best right now for U20GT.

Kindly help...
 

·
Registered
Joined
·
1,815 Posts
@ LancelotA

your pipo still can be fix, try installing this complete pipo max m11 package i made for you. This will install clockwork recovery but you will need to download my generick V6 and copy it to a microsd card before flashing this cuz asoon you flash it will reboot to cwm there you need to wipe data/factory reset and format /system(mount and storage)then install my generick v6.zip
Pipo max m11 COMPLETE paCKaGE Boot+KERNEl+CWminstall. On the RKTOOL you will see that there are some file check and the boot and kernel.img are uncheck leave it as is if it doent work then try again check the boot and kernel. remember the tablet must be in flash mode to this work if you have problem you can use the stock rktool to try to get the blue square to get to green then you the other tool i gave you.
 

·
Registered
Joined
·
9 Posts
็Hi darkrickpr,

Thank you very much for your advice. I will try to follow it and hope I can get my M1 MAX back to work again. I have very little knowledge about clockwork recovery, so may I ask you a few questions

1. Quote "try installing this complete pipo max m11 package i made for you. This will install clockwork recovery but you will need to download my generick V6 and copy it to a microsd card before flashing" I'm confused at this point, my PIPO M1 MAX can no longer boot up normally, when I powered on, it won't power on, so how can I install Clockwork recovery in this condition ?

2. Quote "download my generick V6" --- I believe I have to download it from this link ? kindly confirm. Then shall I put zip file or .img file in my microSD card (which I will format to FAT32)
http://www.mediafire.com/?ij98yh4679t4g2z

3. Quote: On the RKTOOL you will see that there are some file check and the boot and kernel.img are uncheck leave it as is if it doent work then try again check the boot and kernel. remember the tablet must be in flash mode to this work if you have problem you can use the stock rktool to try to get the blue square to get to green then you the other tool i gave you. --------- I downloaded your package file from mediafire already, there seems to be a file called "RKAndroidTool.exe" which I never use (sorry, I am quite a novice here, I only used Rkbatchtool v.1.5 only once with this M1 MAX and already my first experience of flashing failed). So, these are the steps I plan to do, and please correct me if I am wrong at any point

i) Run rkbatchtool v.1.5 and connect my M1 MAX, then do as I did before to try to make the BLUE box go GREEN first
ii) Run "RKAndroidTool.exe" that you gave. Do I need to click "Erase NAND (IDB)" first ? because as I informed you earlier, the message I got from rkbatch tool v.1.5 was "DOWNLOAD IDB FAIL"
iii) In RKAndroidTool.exe, I see the option 2,3,6 (parameter, misc, recovery) are checked. And all other parameters are unchecked, so shall I leave them as they are ?
iv) There are tabs NTFS and RAM in this program, all options are unchecked. I shall leave them unchecked, correct ?
v) In the tab FLASH, after I completed step iii) and iv), then I shall just click FLASH ROM ? What is the purpose of REBOOT TO FLASH MODE ? Do I need to take that step too ?

Thanks very much for your great advice.
LancelotA
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #26 ·
To put the pipo max m11 to flash mode is to press and hold the -volume and connect the tablet to pc.then it should be recgoniz as a rk30 device you can also conec power ac once pc detect it to be user have power and not a dischage battery or will fail also and if driver are installed should appear that is connected on the rktool and if you do a erase nand idb you then will need to check the boot and kernel even if you don't erase nand and boot kernel are check won't harm the tablet. As soon tablet reboot you should get to cwm and have already on a microSD my generickv6.zip without extracted leave it on root microsd in .zip wipe data/factory reset then on mount and storage formart/system the install zip as soon it finish click reboot on cwm first menu that should fix it . I will do a video soon if u don't get it right !!


Sent from my HTC Holiday using Tapatalk 2
 

·
Registered
Joined
·
9 Posts

·
Registered
Joined
·
1 Posts
Hey. Im wondering if 4.1 has the same problem that I do on 4.04. When I try to launch a Openvpn connection the tablet reboots.

I really want to fix this but I would like to know if this is fixed in jellybean before I upgrade
 

·
Registered
Joined
·
9 Posts
Hi darkprickr, just coming in to give the feedback. I finally use your tool to erase IDB and flash the .bin firmware that you gave. Then I manage to get the Rocktool BLUE box back into GREEN again. Then tried with several version of stock M1 MAX firmwares and none work. I tried to get into CM recovery once as per your advice, in the end i installed the generic. zip file that I downloaded from your link. The flashing went OK, but it never managed to boot..

