Android Tablets Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
so today i put my tablet into hibernate thinking it would save battery power. WRONG. when i tried to wake it up, all i got was a black screen and then it rebooted. it started to load and then the progress bar stopped moving. for a long time. i hard rebooted it and same thing. i was told by the person whom i bought it from to flash the hardware and they gave me the 1.8.2 firmware. i came home and loaded it up on to my SD card and it put it in and it started to do something and then FROZE again at the upgrading file-system portion of the flash. i get a progress bar, it moves back and forth 2-3x and freezes again. i am at a loss right now and feel like i might have a nice expensive LED light because thats all that seems to be working properly right now. i am ready to cry to be honest. please if anyone has any suggestions for me to try other than trying other firmware because i've done that, please let me know. i have read that some people have had success after letting the device completely die. why would this work? please help.
 

·
Registered
Joined
·
2 Posts
・MicroSD for recovery is set. ・Power on. ・It leaves just as it is. (It is discharged until the power supply doesn't enter even if it switches on. Until the calendar is reset.)・The AC adaptor ties, and recovery. It was repaired by this. It is an automatic translation. I'm sorry in strange English.
 

·
Registered
Joined
·
2 Posts
I'm sorry only after the restoration ends, reset of the calendar can be confirmed. If it was possible to restore it by this method, the calendar must be January 1, 2000. The power supply doesn't enter even if it switches on when the electrical discharge ends completely. Please recover after this. Wishes that the restoration go well.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #7 ·
SHZ u are correct!so heres the deal. i had to let it die, completely drain the battery and then i was able to flash the firmware. i went to bed feeling super defeated last night, but i took probbies advice, sort of i just left it alone to do its thing, which ultimately meant it died because i didnt have it plugged in. i guess the way these things work is that they store the messed up boot info while its charged and when you turn it on and off its just creating some weird broken boot sequence no matter what happens. its kind of like a modem...you have essentially remove the power to get them to reset. gridwalker came up with this theory and i feel that he is right on the money, because just like him, i had to let my tablet charge down before i made any headway. once it was completely drained, flashing took all of 3 minutes easy breezy and now with the 1.8.2 firmware it runs super smooth, much better than before. so for those of you who have this happen and freak out like i did....let your tablet rest and de-charge. once it wont stay on without it being plugged in, thats when you should flash the firmware. anything else, and you will be making yourself NUTS because it won't work. now for those of you who are saying that it wont come on when you push the power button (quick press, green light goes on then goes off but no screen) you have to hold the power button down for a few secs until it vibrates and turns on. i hope this helps someone and saves them from android induced emotional meltdown like i experienced lol. i have a feeling this is the start of a beautiful love/hate relationship with my droid tablet.
 

·
Registered
Joined
·
4 Posts
[quote name='twees;36535]so today i put my tablet into hibernate thinking it would save battery power. WRONG. when i tried to wake it up' date=' all i got was a black screen and then it rebooted. it started to load and then the progress bar stopped moving. for a long time. i hard rebooted it and same thing. i was told by the person whom i bought it from to flash the hardware and they gave me the 1.8.2 firmware. i came home and loaded it up on to my SD card and it put it in and it started to do something and then FROZE again at the upgrading file-system portion of the flash. i get a progress bar, it moves back and forth 2-3x and freezes again. i am at a loss right now and feel like i might have a nice expensive LED light because thats all that seems to be working properly right now. i am ready to cry to be honest. please if anyone has any suggestions for me to try other than trying other firmware because i've done that, please let me know. i have read that some people have had success after letting the device completely die. why would this work? please help.[/QUOTE'] Is there a way you can post the firmware 1.8.2? I can't find a firmware to work with my Flytouchthanks
 

·
Registered
Joined
·
1 Posts
Guys..
can anyone help me..
im try to upgrade my android apad and then it said that "the kernal version not support this nand flash"
then, my apad died, i cant turn it on even the led light is switched on..
can anyone help me..
i cant do anything,,
there is no reset button on my apad..
my apad died now,,
=(
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top