Android Tablets Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #2 ·
any idea?
He added drivers sources.
I modified the kconfig; each folder where I put the new fonts.
When compiling nothing is created, not zImage or kernel.img
Help!

[email protected]:~$ export ARCH=arm
[email protected]:~$ export CROSS COMPILE=arm-eabi-
[email protected]:~$ export PATH=/home/francisco/android-ndk-r4/build/prebuilt/linux-x86/arm-eabi-4.4.0/bin/:$PATH
[email protected]:~$ cd '/home/francisco/android_kernel_rockchip_rk2918-3.0.8-'
[email protected]:~/android_kernel_rockchip_rk2918-3.0.8-$ make RK29SDK_defconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/lex.zconf.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
#
# configuration written to .config
#
[email protected]:~/android_kernel_rockchip_rk2918-3.0.8-$ make -j2 kernel.img
scripts/kconfig/conf --silentoldconfig Kconfig
*
* Restart config...
*
*
* Touchscreens
*
Touchscreens (INPUT_TOUCHSCREEN) [Y/n/?] y
ili2102 based touchscreens: IIC Interface (TOUCHSCREEN_ILI2102_IIC) [N/m/y/?] n
Goodix touch screen gt8xx support for rk29 (TOUCHSCREEN_GT8XX) [Y/n/m/?] y
IT7250 based touchscreens: IT7250 Interface (TOUCHSCREEN_IT7250) [N/m/y/?] n
Analog Devices AD7879-1/AD7889-1 touchscreen interface (TOUCHSCREEN_AD7879) [N/m/y/?] n
Atmel mXT I2C Touchscreen (TOUCHSCREEN_ATMEL_MXT) [N/m/y/?] n
BU21013 based touch panel controllers (TOUCHSCREEN_BU21013) [N/m/y/?] n
Touchplus serial touchscreen (TOUCHSCREEN_TOUCHPLUS) [N/m/y/?] n
cy8ctmg110 touchscreen (TOUCHSCREEN_CY8CTMG110) [N/m/y/?] n
Dynapro serial touchscreen (TOUCHSCREEN_DYNAPRO) [N/m/y/?] n
Hampshire serial touchscreen (TOUCHSCREEN_HAMPSHIRE) [N/m/y/?] n
EETI touchscreen panel support (TOUCHSCREEN_EETI) [N/m/y/?] n
Fujitsu serial touchscreen (TOUCHSCREEN_FUJITSU) [N/m/y/?] n
Gunze AHL-51S touchscreen (TOUCHSCREEN_GUNZE) [N/m/y/?] n
Elo serial touchscreens (TOUCHSCREEN_ELO) [N/m/y/?] n
Wacom W8001 penabled serial touchscreen (TOUCHSCREEN_WACOM_W8001) [N/m/y/?] n
MAX11801 based touchscreens (TOUCHSCREEN_MAX11801) [N/m/y/?] n
MELFAS MCS-5000 touchscreen (TOUCHSCREEN_MCS5000) [N/m/y/?] n
MicroTouch serial touchscreens (TOUCHSCREEN_MTOUCH) [N/m/y/?] n
iNexio serial touchscreens (TOUCHSCREEN_INEXIO) [N/m/y/?] n
ICS MicroClock MK712 touchscreen (TOUCHSCREEN_MK712) [N/m/y/?] n
Penmount serial touchscreen (TOUCHSCREEN_PENMOUNT) [N/m/y/?] n
Synaptics i2c touchscreen (TOUCHSCREEN_SYNAPTICS_I2C_RMI) [N/m/y/?] n
Touchright serial touchscreen (TOUCHSCREEN_TOUCHRIGHT) [N/m/y/?] n
Touchwin serial touchscreen (TOUCHSCREEN_TOUCHWIN) [N/m/y/?] n
USB Touchscreen Driver (TOUCHSCREEN_USB_COMPOSITE) [N/m/y/?] n
Sahara TouchIT-213 touchscreen (TOUCHSCREEN_TOUCHIT213) [N/m/y/?] n
TSC2007 based touchscreens (TOUCHSCREEN_TSC2007) [N/m/y/?] n
W90P910 touchscreen driver (TOUCHSCREEN_W90X900) [N/m/y/?] n
Sitronix ST1232 touchscreen controllers (TOUCHSCREEN_ST1232) [N/m/y/?] n
TPS6507x based touchscreens (TOUCHSCREEN_TPS6507X) [N/m/y/?] n
Hannstar P1003 touchscreen (HANNSTAR_P1003) [N/m/y/?] n
Atmel mXT224 touchscreen (ATMEL_MXT224) [N/m/y/?] n
Sintek 3FA16 touchscreen (SINTEK_3FA16) [N/m/y/?] n
EETI_EGALAX touchscreen panel support (EETI_EGALAX) [N/m/y/?] n
IT7260 based touchscreens: IT7260 Interface (TOUCHSCREEN_IT7260) [N/m/y/?] n
IT7260 based touchscreens: IT7260 I2C Interface (TOUCHSCREEN_IT7260_I2C) [N/m/y/?] n
NAS based touchscreens: NAS Interface (TOUCHSCREEN_NAS) [N/m/y/?] n
LAIBAO touchscreen (LAIBAO_TS) [N/m/y/?] n
GT801_IIC based touchscreens (TOUCHSCREEN_GT801_IIC) [Y/n/m] y
GT811_IIC based touchscreens (TOUCHSCREEN_GT811_IIC) [N/m/y] (NEW) y
GT818_IIC based touchscreens (TOUCHSCREEN_GT818_IIC) [N/m/y] n
PIXCIR_IIC based touchscreens (TOUCHSCREEN_PIXCIR) [N/m/y] n
D70-L3188A based touchscreens (D70_L3188A) [N/m/y] n
GT819 based touchscreens (TOUCHSCREEN_GT819) [N/m/y] n
bu21020 TOUCHSCREEN (TOUCHSCREEN_BU21020) [N/y] n
FT5306 based touchscreens: FT5306 Interface (TOUCHSCREEN_FT5306) [N/m/y] n
FT5406 based touchscreens: FT5406 Interface (TOUCHSCREEN_FT5406) [N/m/y/?] n
FT5606 based touchscreens: FT5606 Interface (TOUCHSCREEN_FT5606) [N/m/y/?] n
st1564 based touchscreens: st1564 Interface (TOUCHSCREEN_ST1564) [N/m/y/?] n
A080SN03 TOUCHSCREEN (TOUCHSCREEN_A080SN03) [N/y] n
ATMEL_MXT1386 touchscreen panel support (ATMEL_MXT1386) [N/m/y/?] n
touchscreens size select (TOUCHSCREEN_SIZE) [Y/n/m] y
1024X768 resolution (TOUCHSCREEN_1024X768) [N/m/y] n
1024X600 resolution (TOUCHSCREEN_1024X600) [N/m/y] n
800X600 resolution (TOUCHSCREEN_800X600) [N/m/y] n
800X480 resolution (TOUCHSCREEN_800X480) [Y/n/m] y
screen display direction (SCREEN_DISPLAY) [Y/n/m] y
LANDSCAPE DISPLAY (LANDSCAPE_DISPLAY) [N/m/y] n
PORTRAIT DISPLAY (PORTRAIT_DISPLAY) [Y/n/m] y
*
* HDMI
*
HDMI support (HDMI) [Y/n] y
HDMI chips select
> 1. anx7150 (ANX7150)
2. anx9030 (ANX9030)
3. cat6611 (CAT6611) (NEW)
choice[1-3]: 3
enable hdmi save data (HDMI_SAVE_DATA) [N/y/?] n
#
# configuration written to .config
#
CHK include/linux/version.h
CHK include/generated/utsrelease.h
HOSTCC scripts/kallsyms
CC scripts/mod/empty.o
HOSTCC scripts/mod/mk_elfconfig
MKELF scripts/mod/elfconfig.h
HOSTCC scripts/mod/file2alias.o
HOSTCC scripts/pnmtologo
scripts/pnmtologo.c: En la función 'write_footer':
scripts/pnmtologo.c:280:3: aviso: formato '%ld' espera un argumento de tipo 'long int', pero el argumento 4 es de tipo 'unsigned int' [-Wformat]
scripts/pnmtologo.c:281:3: aviso: formato '%ld' espera un argumento de tipo 'long int', pero el argumento 4 es de tipo 'unsigned int' [-Wformat]
HOSTCC scripts/conmakehash
HOSTCC scripts/mod/modpost.o
HOSTCC scripts/mod/sumversion.o
HOSTLD scripts/mod/modpost
make[1]: «include/generated/mach-types.h» está actualizado.
CC kernel/bounds.s
GEN include/generated/bounds.h
CC arch/arm/kernel/asm-offsets.s