Finally, my solution was to use your Android tool to erase IDB, and get into PIPO web site download the latest firmware version (2012-12-17), that is the only stock firmware version that works with my (nearly bricked) tablet... Now, get it to work as normal but I need to keep monitoring it for a while...

Thank you very much for your help. Without you, my tablet would have to go back to China, waiting long months for agent to work with factory to fix it.... I hope to be able to improve my knowledge more and more, quite interested to learn how to make custom ROM too, in fact. But really got not much time....
 

·
Registered
Joined
·
38 Posts
hey

i've installed this rom in my u20gt and i got this:

- excelent battery time;
- excelent antutu score (11800)
- excelent performance at all and excelent wifi reception (more than my nexus S)
- screen rotation works well (after calibration with the tool in rom);

but i have problems to play games like asphalt 7 or modern combat 3. when i open that games, they close.

any sugestion?
 

·
Registered
Joined
·
1,815 Posts
That's strange cuz does games work on mine and wasent before with stock firm.did you format wipe data factory and
/system on cwm?that's the onlything I think could cause the forces close.

Sent from my HTC Holiday using Tapatalk 2
 

·
Registered
Joined
·
2 Posts
can anyone else running cubex or jellycube test the gyro scope?for me i think it is working fine i try a game SEVEN STARS 3D and it works good on Cubex.

@Jaunedeuf you could try me Jellycube it base on the official cube u20gt jellybean but rooted and cleaned build.prop tweaked
-------------------------------------
hi darkrickpr

I try to put yours jellycube in my u20gt and i can't it, my tablet starts in clockworkmod, tray insert the zip file in my sdcard and click in "install zip from sdcard" the rom run me ok, and said me installing from sdcard complete ok. But when reset my tablet goes to the first imatge and not work.

What i do?

PD, Sorry if it's my first time in the forum.

BR.
 

Attachments

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #34 ·
but why do it say update.zip? is that muy jellycube rom?
 

·
Registered
Joined
·
2 Posts
but why do it say update.zip? is that muy jellycube rom?
Hi darkrickpr,

First, I would like to thank you for your work.
After repeating a few times all the steps to install your ROM, I managed to successfully install your ROM
jellycube.

I really thank you very much.

BR DaVodecapo
 

·
Registered
Joined
·
63 Posts
Hello darkrickpr,

What changes did you make to the build prop to gain access to more apps?

I just received my Hyundai Rock X but the more I use it the more I get frustrated as there are a lot of apps I can't install ( Skitch, Maxthon browser, Adidas micoach, lot of games...)

I tried many times to change the build prop so that the tablet would be recognised as a Nexus or a Galaxy Tab but that'd never worked.

Maybe I missing something or doing something wrong so if you could help me it would be great.

Just one thing, my tablet as Jelly Bean 4.1.1, is it the thing that prevent me to spoof Google Play?

Thank you.
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #37 ·
Use my cubex Rom it just made also for the rock x you just need to install finless cwm on you tablet

Sent from my HTC Holiday using Tapatalk 2
 

·
Registered
Joined
·
2 Posts
That's strange cuz does games work on mine and wasent before with stock firm.did you format wipe data factory and
/system on cwm?that's the onlything I think could cause the forces close.

Sent from my HTC Holiday using Tapatalk 2
Hi, @darkrickpr

I´m having the same problems as @alohomora trying to run Asphalt 7 (from APKMania), using a fresh ROM install (wipping data factory and format /system on CWM recovery).

What Asphalt 7 version and from du test in your U20GT?

P.D: Thanks a lot for your excellent work. I plain contribute to support your work even if I finally keep this ROM running...
 

·
Registered
Joined
·
1,815 Posts
Discussion Starter · #39 ·
my cubex rom is still running on my CUBE U20gt and it work perfect i dont have problem with any game strange your having glishes maybe bad download or flashing? did you very sure you format the /system and did wipe ? maybe also could try to redoing all rkandroid tool
 

·
Registered
Joined
·
17 Posts
Hi, @darkrickpr

I am new here and i would like to ask what is the best ROM you made for gaming? Is it truly the CUBEX? Project Margarine? or Generick MOD V7rc1?
 
21 - 40 of 59 Posts
Top