[cadrogui]

I, ive several post about my catastrophic situation, i flash the device and work, but i turn off and never came up, and winxp, doesnt recognize,. i read about JTAG and i think this could be my chance to recover it.anyone can helpme.please!!!!Best Regards

 

[jeep447]

[quote name='cadrogui;6932]I' date=' ive several post about my catastrophic situation, i flash the device and work, but i turn off and never came up, and winxp, doesnt recognize,. i read about JTAG and i think this could be my chance to recover it.anyone can helpme.please!!!!Best Regards[/QUOTE'] I had the exact same thing happen to me...I flashed it with new firmware and it worked great..I put it down and came back around 20 mins later and it was in sleep mode..It wouldn't ever come back on after that!!?? I had a usb keyboard adapter plugged into the host port and the light was still on and I plugged it into the charger and it still charged (at least the red light came on) So I took it off the charger and left the switch on until it was dead (the light from the usb adapter went out) Then I put it on the charger and turned the switch off then on again...I plugged my usb into my computer and it found it again! I just flashed it with a different firmware and now I'm up and running!! Hope this helps ya if you haven't tried again after the battery died!

 

[mattstakilla]

i replied to your other post for help, think it is the fix your looking for

 

[cadrogui]

thanks i fix the issue, just connecting a USB Keyboard to the Device, and try to start up, and works, the device is aliveeeeee!!!!!, jajajajaRegards Mikelpd: GOW Rocks!!!!

 

[mattstakilla]

Gow does rock!

 

[CyberKurt]

Damn.... Mine Apad (moonse batch 2) is totaly DEAD! ???Was trying to update to the new 5.1 and have updated earlyer with no problems, but after the update, which came up with an error, my pad is totaly DEAD!? I've tryed the usb-keyb "trick" with no luck.....Any idea of what to do to bring my apad back to life???Thanks,Pape.