GEN include/generated/asm-offsets.h
CALL scripts/checksyscalls.sh
CC init/main.o
HOSTCC usr/gen_init_cpio
GEN usr/initramfs_data.cpio
AS usr/initramfs_data.o
LD usr/built-in.o
CC arch/arm/vfp/vfpmodule.o
CHK include/generated/compile.h
AS arch/arm/vfp/entry.o
UPD include/generated/compile.h
AS arch/arm/vfp/vfphw.o
CC init/do_mounts.o
CC arch/arm/vfp/vfpsingle.o
CC arch/arm/vfp/vfpdouble.o
CC init/do_mounts_initrd.o
CC init/initramfs.o
LD arch/arm/vfp/vfp.o
LD arch/arm/vfp/built-in.o
CC arch/arm/kernel/elf.o
CC init/calibrate.o
CC init/version.o
AS arch/arm/kernel/entry-armv.o
AS arch/arm/kernel/entry-common.o
CC arch/arm/kernel/irq.o
LD init/mounts.o
LD init/built-in.o
CC arch/arm/mm/dma-mapping.o
CC arch/arm/kernel/process.o
CC arch/arm/mm/extable.o
CC arch/arm/kernel/ptrace.o
CC arch/arm/mm/fault.o
CC arch/arm/mm/init.o
CC arch/arm/kernel/return_address.o
arch/arm/kernel/return_address.c:62:2: warning: #warning "TODO: return_address should use unwind tables"
CC arch/arm/kernel/setup.o
arch/arm/mm/init.c: In function 'mem_init':
arch/arm/mm/init.c:675: warning: format '%08lx' expects type 'long unsigned int', but argument 12 has type 'unsigned int'
CC arch/arm/mm/iomap.o
CC arch/arm/kernel/signal.o
CC arch/arm/mm/fault-armv.o
CC arch/arm/mm/flush.o
CC arch/arm/kernel/sys_arm.o
CC arch/arm/mm/idmap.o
CC arch/arm/kernel/stacktrace.o
CC arch/arm/mm/ioremap.o
CC arch/arm/kernel/time.o
CC arch/arm/mm/mmap.o
CC arch/arm/kernel/traps.o
CC arch/arm/mm/pgd.o
CC arch/arm/kernel/armksyms.o
CC arch/arm/mm/mmu.o
CC arch/arm/kernel/module.o
AS arch/arm/kernel/sleep.o
CC arch/arm/kernel/sched_clock.o
CC arch/arm/mm/vmregion.o
CC arch/arm/kernel/thumbee.o
CC arch/arm/mm/proc-syms.o
CC arch/arm/kernel/unwind.o
CC arch/arm/mm/alignment.o
CC arch/arm/kernel/pmu.o
CC arch/arm/kernel/io.o
CC arch/arm/mm/highmem.o
AS arch/arm/kernel/head.o
CC arch/arm/kernel/init_task.o
AS arch/arm/mm/abort-ev7.o
LDS arch/arm/kernel/vmlinux.lds
LD arch/arm/kernel/built-in.o
AS arch/arm/mm/pabort-v7.o
AS arch/arm/mm/cache-v7.o
CC arch/arm/mm/copypage-v6.o
CC arch/arm/common/gic.o
CC arch/arm/common/pl330.o
CC arch/arm/mm/context.o
AS arch/arm/mm/tlb-v7.o
AS arch/arm/mm/proc-v7.o
LD arch/arm/mm/built-in.o
CC arch/arm/mach-rk29/timer.o
CC arch/arm/mach-rk29/io.o
CC arch/arm/mach-rk29/devices.o
In file included from arch/arm/mach-rk29/devices.c:28:
arch/arm/mach-rk29/include/mach/rk29_camera.h:233: warning: 'struct i2c_client' declared inside parameter list
arch/arm/mach-rk29/include/mach/rk29_camera.h:233: warning: its scope is only this definition or declaration, which is probably not what you want
arch/arm/mach-rk29/include/mach/rk29_camera.h:234: warning: 'struct i2c_client' declared inside parameter list
arch/arm/mach-rk29/include/mach/rk29_camera.h:235: warning: 'struct i2c_client' declared inside parameter list
arch/arm/mach-rk29/include/mach/rk29_camera.h:236: warning: 'struct i2c_client' declared inside parameter list
arch/arm/mach-rk29/include/mach/rk29_camera.h:237: warning: 'struct i2c_client' declared inside parameter list
arch/arm/mach-rk29/include/mach/rk29_camera.h:237: warning: 'struct soc_camera_device' declared inside parameter list
CC arch/arm/mach-rk29/iomux.o
LD arch/arm/common/built-in.o
DECODE arch/arm/mach-rk29/clock.o
/bin/sh: uudecode: orden no encontrada
make[1]: *** [arch/arm/mach-rk29/clock.o] Error 127
make[1]: *** Se espera a que terminen otras tareas....
CC kernel/sched.o
make: *** [arch/arm/mach-rk29] Error 2
make: *** Se espera a que terminen otras tareas....
CC kernel/fork.o
CC kernel/exec_domain.o
CC kernel/panic.o
CC kernel/printk.o
CC kernel/cpu.o
CC kernel/exit.o
CC kernel/itimer.o
TIMEC kernel/timeconst.h
CC kernel/softirq.o
CC kernel/resource.o
CC kernel/sysctl.o
CC kernel/sysctl_binary.o
CC kernel/capability.o
CC kernel/ptrace.o
CC kernel/timer.o
CC kernel/user.o
CC kernel/signal.o
CC kernel/sys.o
CC kernel/kmod.o
CC kernel/workqueue.o
CC kernel/pid.o
CC kernel/rcupdate.o
CC kernel/extable.o
CC kernel/params.o
CC kernel/posix-timers.o
CC kernel/kthread.o
CC kernel/wait.o
CC kernel/kfifo.o
CC kernel/sys_ni.o
CC kernel/posix-cpu-timers.o
CC kernel/mutex.o
CC kernel/hrtimer.o
CC kernel/rwsem.o
CC kernel/nsproxy.o
CC kernel/srcu.o
CC kernel/semaphore.o
CC kernel/notifier.o
CC kernel/ksysfs.o
CC kernel/pm_qos_params.o
CC kernel/sched_clock.o
CC kernel/cred.o
CC kernel/async.o
CC kernel/range.o
CC kernel/jump_label.o
CC kernel/groups.o
CC kernel/freezer.o
CC kernel/stacktrace.o
CC kernel/irq/irqdesc.o
CC kernel/power/main.o
CC kernel/irq/handle.o
CC kernel/power/console.o
CC kernel/irq/manage.o
CC kernel/power/process.o
CC kernel/irq/spurious.o
CC kernel/power/suspend.o
CC kernel/irq/resend.o
CC kernel/power/wakelock.o
CC kernel/irq/chip.o
CC kernel/irq/dummychip.o
CC kernel/irq/devres.o
CC kernel/power/userwakelock.o
CC kernel/irq/autoprobe.o
CC kernel/power/earlysuspend.o
CC kernel/irq/proc.o
CC kernel/irq/pm.o
CC kernel/power/fbearlysuspend.o
LD kernel/irq/built-in.o
CC kernel/time/timekeeping.o
CC kernel/power/poweroff.o
LD kernel/power/built-in.o
CC kernel/time/ntp.o
CC kernel/time/clocksource.o
CC kernel/time/jiffies.o
CC kernel/time/timer_list.o
CC kernel/time/timecompare.o
CC kernel/time/timeconv.o
CC kernel/futex.o
CC kernel/time/posix-clock.o
CC kernel/time/clockevents.o
CC kernel/time/tick-common.o
CC kernel/time/tick-oneshot.o
CC kernel/time/tick-sched.o
CC kernel/time/timer_stats.o
CC kernel/rtmutex.o
LD kernel/time/built-in.o
CC kernel/up.o
CC kernel/uid16.o
CC kernel/module.o
CC kernel/kallsyms.o
CC kernel/cgroup.o
CC kernel/cgroup_freezer.o
CC kernel/res_counter.o
CC kernel/hung_task.o
CC kernel/rcutree.o
CC kernel/utsname_sysctl.o
CC kernel/elfcore.o
CC kernel/time.o
LD kernel/built-in.o
[email protected]:~/android_kernel_rockchip_rk2918-3.0.8-$
 

