Try to flash it again, this time with a working script folder. if your lucky you'll see the coutndown again.(if your device is on you see it with a VERY dim red light under the power-button, it has to go off for the device to be off, put the SD-Card in and turn power on again)master5;7629 said:left sd card with script folder in and it only flashed to the logo updated and ran out of power no it won't come on. the screen flashes white but the is it. is there an hard reset
Try reformatting your sd card, redownloading the firmware, and re-installing the firmware. If you're getting text, you're not bricked yet.alex_grach;9098 said:Hello!I have just received my M003. It's deadI've downloaded original update. It hangs on the following:Erasing File-System partition...--> Erasing File-System partition Fail! Exit!Maybe the kernel don't support this NAND FlashWhat could it be???? Any suggestions?
You may be screwed.Anyone figure out how to maybe manually charge pathways to "unflash" the chip in one of these? I've always wondered if that were possible...fska;10790 said:just blink screen and VERY dim red lightand nothingbrick?