Android Tablets Forum banner

New firmware 1.9.0 ?

38099 Views 179 Replies 54 Participants Last post by  Labovski
Found I'm version firmware 1.9.0 on page http://umax.cz/download/drivers/MID/M001_1.9.0.rar interesting
See less See more
141 - 160 of 180 Posts
Just tested on Windows 7 Home Premium 32, Windows XP 32, Jolicloud Linux, Ubuntu NBR LiveCD and all pick up both internal and external memory (NAND & SDHC Card).So at a guess its a 64 bit system issue.
Next things to test for me are,Fix the touchscreen issue (Im thinking this is a simple change),Change the wifi TXpower setting from 100 to 20,Some more cleaning up (I only did a rough hack to fix the reboot issue) &Look at how the boot animation thing works (Thinking of a slatedroid logo here).
The touchscreen issue is now fixed, very simple just replaced the code in the 1.9.0 with that from Ecotox 1.3.1Im tracking down all the wifi settings in the code as there are more than one and changing to 20%
10x, Roger, but I just tried on 32-bit XP SP3 bit and I have the same issue. There is nothing in Device Manager, so I guess it's from the device.
Did it work before on a different firmware ?
Yes, as I said, I don't have a card reader and that was my only way to put some data on the SD card. It was working perfect with Slatedroid 1.3. I just tested it on another XP SP3 PC and it's still not working.
had trouble with the touchscreen also, so i connected a mouse so i could select the calibration controls and then calibrated as normal
I will upload a version with the touchscreen fix ASAP.
all you have to do is twist it to portrait...wabam...the touch screen works...
root and swap/market fix work fine without anything special. touch screen is 5 times better than it was (not sure I've had any unintended clicks in a couple hours of use). wifi seems good though I haven't had it unplugged long enough to test the battery life. I think this might be the rom everyone has been waiting for.
jacobius;37035 said:
wambam mine did not respond.
Ive uploaded a revision with the touchscreen problem fixed, check the vestinious rom thread.
[quote name='metal03326;36844]Yes' date=' as I said, I don't have a card reader and that was my only way to put some data on the SD card. It was working perfect with Slatedroid 1.3. I just tested it on another XP SP3 PC and it's still not working.[/QUOTE'] I have the same problem, and also i don?t have a card reader...
See less See more
BTW, Vestinious 1.1.0 which has root is now available to download (see sig below).
[quote name='Roger Calver;37796]BTW' date=' Vestinious 1.1.0 which has root is now available to download (see sig below).[/QUOTE'] Hi Roger, Do you know if your firmware would work on an M002? Thanks, Zach
No as I dont have a M002 but there are not many differences between them.
Roger Calver;37816 said:
No as I dont have a M002 but there are not many differences between them.
I went ahead and installed it on my M002 - everything seems to be fine except for a couple of things which I can sort out.Just one bigish issue - Market seems to be missing, so i grabbed the "Vending.apk" from my M002 Apps Folder and tried to install it but it says it cannot be installed on this device.Any ideas?
Getting Market in will be one of the things on my "to do" list.Market was never in any of the official Eken firmware ROM's and Im guessing thats due to licensing reasons.
Roger Calver;37848 said:
Getting Market in will be one of the things on my "to do" list.Market was never in any of the official Eken firmware ROM's and Im guessing thats due to licensing reasons.
OK It will be great if you can get it to work, as I said, this works perfectly on the M002, but I did have market pre-installed and working on 1.7.4 and now it will not install at all - it just says "Unable to Install on this Device".
where do get the google market apk, as its not in this firmware?..
141 - 160 of 180 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top