·
Registered
Joined
·
5 Posts
hello pancho, I'm trying to do the same thing as you but I'm facing similar problems. I can't go through the second boot screen, but my touch seems to work, cause the tablet buttons get their light up.

which tablet are you using?
could you paste your .config file?

Since now I've tried this kernels

AN7BG3_AN7FG3_AN8G3_AN8CG3_GPL_release
kepler2
android-kernel-mediacom-mp810c
rockchip-kernel-rk2918
xteam31
Smartpad-810c-Kernel-3.0.8

Smartpad is my hope to work. I'm working in on it to make my tablet work.

I've a Nextbook
 

·
Registered
Joined
·
5 Posts
hello pancho, I'm trying to do the same thing as you but I'm facing similar problems. I can't go through the second boot screen, but my touch seems to work, cause the tablet buttons get their light up.

which tablet are you using?
could you paste your .config file?

Since now I've tried this kernels

AN7BG3_AN7FG3_AN8G3_AN8CG3_GPL_release
kepler2
android-kernel-mediacom-mp810c
rockchip-kernel-rk2918
xteam31
Smartpad-810c-Kernel-3.0.8

Smartpad is my hope to work. I'm working in on it to make my tablet work.

I've a Nextbook
I can not attach files. I have a few posts.
I'm using the configuration M712HC_defconfig.https://github.com/toiiki/android_kernel_rockchip_pascal2
I've added the drivers that are different on my tablet.https://github.com/panchomatasano/android_kernel_rockchip_pascal2

