Android Tablets Forum banner
1 - 1 of 1 Posts

The Hand That Smites
652 Posts
Discussion Starter · #1 ·
[Kernel] [EURO] [1.4ghz OC/UV] MCR EXT4 compatible/Voodoo Sound V15 22/02
What's in the package:

  • Galaxy TAB (euro) kernel
  • 1.4Ghz clockspeed (stock voltage)
  • Voodoo Sound patch (search the market for the Voodoo Control App)
  • 100 % MCR EXT4 compatible
  • UV control by sysfs or app (thanks to xan)
  • Camera/key-backlight working
  • Filesystem support - EXT2/EXT3/EXT4
  • frequencies 100/200/400/800/1000/1200/1400
  • rooted adb shell
  • ClockworkMod 3 (thanks to Paul Obrien)

Some info about the undervolt control:

- full UV user control via sysfs
- works on all governor
- echo "50 50 150 75 75 100" >/sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table
- column 1 for 1.4ghz, 2 for 1.2ghz, 3 for 1000mhz, 4 for 800mhz, 5 for 400mhz, 6 for 200mhz and lastly 100mhz
-values are mV
- Use xan's app if you don't like to work in terminal/adb here

Always BACKUP your stuff before flashing anything.

Flash with recovery

If you've got general issues, please note your current ROM and version, including your TAB version i.e. Euro P1000
If you can, include a logcat
If you can't, try taking a picture of the issue (if it's visible)
Describe what you were doing at the time, as much information as possible...


You can flash with recovery.
or extract the zip and use Heimdall to flash the zImage (kernel directory)
Heimdall must be version 1.1.0 or greater
You MUST have the libusb drivers WORKING in download mode before you can flash using Heimdall.

Use the command line:
heimdall flash --kernel zImage
where zImage is the name of the kernel, full path names are allowed.


Galaxy Tab 1.4Ghz V15

If you are running an older rom and have problems with the temperature use this one:
Galaxy Tab 1.4Ghz V15 patched temp

If you have a problem with the sensors just push this file to /system/lib/hw :


Kernel Source:


acollwill (testing and posting useful comments)
Rotohammer (for the bootloader fix).
Chainfire (Bootloader App/Clockworkmod 3)
techomancer (uploading the original source)
koxudaxi (1.4Ghz patch and modified voltage control app)
Paul Obrien (initramfs)


Version 15:

*changed recovery keys (extra keys, previous keys still working):
up = menu
down = search
ok = home
back = back

Version 14:

*Add int voltage UV (thanks to Koxudaxi)
*Add 600Mhz (thanks to Koxudaxi)

Version 13:

*update sensors drivers (all sensors seems to work on MCR R1)

Version 12:

*Ondemand governor default
*Added interactive governor
*sensors file to previous version

Version 11:

* Added Voodoo sound patches (search the market for the Voodoo Control App)
* Added tun.ko and cifs.ko to the
* Updated the sensor drivers

Version 10:

*Added 1.4Ghz
*changed initramfs to MCR (ext4) version

Version 6:

  • Fixed sdcard card mount
  • run scripts from /system/etc/init.d
Version 5:
  • fix filesystem detection for nandroid backup (RFS + EXT4)
Version 4:
  • Fixed colour density
  • Tested with ext4 (Roto JME v4 converted with koush recovery, 2000+ quadrant)
Version 3:
  • removed bootlogo
  • Changed initramfs for ext4 system and data support
  • Add BFQ disk scheduler (default)
  • lowmemorykiller: don't unregister notifier from atomic context
  • rcu: "Tiny RCU", The Bloatwatch Edition
Version 2:
  • Reduced size of kernel.
Version 1:
  • Galaxy TAB (euro) kernel
  • 1.2Ghz clockspeed (stock voltage)
  • UV control by sysfs or app (thanks to xan)
  • Camera/key-backlight working
  • Filesystem support - EXT2/EXT3/EXT4/RFS
  • frequencies 100/200/400/800/1000/1200
  • rooted adb shell
  • ClockworkMod 3 (thanks to Chainfire)

1 - 1 of 1 Posts