Android Tablets Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Hello folks. I have an intriguing brazilian tablet POSITIVO YPY_ABD10 and was wondering if it is possible to put some custom rom or custom recorevery or any other rom compatible on it and then try to change the rom because it comes in it is terrible.

I try to followed these tutorials here on forum:

http://www.slatedroid.com/topic/40623-aml-flash-tool-aka-imageburntool/

http://www.slatedroid.com/topic/41478-how-to-unbrick-your-amlogic-aml8726-mx-series-tablet-v20/

http://www.slatedroid.com/topic/95977-howto-create-a-rescue-sd-card-for-pretty-much-every-amlogic-8726-mx-device/

and I try too some roms but so far no effective success... I think only worsened the situation somewhat for before he was "soft bricked" and now is "hard bricked" before I could get into recovery mode that came with him by pressing the "power + vol+" and now the sign of life he gives is when I press "power + vol-" and computer recognizes as "M3 CHIP", then I try burn some rom with the flash tool but still no success yet ...

Presentation of it ... ¬ ¬ '


Specs:

Positivo YPY_ABD10
Operating System Android 4.0.4
Model Positivo YPY_AB10D
Processor ARM AMLOGIC @ 1.00 GHz
1 processor
Processor ID ARM implementer 65 architecture 7 variant 2 part 3081 revision 4
L1 Instruction Cache 0 KB
L1 Data Cache 0 KB
L2 Cache 0 KB
L3 Cache 0 KB
Motherboard f03ref_NX
BIOS
Memory 652 MB
-------------------------
CPU
Load Average: 3.00 3.01 3.17 1/664 3934
Processor: ARMv7 Processor rev4(v7L)
BogoMIPS: 655.36
Features: swp half thumb fastmult vfp edsp neon vfpv3
CPU Implementer: 0x41
CPU architecture: 7
CPU variant: 0x2
CPU part: 0xc09
CPU revision: 4

Hardware: AMLOGIC MESON3 8726M SKT SH
Revision: 0020
Serial: 000000000000000c

What are my options? Help me please. :help:
Thank you all. (Sorry my english)
 
1 - 2 of 2 Posts
Top