My tablet is TITAN 7010b. And this is my shell dmesg

[email protected]:/ $ su
[email protected]:/ # export PATH=/data/local/bin:$PATH
[email protected]:/ # dmesg
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.8+ ([email protected]) (gcc version 4.4.0 (GCC) ) #109 PREEMPT Wed Jul 11 16:39:06 CST 2012
<4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: RK29board
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<4>[ 0.000000] Boot mode: 6
<6>[ 0.000000] bootconsole [earlycon0] enabled
<4>[ 0.000000] CPU SRAM: copied sram code from c0b33000 to fef00000 - fef01b68
<4>[ 0.000000] CPU SRAM: copied sram data from c0b34b68 to fef03000 - fef031d0
<6>[ 0.000000] Clocking rate (apll/dpll/cpll/gpll/core/aclk_cpu/hclk_cpu/pclk_cpu/aclk_periph/hclk_periph/pclk_periph): 300/135/297/288/300/150/75/37/144/144/36 MHz (20110909)
<4>[ 0.000000] DDR DEBUG: version 2.02 20120401, zqonoff
<4>[ 0.000000] DDR DEBUG: DDR3 Device
<4>[ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
<4>[ 0.000000] DDR DEBUG: init success!!! freq=426MHz
<4>[ 0.000000] DDR DEBUG: CSR:0x0, RSLR0:0x249, RSLR1:0x0, RDGR0:0x55, RDGR1:0x55
<7>[ 0.000000] On node 0 totalpages: 207104
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0b31cf0, node_mem_map c15bc000
<7>[ 0.000000] DMA zone: 594 pages used for memmap
<7>[ 0.000000] DMA zone: 0 pages reserved
<7>[ 0.000000] DMA zone: 75438 pages, LIFO batch:15
<7>[ 0.000000] HighMem zone: 1454 pages used for memmap
<7>[ 0.000000] HighMem zone: 129618 pages, LIFO batch:31
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 205056
<5>[ 0.000000] Kernel command line: console=ttyS1,115200n8n androidboot.console=ttyS1 init=/init initrd=0x62000000,0x110000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](system),[email protected](user) bootver=2012-05-11#2.26 firmware_ver=0.2.3
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 297MB 512MB = 809MB total
<5>[ 0.000000] Memory: 802216k/802216k available, 26200k reserved, 524288K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff600000 - 0xffe00000 ( 8 MB)
<5>[ 0.000000] vmalloc : 0xd3000000 - 0xfe800000 ( 696 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xd2900000 ( 297 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0408000 - 0xc0527000 (1148 kB)
<5>[ 0.000000] .text : 0xc0527000 - 0xc0ad0fa0 (5800 kB)
<5>[ 0.000000] .data : 0xc0ad2000 - 0xc0b329c0 ( 387 kB)
<5>[ 0.000000] .bss : 0xc0b35024 - 0xc15bb470 (10778 kB)
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:388
<4>[ 0.000000] rk29_gpio_init: 224 gpio irqs in 7 banks
<6>[ 0.000000] sched_clock: 32 bits at 36MHz, resolution 27ns, wraps every 119304ms
<6>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.005476] Calibrating delay loop (skipped) preset value.. 299.83 BogoMIPS (lpj=1499184)
<6>[ 0.014611] pid_max: default: 32768 minimum: 301
<6>[ 0.020104] Mount-cache hash table entries: 512
<6>[ 0.025876] Initializing cgroup subsys debug
<6>[ 0.030680] Initializing cgroup subsys cpuacct
<6>[ 0.035734] Initializing cgroup subsys freezer
<6>[ 0.040772] CPU: Testing write buffer coherency: ok
<6>[ 0.047328] devtmpfs: initialized
<6>[ 0.060867] print_constraints: dummy:
<6>[ 0.065471] NET: Registered protocol family 16
<4>[ 0.070547] last_log: 0xd2480000 0xc0b36328
<6>[ 0.081309] SENSOR_CONFIG tool_config_devices : back(mt9d112-3c), front(gc0307-21), onoff(1), close(0)
<6>[ 0.194981] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[ 0.239701] bio: create slab <bio-0> at 0
<5>[ 0.245674] SCSI subsystem initialized
<6>[ 0.250386] usbcore: registered new interface driver usbfs
<6>[ 0.256781] usbcore: registered new interface driver hub
<6>[ 0.262951] usbcore: registered new device driver usb
<3>[ 0.269481] i2c i2c-0: 1 i2c clients have been registered at 0x4c
<3>[ 0.276218] i2c i2c-0: 1 i2c clients have been registered at 0x1c
<6>[ 0.283334] rk29_i2c rk29_i2c.0: i2c-0: RK29 I2C adapter
<6>[ 0.289932] rk29_i2c rk29_i2c.1: i2c-1: RK29 I2C adapter
<6>[ 0.296504] rk29_i2c rk29_i2c.2: i2c-2: RK29 I2C adapter
<6>[ 0.302754] rk29_i2c rk29_i2c.3: i2c-3: RK29 I2C adapter
<6>[ 0.308996] rk29-adc rk29-adc: rk29 adc: driver initialized
<6>[ 0.315765] Advanced Linux Sound Architecture Driver Version 1.0.24.
<4>[ 0.323869] rk29_tps65910_config: tps65910 init config.
<6>[ 0.332282] TPS65910 Set default voltage.
<6>[ 0.339041] Switching to clocksource timer3
<4>[ 0.344251] RK29 Backlight Driver Initialized.
<6>[ 0.351803] Switched to NOHz mode on CPU #0
<6>[ 0.369029] NET: Registered protocol family 2
<6>[ 0.374267] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.382899] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
<6>[ 0.393690] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.402639] TCP: Hash tables configured (established 65536 bind 65536)
<6>[ 0.409948] TCP reno registered
<6>[ 0.413512] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.420085] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.427801] NET: Registered protocol family 1
<3>[ 0.461911] fail to get regulator tps65910_vaux2: -19
<4>[ 0.504648] rk29_backlight_set: set 1
<4>[ 0.663879] rk29fb_probe ok
<6>[ 0.667687] Unpacking initramfs...
<6>[ 0.812501] Freeing initrd memory: 1088K
<6>[ 0.818022] print_constraints: VIO: 3300 mV normal
<6>[ 0.824741] print_constraints: VDD1: 950 <--> 1400 mV at 1275 mV normal
<6>[ 0.833080] print_constraints: VDD2: 1500 mV normal
<6>[ 0.838987] print_constraints: VDIG1: 2700 mV normal
<6>[ 0.845904] print_constraints: VDIG2: 1200 mV normal
<6>[ 0.851883] print_constraints: VAUX33: 3300 mV normal
<6>[ 0.857996] print_constraints: VMMC: 3000 mV normal
<6>[ 0.863916] print_constraints: VAUX1: 2800 mV normal
<6>[ 0.869898] print_constraints: VAUX2: 2900 mV normal
<6>[ 0.875928] print_constraints: VDAC: 1800 mV normal
<6>[ 0.882341] print_constraints: VPLL: 2500 mV normal
<6>[ 0.888219] PMU: registered new PMU device of type 0
<6>[ 0.894271] Loaded driver for PL330 DMAC-0 rk29-pl330
<6>[ 0.899942] DBUFF-32x8bytes Num_Chans-6 Num_Peri-8 Num_Events-3
<6>[ 0.906930] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[ 0.912589] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-4
<4>[ 0.924209] vpu_mem: 63 initialized
<4>[ 0.928266] vpu: power on
<6>[ 0.951710] VPU_SERVICE: HW ID = 0x67311148
<6>[ 0.956410] VPU_SERVICE: Compatible HW found at 0x10104200
<6>[ 0.962526] VPU_SERVICE: HW ID = 0x82701110
<6>[ 0.967553] VPU_SERVICE: Compatible HW found at 0x10104000
<4>[ 0.973931] vpu: power off...done
<6>[ 0.997707] VPU_SERVICE: init success
<4>[ 1.001861] ret=0x0
<4>[ 1.021442] highmem bounce pool size: 64 pages
<6>[ 1.026702] ashmem: initialized
<6>[ 1.030753] fuse init (API version 7.16)
<6>[ 1.036165] io scheduler noop registered
<6>[ 1.040593] io scheduler cfq registered (default)
<4>[ 1.048677] CAT6611: Reg[0-3] = 0x[00].[ca].[11].[16]
<6>[ 1.070910] cat6611 1-004d: cat6611 i2c probe ok
<6>[ 1.076457] rk29_serial.1: ttyS1 at MMIO 0x20060000 (irq = 67) is a rk29_serial.1
<6>[ 1.085198] rk29_serial rk29_serial.1: baud:115200
<4>[ 1.090560] serial.1 timeout:1000000
<6>[ 1.094636] console [ttyS1] enabled, bootconsole disabled
<6>[ 1.123829] rk29_serial rk29_serial.1: membase 0xd3016000
<6>[ 1.129264] rk29_serial.0: ttyS0 at MMIO 0x20030000 (irq = 66) is a rk29_serial.0
<6>[ 1.153838] rk29_serial rk29_serial.0: membase 0xd301e000
