[crzune]

guys i cant update my firmware whenever i try to the screen just freezes im running flytouch firmware 1.8.2 someone please help me !

 

[timmy]

guys i cant update my firmware whenever i try to the screen just freezes im running flytouch firmware 1.8.2 someone please help me !

Please try to flash it with firmware 1.9_88 and you can find the firmware from here http://www.slatedroid.com/flytouch-epad/5226-%5B-piece-software-flashed-device-expand-its-functionality%5D-flytouch-1-9_88-rooted-market-installed-v0-2-a.html

 

[tipstir]

Settings, SD Card, apply Factory Reset then flash the ROM

 

[crzune]

thanks i'll tell you how it goes

 

[crzune]

guys its still freezing

if only there was a way to delete that stupid animation

 

[timmy]

guys its still freezing

if only there was a way to delete that stupid animation

Try to reflash again with 1.9_88 firmware. This time ensure that your epad battery is totally flat before you reflash it. When battery is flat, then when you press on the power button and nothing will happen. From this point, you should connect your power adapter to your epad and then insert the flash card and power up. Hope this will work. Good luck

 

[imprezza86]

I've run into some strange issues since I bounce back and forth between WinCE and Android. One thing I did find to work was to flash it using the 1.7.4, then I was able to flash to other firmware. The only thing I was able to find is there is some kind of difference from 1.7.4 to the new firmware, especially 1.9.88. I tried to go between 1.9.88 and WinCE and it wouldn't work. So then I flashed it back to 1.7.4 and then always well again. Give it a try.

 

[tipstir]

guys its still freezing

if only there was a way to delete that stupid animation

Is the base HOT to touch? If so? Shut it down and let it cool off and try it again?

 

[HidePerso]

guys its still freezing

if only there was a way to delete that stupid animation

Which PAD u was try to reflash? Flytouch | Epad ? How many memory it have?