Android Tablets Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
58 Posts
since the new flash is empty, it is impossible to flash it following the usual flashing procedure and we have to use "needle"-method when flashing first time after soldering new flash to the board, am i wrong? and of course flash should be of those supported by RK2808 SoC, yes?
 

·
Registered
Joined
·
58 Posts
hucqim80;55999 said:
yes..you have to do the "needle method"..I want to try this but i don't have any nand flash at the moment..
I want too but have to find a pendrive with the compatible flash...
 

·
Registered
Joined
·
29 Posts
can u give me the part number of nand flash?, which it written above the nand flash... e.g: samsung x1xxxx ... if i found it, i'll report back in here....
 
1 - 10 of 10 Posts
Top