<6>[ 1.159309] rk29_serial.2: ttyS2 at MMIO 0x20064000 (irq = 68) is a rk29_serial.2
<6>[ 1.183840] rk29_serial rk29_serial.2: membase 0xd3026000
<6>[ 1.193592] loop: module loaded
<6>[ 1.196865] pmem_cam: 1 init
<6>[ 1.200750] pmem: 1 init
<6>[ 1.205057] Android kernel panic handler initialized (bind=kpanic)
<6>[ 1.211702] PPP generic driver version 2.4.2
<6>[ 1.216143] PPP Deflate Compression module registered
<6>[ 1.221195] PPP BSD Compression module registered
<6>[ 1.226862] PPP MPPE Compression module registered
<6>[ 1.231653] NET: Registered protocol family 24
<6>[ 1.236224] usbcore: registered new interface driver asix
<6>[ 1.241656] usbcore: registered new interface driver cdc_ether
<6>[ 1.247566] usbcore: registered new interface driver dm9620
<6>[ 1.253172] usbcore: registered new interface driver SR9700_android
<6>[ 1.259492] usbcore: registered new interface driver net1080
<6>[ 1.265202] usbcore: registered new interface driver cdc_subset
<6>[ 1.271155] usbcore: registered new interface driver zaurus
<6>[ 1.276751] cdc_ncm: 04-Aug-2011
<6>[ 1.280016] usbcore: registered new interface driver cdc_ncm
<4>[ 1.285685] Rockchip WiFi SYS interface (V1.00) ...
<6>[ 1.290675] Initializing USB Mass Storage driver...
<6>[ 1.295616] usbcore: registered new interface driver usb-storage
<6>[ 1.301617] USB Mass Storage support registered.
<6>[ 1.306362] usbcore: registered new interface driver usbserial
<6>[ 1.312224] USB Serial support registered for generic
<6>[ 1.317335] usbcore: registered new interface driver usbserial_generic
<6>[ 1.323873] usbserial: USB Serial Driver core
<6>[ 1.328261] USB Serial support registered for GSM modem (1-port)
<6>[ 1.334324] usbcore: registered new interface driver option
<6>[ 1.339893] option: v0.7.2:USB Driver for GSM modems
<6>[ 1.344975] DWC_OTG: dwc_otg_driver_probe otg2.0 reg addr: 0x10180000 remap:0xd3080000
<6>[ 1.563217] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[ 1.567972] usb20_otg usb20_otg: DWC OTG Controller
<6>[ 1.572868] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[ 1.580123] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[ 1.585620] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[ 1.592382] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.599182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.606413] usb usb1: Product: DWC OTG Controller
<6>[ 1.611115] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
<6>[ 1.616781] usb usb1: SerialNumber: usb20_otg
<6>[ 1.621535] hub 1-0:1.0: USB hub found
<6>[ 1.625321] hub 1-0:1.0: 1 port detected
<6>[ 1.629650] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xd3100000
<6>[ 1.847957] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 1.852581] usb20_host usb20_host: DWC OTG Controller
<6>[ 1.857660] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[ 1.865085] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[ 1.870752] DWC_OTG: Init: Port Power? op_state=1
<6>[ 1.875450] DWC_OTG: Init: Power Port (0)
<6>[ 1.879518] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 1.886318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 1.893535] usb usb2: Product: DWC OTG Controller
<6>[ 1.898249] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
<6>[ 1.903830] usb usb2: SerialNumber: usb20_host
<6>[ 1.908623] hub 2-0:1.0: USB hub found
<6>[ 1.912384] hub 2-0:1.0: 1 port detected
<6>[ 1.916648] DWC_OTG: host11_driver_probe host1.1 reg addr: 0x10140000 remap:0xd3180000
<6>[ 2.135028] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 2.139652] usb11_host usb11_host: DWC OTG Controller
<6>[ 2.144732] usb11_host usb11_host: new USB bus registered, assigned bus number 3
<6>[ 2.152144] usb11_host usb11_host: irq 50, io mem 0x00000000
<6>[ 2.157828] DWC_OTG: Init: Port Power? op_state=1
<6>[ 2.162527] DWC_OTG: Init: Power Port (0)
<6>[ 2.166584] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 2.173368] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 2.180598] usb usb3: Product: DWC OTG Controller
<6>[ 2.185313] usb usb3: Manufacturer: Linux 3.0.8+ host11_hcd
<6>[ 2.190882] usb usb3: SerialNumber: usb11_host
<6>[ 2.195662] hub 3-0:1.0: USB hub found
<6>[ 2.199420] hub 3-0:1.0: 1 port detected
<6>[ 2.204610] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 2.211484] android_usb gadget: Number of LUNs=2
<6>[ 2.216136] lun0: LUN: removable file: (no medium)
<6>[ 2.221013] lun1: LUN: removable file: (no medium)
<6>[ 2.226060] android_usb gadget: android_usb ready
<6>[ 2.231011] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<6>[ 2.238341] usbcore: registered new interface driver xpad
<6>[ 2.243811] usbcore: registered new interface driver usb_acecad
<6>[ 2.249727] acecad: v3.2:USB Acecad Flair tablet driver
<6>[ 2.255012] usbcore: registered new interface driver aiptek
<6>[ 2.260579] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[ 2.268503] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[ 2.275945] usbcore: registered new interface driver gtco
<4>[ 2.281338] GTCO usb driver version: 2.00.0006
<6>[ 2.285669] usbcore: registered new interface driver hanwang
<6>[ 2.291548] usbcore: registered new interface driver kbtab
<6>[ 2.297084] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[ 2.302885] usbcore: registered new interface driver wacom
<6>[ 2.308380] wacom: v1.52:USB Wacom tablet driver
<6>[ 2.313528] mc3230: invalid devid
<4>[ 2.316860] mc3230_probe error
<4>[ 2.319925] gs_mc3230: probe of 0-004c-1 failed with error -1
<4>[ 2.326544] mma7660_probe mma7660 detect ok!
<6>[ 2.330995] input: gsensor as /devices/platform/rk29_i2c.0/i2c-0/0-004c/input/input1
<4>[ 2.338992] i2c-core: driver [gs_mma7660] using legacy suspend method
<4>[ 2.345457] i2c-core: driver [gs_mma7660] using legacy resume method
<6>[ 2.351916] rk29_i2c rk29_i2c.0: addr: 0x1c receive no ack
<3>[ 2.357490] rk29_i2c rk29_i2c.0: i2c transfer err, client address is 0x1c [20110106]
<4>[ 2.365247] mma8452 devid:d
<6>[ 2.368117] rk29_i2c rk29_i2c.0: addr: 0x1c receive no ack
<3>[ 2.373672] rk29_i2c rk29_i2c.0: i2c transfer err, client address is 0x1c [20110106]
<6>[ 2.381496] rk29_i2c rk29_i2c.0: addr: 0x1c receive no ack
<3>[ 2.387074] rk29_i2c rk29_i2c.0: i2c transfer err, client address is 0x1c [20110106]
<4>[ 2.394826] mma8452_probe mma8452 detect err!
<4>[ 2.399189] gs_mma8452: probe of 0-001c failed with error -1
<6>[ 2.405236] DMARD06A compass driver: init
<6>[ 2.409342] rk29_i2c rk29_i2c.0: addr: 0x1c receive no ack
<3>[ 2.414913] rk29_i2c rk29_i2c.0: i2c transfer err, client address is 0x1c [20110106]
<4>[ 2.422652] dmard06_probe DMAR06 detect err!
<4>[ 2.426939] gs_dmard06: probe of 0-001c-1 failed with error -1
<4>[ 2.432792] i2c-core: driver [gs_dmard06] using legacy suspend method
<4>[ 2.439243] i2c-core: driver [gs_dmard06] using legacy resume method
<6>[ 2.452765] using rtc device, tps65910_rtc, for alarms
<6>[ 2.457777] tps65910_rtc tps65910_rtc: rtc core: registered tps65910_rtc as rtc0
<6>[ 2.465712] TPS65910 RTC device successfully registered
<6>[ 2.475278] lirc_dev: IR Remote Control driver registered, major 252
<6>[ 2.481716] IR NEC protocol handler initialized
<6>[ 2.486271] IR RC5(x) protocol handler initialized
<6>[ 2.491062] IR RC6 protocol handler initialized
<6>[ 2.495603] IR JVC protocol handler initialized
<6>[ 2.500130] IR Sony protocol handler initialized
