[donaldson]

Great video. Of course, after pulling mine apart more than a few times, the plastic catcher clips on the top are not what they used to be. Rather than a jeweller's screw driver, I like using a stiff guitar pick to prise apart the two halves. Just less chance of scatching the plastic. But that again is coming from the guy who uses a little crazy glue now and then to keep his EKEN in one piece. ;D

 

[donaldson]

[quote author=sed8ed link=topic=335.msg5891#msg5891 date=1275906564]I carefully soldered it back on and tinned the wire first, I didnt even apply the solder tip to the joint, just let the heat from the wire pass through and whalla!!! [/quote]Now that's good soldering technique! Tinning and then heating through the source so as not to overheat the board. You know what you're doing, for sure!