[percoco2000]

I own a generic android tablet, ly-706, similar but not equal to epad (none of the firmware works) and i cannot get my g-sensor work. Tryng some "sensor test" apps, it is recognized, but give no signals. Any of you has a working G-Sensor? Tanks.

 

[TheCopacabanaMan]

Yes, i have a (less or more) working g-sensor both on FlyTouch, and on Eken M001.That is, g-sensor works when it is in good mood, when it is in the right astrological combination, when there is the appropriate weather, when there are beautiful topless gals fussing at it, etc.Most of the times, one (or more) of the above situations don't happen, and my g-sensor refuses to work.Qualche volta voglio prendere a calci il g-sensor, per vedere se gli passano i capricci...

 

[tipstir]

Mine works.

 

[percoco2000]

Have you got an idea of how it works? Hai idea di come funzioni (moduli del kernel e relativa device) ?

 

[Erlang]

Mine works at least when i want to change portrait/landscape.

 

[percoco2000]

please tell me which tablet / OS

 

[Erlang]

FlyTouch 1.9.88Worked with all firmware since 1.7.2. Switchable in main menu.

 

[TheCopacabanaMan]

Percoco, 'scolta: did you try any combintion of the setting?For me, g-sensor worked (and not worked) when i set options in the game menu.Normally, it works very slow, and sometimes dont work at all.Yours did not work no one time? Non ha mai funzionato?

 

[bnorontako]

mine is working but working backward, when you slide to right the ball move to left (in labyrinth game), to enable the g-sensor go to setup (impostazioni)-audio and display- orientation (orientamento) and check that, and for gravity sensor choose normal mode. i use epad flytouch firmware 1.9_88. fammi sapere

 

[percoco2000]

MMMM Quanti italiani!!!???No, never worked. Tried all combination of setting. NO! Tried test sensor applet, recognized (vm8505 ) but no data.Looked at "dmesg" and the sensor is initialized (mm7660a ) and assigned to input3Even tried #cat /dev/input/event3 no diplay output...#cat /dev/input/event1 put out some data when touching the screen

 

[HidePerso]

My sensor was work badly before reflashing. After 1.988 i got it in mirror state but can fix for right - read more here

 

[bnorontako]

i had done it, but still my gravity sensor backward

 

[fV46OEZTCN4S]

[quote name='bnorontako;47292]i had done it' date=' but still my gravity sensor backward[/QUOTE']Did you follow the link and and the procedure that HidePerso gave you? It worked perfectly to reverse mine.

 

[bnorontako]

ok now it's fix, i just miss one of procedure, thank's to hideperso

 

[percoco2000]

Can you please test it using "sensor test" from the market?

 

[HidePerso]

Any wish on your money

 

[percoco2000]

Very Thank you HidePersoUhmmmm i'm starting to think that my g-sensor is broken... I tried almost everything

 

[TheCopacabanaMan]

Ciao, Percoco; come va stamattina? Hai provato a istallare qualche altro firmware, magari il firmware che hai dentro ha i driver sbagliati...Macaroni-English: Hi Compare Percoco, how r ya this morninghe? Did you try to istalla some other firmwaro; maybe the firmwaro istallad has the wrongie drivere...

 

[percoco2000]

Ho provato altri firmware, ma niente.. Tra l'altro alcuni sballano i tasti, e sono inusabili.P.S. Ma il driver non e' sensor_mm7660.ko ? P.S.S. Hai un'account msn o skype per contatto diretto?I tried many firmwares, but same results. But my pad isn't a true flytoch, but a clone.

 

[TheCopacabanaMan]

Per il driver, non so dirti. Non conosco Linux cosi' a fondo Il mio Skype te lo mando per mess. privato, ma non lo accendo quasi mai, che' qui in azienda non sono molto contenti, se passo le giornate a chiaccherare