<6>[ 2.505094] IR RC5 (streamzap) protocol handler initialized
<6>[ 2.510661] IR LIRC bridge handler initialized
<6>[ 2.515114] Linux video capture interface: v2.00
<4>[ 2.625746] rk2918_low_battery_check: gBatVoltage = 3800, gBatCapacity = 69
<6>[ 2.633178] rk2918_battery: driver initialized
<6>[ 2.637800] device-mapper: uevent: version 1.0.3
<6>[ 2.642616] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<4>[ 2.711763] rk29_sdmmc_change_clk_div..1682.. newDiv=
, newCLK=300Khz====xbw[sd_mmc]=====
<4>[ 2.725265]
<4>[ 2.725269] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....======xbw[mmc0]=====
<4>[ 2.735259] .Line3371..The End of SDMMC-probe Ver.2.16 The last modify date is 2012-02-13,modifyed by XBW. ===xbw[sd_mmc]===
<4>[ 2.735269]
<4>[ 2.753097] rk29_sdmmc_change_clk_div..1682.. newDiv=40, newCLK=300Khz====xbw[sdio]=====
<4>[ 2.761405] .Line3371..The End of SDMMC-probe Ver.2.16 The last modify date is 2012-02-13,modifyed by XBW. ===xbw[sdio]===
<4>[ 2.761415]
<6>[ 2.775749] usbcore: registered new interface driver usbhid
<6>[ 2.781317] usbhid: USB HID core driver
<6>[ 2.785483] logger: created 256K log 'log_main'
<6>[ 2.790086] logger: created 256K log 'log_events'
<6>[ 2.795926] logger: created 256K log 'log_radio'
<6>[ 2.802659] logger: created 256K log 'log_system'
<4>[ 2.807483] ---- gpu regbase: 0xd3050000 ----
<4>[ 2.811941]
<4>[ 2.811944] mmc_attach_sd..1216.. ===== Begin to identify card as SD-card ===xbw[mmc0]===
<4>[ 2.855660] -----> dma_alloc_writecombine 1 pages!
<4>[ 2.860465] -----> dma_alloc_writecombine 1 pages!
<4>[ 2.865306] -----> dma_alloc_writecombine 128 pages!
<4>[ 2.871145] -----> dma_alloc_writecombine 1 pages!
<4>[ 2.880932] ##################### rt5621_i2c_probe ######################
<4>[ 2.887747] ########################### set spk_con HIGH ##################################
<4>[ 2.903892] ##################### rt5621_probe ######################
<4>[ 2.919094] rk29_sdmmc_change_clk_div..1682.. newDiv=1, newCLK=24000Khz====xbw[sd_mmc]=====
<6>[ 2.927968] mmc0: new SDHC card at address e624
<6>[ 2.932759] mmcblk0: mmc0:e624 SU16G 14.8 GiB
<4>[ 2.941596]
<4>[ 2.941601] msdos_partition..461... ==== Begin to parse sdcard-partition. ====xbw[mmc0]===
<4>[ 2.951833] msdos_partition..530... ==== The sdcard has MBR. ====xbw[mmc0]===
<4>[ 2.959015] msdos_partition..543... ==== partition-1, size=15554048KB ====xbw[mmc0]===
<4>[ 2.967412] msdos_partition..571... ==== main partition-1....====xbw[mmc0]===
<6>[ 2.974563] mmcblk0: p1
<4>[ 2.977557] mmc_rescan_try_freq..1717.. ===== Initialize SD-card successfully. ===xbw[mmc0]===
<4>[ 2.986633]
<4>[ 2.986636] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....======xbw[mmc1]=====
<4>[ 2.996577]
<4>[ 2.996580] =================
<4>[ 2.996584] mmc_rescan..1830.. ====find no SDMMC host.====xbw[mmc1]=====
<6>[ 3.245591] asoc: RT5621 HiFi <-> rk29_i2s.0 mapping ok
<6>[ 3.251562] ALSA device list:
<6>[ 3.254633] #0: RK29_RT5621
<6>[ 3.257751] GACT probability NOT on
<6>[ 3.261256] Mirror/redirect action on
<6>[ 3.264967] u32 classifier
<6>[ 3.267679] Actions configured
<6>[ 3.271091] Netfilter messages via NETLINK v0.30.
<6>[ 3.276253] nf_conntrack version 0.5.0 (12551 buckets, 50204 max)
<6>[ 3.282696] ctnetlink v0.93: registering with nfnetlink.
<6>[ 3.288094] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.295409] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.301464] xt_time: kernel timezone is -0000
<6>[ 3.306063] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.311542] arp_tables: (C) 2002 David S. Miller
<6>[ 3.316236] TCP cubic registered
<6>[ 3.319573] NET: Registered protocol family 10
<6>[ 3.324652] Mobile IPv6
<6>[ 3.327124] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.332676] IPv6 over IPv4 tunneling driver
<6>[ 3.337634] NET: Registered protocol family 17
<6>[ 3.342098] NET: Registered protocol family 15
<5>[ 3.346621] Bridge firewalling registered
<6>[ 3.350659] NET: Registered protocol family 35
<3>[ 3.355309] RK29 Camera driver version: v0.1.10
<6>[ 3.359911] SENSOR_CONFIG tool_config_platfrom: name-mt9d112_back, gpio_powerdown-123, gpio_flag-4
<6>[ 3.368904] SENSOR_CONFIG tool_config_platfrom: name-gc0307_front, gpio_powerdown-133, gpio_flag-4
<6>[ 3.513869] camera 33-0-mt9d112_back: Probe mt9d112_back success
<6>[ 3.623860] camera 33-1-gc0307_front: Probe gc0307_front success
<4>[ 3.630197] ipp irq 46
<6>[ 3.632856] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>[ 3.640600] ThumbEE CPU extension supported.
<6>[ 3.645808] GT811-TS 2-005d: Install gt811 driver.
<6>[ 3.650600] GT811-TS 2-005d: Driver Release Date:2012-02-08
<4>[ 4.004899] gt811 chiptype is 9
<4>[ 4.008133] 811=============
<6>[ 4.024339] GT811-TS 2-005d: GT811 init info:X_MAX=480,Y_MAX=800,TRIG_MODE=FALLING EDGE
<6>[ 4.074146] input: gt811_ts as /devices/virtual/input/input2
<6>[ 4.080081] GT811-TS 2-005d: Start gt811_ts in interrupt mode,Driver Modify Date:2012-01-05
<6>[ 4.093673] tps65910_rtc tps65910_rtc: setting system clock to 2012-11-11 14:20:44 UTC (1352643644)
<4>[ 4.102879] Request GPIO SPK_CON Failed!
<4>[ 4.107221] rk29-speaker: probe of rk29-speaker failed with error -5
<6>[ 4.113891] rk29_serial rk29_serial.1: baud:115200
<4>[ 4.118714] serial.1 timeout:1000000
<6>[ 4.122591] Freeing init memory: 1148K
<4>[ 4.130459] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[ 4.190767] keychord: using input dev rk29-keypad for fevent
<6>[ 4.196808] rk29_serial rk29_serial.1: baud:115200
<4>[ 4.201597] serial.1 timeout:1000000
<3>[ 4.205410] init: cannot open '/initlogo.rle'
<4>[ 4.246801] rk29xxnand_ko: module license '' taints kernel.
<4>[ 4.252400] Disabling lock debugging due to kernel taint
<4>[ 4.266314] gp_rknand_info = : 0xd2769b00
<4>[ 4.270579] FlashCopyProgBuf1=0xc145b000
<4>[ 4.274578] ATime: 40 ns AHB: 144 timming: 1081
<4>[ 4.279113] No.1 FLASH INFO:2c 88 4 4b a9
<4>[ 4.283132] No.3 FLASH INFO:2c 88 4 4b a9
<4>[ 4.288210] ATime: 32 ns AHB: 144 timming: 1061
<4>[ 4.292887] ATime: 32 ns AHB: 144 timming: 1061
<4>[ 4.297433] randomizer = 0 , EccBits = 18
<4>[ 4.355394] FTL INFO:Version = 436,Date = 20120518
<4>[ 4.360173] totalLogicBlkRaw = 3951
<5>[ 4.363999] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[ 4.370354] Creating 10 MTD partitions on "rk29xxnand":
<5>[ 4.375622] 0x000000400000-0x000000800000 : "misc"
<5>[ 4.381761] 0x000000800000-0x000001000000 : "kernel"
<5>[ 4.387772] 0x000001000000-0x000002000000 : "boot"
<5>[ 4.393541] 0x000002000000-0x000003000000 : "recovery"
<5>[ 4.399727] 0x000003000000-0x000012000000 : "backup"
<5>[ 4.406234] 0x000012000000-0x000019400000 : "cache"
<5>[ 4.412336] 0x000019400000-0x000059400000 : "userdata"
<5>[ 4.420944] 0x000059400000-0x000059800000 : "kpanic"
<6>[ 4.427266] apanic: Bound to mtd partition 'kpanic'
<6>[ 4.432148] apanic: No panic data available
<5>[ 4.436535] 0x000059800000-0x000079800000 : "system"
<5>[ 4.443644] 0x000079800000-0x0003dbc00000 : "user"
<4>[ 4.479523] startBlk = 84 sysProtAddr = 83
<6>[ 4.519561] EXT3-fs: barriers not enabled
<6>[ 4.523826] EXT3-fs (mtdblock8): mounted filesystem with ordered data mode
<6>[ 4.530911] kjournald starting. Commit interval 5 seconds
<6>[ 4.556813] EXT3-fs: barriers not enabled
<6>[ 4.561142] EXT3-fs (mtdblock6): using internal journal
