Android Tablets Forum banner
1 - 9 of 9 Posts

·
Premium Member
Joined
·
362 Posts
This was posted in an other thread regarding the same problem. Maybe it is helpful to you too. //L.
enotar;19099 said:
Success coming back to begining:As there is no 1.72 ROM arround I decide to use the 1.7.4 post here http://www.slatedroid.com/f90/m7000...ID-M70003-original-firmware...-obtained/page2Post 12 and use the Dump.rar /system post here:http://www.l8ter.com/slatedroid/M7003_Sys_dump.tarI system folder and re-flash and BINGOThe booting says it is 1.7.4 but that should be 1.7.2And i get now the Demo Purpose only! not the Uggly Demo version has expiredThe Eken is now usableIt would be great if we can find the exact file that do the trick to avoid the bad message and get a complete 1.7.4 that is a lot better.Only hip for now I cannot connect with WIFI Tablet recognise the WIFI with WEP but dont connect!
 

·
Registered
Joined
·
92 Posts
Mongol;57476 said:
and!?.....
You may try to re-flash to 1.9 firmware. I have an EPAD/Flytouch which having the stupid message "Demo Purpose Only" and I able to solve it by upgrading to 1.9 firmware. Hope this info is helpful.
 

·
Premium Member
Joined
·
362 Posts
timmy;57502 said:
You may try to re-flash to 1.9 firmware. I have an EPAD/Flytouch which having the stupid message "Demo Purpose Only" and I able to solve it by upgrading to 1.9 firmware. Hope this info is helpful.
That is not very good advice. Since Mongol has an M70003 he risks loosing functions in his tablet or even bricking it by using a firmware that is made for another machine.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top