[reece]

need help i cant get root access on sd 1.3 any help much apreciated. does any 1 no if they asre plkaning on releasing this FW already rooted lyk ecotox has done?regards

 

[Nasedo]

Install terminal application, for example: BetterTerm15.apkRun it, and write:suThat's it.

 

[enotar]

[quote name='Nasedo;10664]Install terminal application' date=' for example: BetterTerm15.apkRun it, and [URL=write:suThat's]write:suThat's[/URL] it.[/QUOTE']Doesnt work!

 

[xboxhacker]

Installed terminal and superuser.Turned on debugging.Ran terminal... typed su ....NADASame steps i took in SD v1.2 .... 1.3 must be missing a file or something

 

[neuromancer]

Same here. Followed same process as 1.2, but no result. I really want to run swap but need root. In every other way this one rocks!

 

[Willo]

Ye root wasnt implemented properly in this one, ill release an update ina a day or two with a fix, or you could use this method by zipper_x Re: Rooted... Here the How-To: -Download this package: http://www.rapidshare.com/files/387342034/eken_tools.zip -Then use the official updated ROM (script folder) -Open android_fs.tgz with 7zip and add the "su" command in system/bin without uncompressing it. -Change update.sh with the one in the package -Put the script folder on SD card and update your firmware a usual -Install superuser.apk -Install connectbot.apk -Put your device in debug mode (Settings/Appplications/Developement/USB debugging) -Start ConnectBot and open a local session -Type su and wait few seconds -A window will popup informing you that su want root:root. Click alway allow... -And voila you have root

 

[Willo]

Ye root wasnt implemented properly in this one, ill release an update ina a day or two with a fix, or you could use this method by zipper_x Re: Rooted... Here the How-To: -Download this package: http://www.rapidshare.com/files/387342034/eken_tools.zip -Then use the official updated ROM (script folder) -Open android_fs.tgz with 7zip and add the "su" command in system/bin without uncompressing it. -Change update.sh with the one in the package -Put the script folder on SD card and update your firmware a usual -Install superuser.apk -Install connectbot.apk -Put your device in debug mode (Settings/Appplications/Developement/USB debugging) -Start ConnectBot and open a local session -Type su and wait few seconds -A window will popup informing you that su want root:root. Click alway allow... -And voila you have root

 

[enotar]

This method does not work anymore with 1.7.4Update stop when looking for script/android_fs.tgz as it change to script/android_fs.tarNeed to modify update.shI am not sure but it looks a little tricky

 

[jm0055]

Yep..update.sh looks for .tgz, so I renamed the .tar files to .tgz and it seemed like it updated fine..took the SD card and went to boot, and it's just a black screen for 10+ mins.

 

[enotar]

[quote name='jm0055;11291]Yep..update.sh looks for .tgz' date=' so I renamed the .tar files to .tgz and it seemed like it updated fine..took the SD card and went to boot, and it's just a black screen for 10+ mins.[/QUOTE'] Not sure if I'll do that!

 

[rizapn]

How to root the device without re-flashing the ROM (by modifying the tgz/tar/update.sh) ?- create a scriptcmd which only load linuxrc into the RAM (no saveenv & nand modification), and boot to that linuxrc- create the update.sh which is "only" rename the original su, and copy the cracked su to the /system/bin folder ..I believe it is more safe than any other method ...

 

[rizapn]

How to root any EKEN or EKEN like without reflashing the whole NAND, or even without modifying any part of it using NAND command Download the file from this link : http://u.kaskus.us/5/cw1xz64u.zipREADME.txt :How to ROOT any EKEN or EKEN-like Chinesse iPad without reflashing the whole NANDby [email protected] - June 2010=======================================================THIS METHOD SHOULD BE VERY SAVE, BUT STILL ... ANY RISK IS YOURS!it is your decision to follow this step, or just read it as a reference ...

- extract all files in the rooted-script-only.zip file into your microSD Card script folder- copy uzImage.bin and mvl5_v5t_ramdisk_WM8505.090922.loop.gz file from the original EKEN-M001 1.7.2 update or from the latest EKEN update- run a normal upgrade process, by putting the microSD card followed by restarting the device- if everything goes normal, you should see an instruction to eject the microSD card and device will be restarted- from your ANDROID, open Terminal, type 'su' ... if it is denied, type su2 and then followed by suWHY THIS METHOD IS VERY SAVE?Because it will inject a temporary OS (linuxrc) into the RAM WITHOUT modifying any part of the NAND.Then, any 'modification' will be done by update.sh, in this case: update.sh will :- rename the original su in the folder /busybox- copy su and su2 files into the /system/bin- that's it su and su2 files are taken from other forum ...Hope it is usefull,May Allah Bless All of Us,[email protected] - Jakarta.Indonesia

 

[enmoo]

Please try this one-Download the file from http://rapidshare.com/files/404464520/Slatedroid1.3update.sh.zip.html-Change update.sh with the one in the package-Copy the eken_tools.zip "su" command in script/pre_root_disk/system/bin-Put the script folder on SD card and update

 

[reece]

how do u activate debigging for rooting SD V1.2?, thanks in advance

 

[reece]

hi could ssome one plz explain how to activate debigging so i can get root on slatdroid version 1.2? thnks in advance

 

[delahaya]

Same problem. Cannot get it to work.

 

[rhcp011235]

http://www.rapidshare.com/files/387342034/eken_tools.zip[/url] -Then use the official updated ROM (script folder) -Open android_fs.tgz with 7zip and add the "su" command in system/bin without uncompressing it. -Change update.sh with the one in the package -Put the script folder on SD card and update your firmware a usual -Install superuser.apk -Install connectbot.apk -Put your device in debug mode (Settings/Appplications/Developement/USB debugging) -Start ConnectBot and open a local session -Type su and wait few seconds -A window will popup informing you that su want root:root. Click alway allow... -And voila you have root

Willo,I hate to be one of those 'people'. that dont appreciate work But, Can you put up a proper rom with root / market working / adhocIve personally tested all root methods none work. And I think your rom is the best out there. its fast. responsive. but its missing key points

 

[rhcp011235]

So anything guys?

 

[rhcp011235]

Check out my mod. I have rooted the firmware. and i am deving on it.

 

[stickedy]

http://u.kaskus.us/5/cw1xz64u.zip[/url]README.txt :How to ROOT any EKEN or EKEN-like Chinesse iPad without reflashing the whole NANDby [email protected] - June 2010=======================================================THIS METHOD SHOULD BE VERY SAVE, BUT STILL ... ANY RISK IS YOURS!it is your decision to follow this step, or just read it as a reference ...

- extract all files in the rooted-script-only.zip file into your microSD Card script folder- copy uzImage.bin and mvl5_v5t_ramdisk_WM8505.090922.loop.gz file from the original EKEN-M001 1.7.2 update or from the latest EKEN update- run a normal upgrade process, by putting the microSD card followed by restarting the device- if everything goes normal, you should see an instruction to eject the microSD card and device will be restarted- from your ANDROID, open Terminal, type 'su' ... if it is denied, type su2 and then followed by suWHY THIS METHOD IS VERY SAVE?Because it will inject a temporary OS (linuxrc) into the RAM WITHOUT modifying any part of the NAND.Then, any 'modification' will be done by update.sh, in this case: update.sh will :- rename the original su in the folder /busybox- copy su and su2 files into the /system/bin- that's it su and su2 files are taken from other forum ...Hope it is usefull,May Allah Bless All of Us,[email protected] - Jakarta.Indonesia

Thanks! It worked fine and without problems for me!!