<6>[ 4.566411] kjournald starting. Commit interval 5 seconds
<6>[ 4.571908] EXT3-fs (mtdblock6): mounted filesystem with ordered data mode
<6>[ 4.587412] EXT3-fs: barriers not enabled
<6>[ 4.591739] EXT3-fs (mtdblock5): using internal journal
<6>[ 4.597028] kjournald starting. Commit interval 5 seconds
<6>[ 4.602525] EXT3-fs (mtdblock5): mounted filesystem with ordered data mode
<4>[ 4.613361] __AT18 File AT18_FILP present already.
<3>[ 4.735092] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[ 4.816301] android_usb: already disabled
<6>[ 4.820801] adb_bind_config
<6>[ 4.829445] rk29_serial rk29_serial.1: baud:115200
<6>[ 4.834255] DWC_OTG: USB SUSPEND
<4>[ 4.841651] serial.1 timeout:1000000
<6>[ 4.855344] adb_open
<4>[ 5.274487] .334.. MMC0 receive the message sd-No-Media from VOLD.====xbw[sd_mmc]====
<4>[ 5.282339] .378.. MMC0 receive the message No-Media from VOLD. waitTimes=0 ====xbw[sd_mmc]====
<4>[ 5.298474] .334.. MMC0 receive the message sd-Pending from VOLD.====xbw[sd_mmc]====
<4>[ 5.310477] .334.. MMC0 receive the message sd-Idle-Unmounted from VOLD.====xbw[sd_mmc]====
<4>[ 5.323591] Current WiFi chip is RTL8188.
<3>[ 6.642519] init: sys_prop: permission denied uid:1013 name:sys_graphic.cam_hal.ver
<3>[ 6.653694] mt9d112 sensor_ioctl cmd(0x3) is unknown !
<3>[ 6.665686] init: sys_prop: permission denied uid:1013 name:sys_graphic.cam_driver.ver
<3>[ 6.843966] gc0307 sensor_ioctl cmd(0x3) is unknown !
<3>[ 6.849290] init: sys_prop: permission denied uid:1013 name:sys_graphic.cam_driver.ver
<3>[ 7.220417] init: sys_prop: permission denied uid:1003 name:sys.gvglk.version
<3>[ 7.240862] init: sys_prop: permission denied uid:1003 name:sys.gvglu.version
<4>[ 7.904470] gpu: change freq to 552, got 426
<6>[ 15.448812] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[ 17.673831] DWC_OTG: ********vbus detect*********************************************
<6>[ 18.042829] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 18.050669] DWC_OTG: USB SUSPEND
<6>[ 18.313634] DWC_OTG: USB RESET
<6>[ 18.490556] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 18.495963] DWC_OTG: USB RESET
<6>[ 18.744444] android_usb gadget: high speed config #1: android
<6>[ 18.750362] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 20.491613] request_suspend_state: wakeup (3->0) at 20497818390 (2012-11-11 14:21:00.891485583 UTC)
<4>[ 20.729291] Current WiFi chip is RTL8188.
<6>[ 20.884592] acc_open
<6>[ 20.886802] acc_release
<4>[ 21.930893] AT18 Check file exit
<4>[ 22.724834] hj---->open file /data/bat_last_capacity.dat failed
<4>[ 22.749506] truecapacity = 70
<3>[ 26.596036] init: sys_prop: permission denied uid:10002 name:sys.gvglk.version
<3>[ 26.657887] init: sys_prop: permission denied uid:10002 name:sys.gvglu.version
<6>[ 26.672213] vpu_mem: request for physical address of vpu_mem region from process 203.
<4>[ 26.775217] vpu: power on
<4>[ 27.252137] .334.. MMC0 receive the message sd-Checking from VOLD.====xbw[sd_mmc]====
<4>[ 27.282936] .334.. MMC0 receive the message sd-Mounted from VOLD.====xbw[sd_mmc]====
<4>[ 27.882233] AT18 Check OK file exit
<4>[ 28.608384] AT18 Check OK file exit
<4>[ 30.813874] delayed vpu: power off...done
<3>[ 34.237275] init: sys_prop: permission denied uid:10038 name:sys.gvglk.version
<3>[ 34.237469] init: sys_prop: permission denied uid:10038 name:sys.gvglu.version
<4>[ 34.384385] AT18 Check OK file exit
<4>[ 58.871111] gpu: change freq to 288, got 288
<4>[ 58.914929] gpu: change freq to 552, got 426
<4>[ 64.022125] gpu: change freq to 288, got 288
<4>[ 64.088045] gpu: change freq to 552, got 426
<4>[ 79.633099] gpu: change freq to 288, got 288
<4>[ 79.761509] gpu: change freq to 552, got 426
<4>[ 139.682730] gpu: change freq to 288, got 288
<4>[ 139.888979] gpu: change freq to 552, got 426
<4>[ 152.421106] gpu: change freq to 288, got 288
<4>[ 158.183911] gpu: change freq to 552, got 426
<4>[ 158.535304] mma7660_get_data:mma7660_GetData axis = 0 0 0--dropCount=1--
<6>[ 166.143021] vpu_mem: request for physical address of vpu_mem region from process 326.
<4>[ 166.175642] vpu: power on
<4>[ 168.469700] AT18 Check OK file exit
<4>[ 170.263834] delayed vpu: power off...done
<4>[ 174.602013] set_msc_connect_flag status = 0 20101216
<6>[ 174.608090] adb_release
<3>[ 174.658612] android_usb: already disabled
<6>[ 174.673647] DWC_OTG: USB SUSPEND
<6>[ 175.081038] DWC_OTG: USB RESET
<6>[ 175.279140] DWC_OTG: USB RESET
<6>[ 175.500920] android_usb gadget: high speed config #1: android
<6>[ 175.506948] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 187.268393] vpu: power on
<4>[ 189.114566] gpu: change freq to 288, got 288
<4>[ 189.213745] gpu: change freq to 552, got 426
<4>[ 191.102581] set_msc_connect_flag status = 0 20101216
<3>[ 191.183255] android_usb: already disabled
<6>[ 191.190610] adb_bind_config
<6>[ 191.196667] DWC_OTG: USB SUSPEND
<6>[ 191.211357] adb_open
<4>[ 191.323830] delayed vpu: power off...done
<6>[ 191.529523] DWC_OTG: USB RESET
<6>[ 191.709925] DWC_OTG: USB RESET
<6>[ 191.932106] android_usb gadget: high speed config #1: android
<6>[ 191.932312] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 196.427379] gpu: change freq to 288, got 288
<4>[ 198.836012] gpu: change freq to 552, got 426
<4>[ 206.206015] gpu: change freq to 288, got 288
<4>[ 629.983302] gpu: change freq to 552, got 426
<4>[ 679.640845] gpu: change freq to 288, got 288
<4>[ 679.687823] gpu: change freq to 552, got 426
<4>[ 739.639954] gpu: change freq to 288, got 288
<4>[ 774.562665] gpu: change freq to 552, got 426
<4>[ 799.640649] gpu: change freq to 288, got 288
<4>[ 859.679936] gpu: change freq to 552, got 426
<4>[ 869.040474] gpu: change freq to 288, got 288
<4>[ 869.148894] gpu: change freq to 552, got 426
<3>[ 872.497058] init: sys_prop: permission denied uid:10076 name:sys.gvglk.version
<3>[ 872.517906] init: sys_prop: permission denied uid:10076 name:sys.gvglu.version
<4>[ 873.109717] AT18 Check OK file exit
<4>[ 873.214365] AT18 Check OK file exit
<4>[ 877.728512] gpu: change freq to 288, got 288
<4>[ 877.743480] gpu: change freq to 552, got 426
<4>[ 888.862807] gpu: change freq to 288, got 288
<4>[ 888.882875] gpu: change freq to 552, got 426
<4>[ 905.369939] gpu: change freq to 288, got 288
<4>[ 905.428064] gpu: change freq to 552, got 426
<3>[ 908.180988] init: sys_prop: permission denied uid:10056 name:sys.gvglk.version
<3>[ 908.199692] init: sys_prop: permission denied uid:10056 name:sys.gvglu.version
<4>[ 908.321081] AT18 Check OK file exit
<4>[ 934.341574] gpu: change freq to 288, got 288
<4>[ 936.131875] gpu: change freq to 552, got 426
<4>[ 941.568619] gpu: change freq to 288, got 288
<4>[ 943.157069] gpu: change freq to 552, got 426
<4>[ 957.546786] gpu: change freq to 288, got 288
<4>[ 957.626278] gpu: change freq to 552, got 426
<4>[ 960.868676] gpu: change freq to 288, got 288
<4>[ 960.985049] gpu: change freq to 552, got 426
<4>[ 963.978970] gpu: change freq to 288, got 288
<4>[ 965.924699] gpu: change freq to 552, got 426
<4>[ 974.685080] gpu: change freq to 288, got 288
<4>[ 974.776875] gpu: change freq to 552, got 426
<4>[ 979.653681] gpu: change freq to 288, got 288
<4>[ 979.729006] gpu: change freq to 552, got 426
<4>[ 983.538153] gpu: change freq to 288, got 288
<4>[ 983.619529] gpu: change freq to 552, got 426
[email protected]:/ #
 

