Android Tablets Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
Hi I have a strange boot problem with my N101 2 aluminium rear case.
It cannot not be powered on using the on button.
However if I flash the tab with a new firmware, the first startup after the flash it is working normally until I use the on/off button to shutdown it(therefore the on/off button should not be faulty since it respond to the press to off it).
Subsequent pressing of the "on" button could not boot the device.
I tried pressing the reset button under the flap doesnt help.
Any idea what is the problem?
Is it a ROM problem?
 

·
Registered
Joined
·
1 Posts
Hi there!

I have a similar problem with my friends N101 II.
The unit has been working perfect everyday until the battery drained totally one day
after that the unit wont start again?
I have tried everything i found on the web regarding this unit and today i tried flashing a new firmware.
The flashing sequence was working OK all the way down to the IBD then it stopped?
Is there something wrong with the flashmemory in the unit or is there something i have missed?

08:11:45 548 Rockchip Batch Tool v1.5.3.0 start run
08:12:20 007 **********Restore Start Total<1>**********
08:12:20 010 <Layer 2-1-2> Test Device Start
08:12:20 013 <Layer 2-1-2> Test Device Success
08:12:20 015 <Layer 2-1-2> Lowerformat Device Start
08:14:59 114 <Layer 2-1-2> Lowerformat Device Success
08:14:59 116 <Layer 2-1-2> Test Device Start
08:14:59 118 <Layer 2-1-2> Test Device Success
08:14:59 442 <Layer 2-1-2> Check Chip Start
08:14:59 445 <Layer 2-1-2> Check Chip Success
08:14:59 448 <Layer 2-1-2> Get FlashInfo Start
08:14:59 449 <LAYER 2-1-2> INFO:FlashInfo: 0 0 0 1 0 8 10 28 2E 0 F
08:14:59 451 <Layer 2-1-2> Get FlashInfo Success
08:14:59 453 <Layer 2-1-2> Prepare IDB Start
08:14:59 455 <LAYER 2-1-2> INFO:CS(1) (8192MB) (SAMSUNG)
08:14:59 456 <LAYER 2-1-2> INFO:CS(2) (8192MB) (SAMSUNG)
08:14:59 457 <LAYER 2-1-2> INFO:CS(3) (8192MB) (SAMSUNG)
08:14:59 457 <LAYER 2-1-2> INFO:CS(4) (8192MB) (SAMSUNG)
08:14:59 603 <LAYER 2-1-2> INFO:FindBackupBuffer-->No Found Tag
08:14:59 606 <LAYER 2-1-2> INFO:FindBackupBuffer-->No Found Tag
08:14:59 609 <LAYER 2-1-2> INFO:FindBackupBuffer-->No Found Tag
08:14:59 612 <LAYER 2-1-2> INFO:FindBackupBuffer-->No Found Tag
08:14:59 615 <LAYER 2-1-2> INFO:FindBackupBuffer-->No Found Tag
08:14:59 616 <LAYER 2-1-2> ERROR:prepareIDB-->Loader-->No Found IDB
08:14:59 618 <Layer 2-1-2> Prepare IDB Fail
08:14:59 621 **********Restore Done Success<0> Fail<1> Time<159620>ms**********

I hope that someone understand what the problem is and have a solution


Wkr/Roger
 
1 - 2 of 2 Posts
Top