·
Registered
Joined
·
1 Posts
Help with an RK2918 tablet

I got this tablet with the following specs. but unfotunatly i'm brick it and looking for original rom ...

*Model RK2918
*Version 4.0.3
*Kernel [email protected] #41
*Build vastking_tablet_os_4.0.3 20120512_v1.0 rk2918_zm11001_t03_s01_a01_c02_m02_20120524_v1.01
*Processor: Rockchip2918
*CPU Clock Speed: Frequency 1.2GHz
*Operation System: Google Android 4.0
*Screen: 10.2 inch 16:9 wide TFT LED screen
*Resolution: 1024×600 pixels
*RAM: 512M DDR3
*Hard Disk: 4G
*TF card: Support Micro SD/T-Flash, Max 32GB
*3G: Support external USB dongle
*WIFI: Built in IEEE 802.11/b/g wireless internet
*Camera: Front 1.3 Mega pixels.
*Speaker: Built-in stereo loud speakers
*HDMI: Support 1080P
*G-sensor: Support 360 degree directions
 

·
Registered
Joined
·
1 Posts
I need help for my RK2918 tablet .
the brand is Kata

Model is T1

I cant access ADB shell i always get the error-/system/bin/sh is not found
i have successfully rooted it however when im trying to flash a rom by oodys it got bricked..
please help me..

I've been looking for KATA T1 Firmware or anything similar so I can use it.... please help me thanks in advance~
 
1 - 7 of 7 Posts
Top