Android Tablets Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Hi everyone!

I'm hoping you all can help me confirm which ROM's, or ROM types might be compatible with my tablet. I've been browsing this site and others for a week or so, and this forum seemed to be the most friendly to new users and those who might be unsure of what their cheap tablet really is, so hope you guys can help me decide if I'm on the right track!


I do plan to take this tablet apart to replace the internal microSD card, so if needed I can post internal pics once I open it up, but was kind of waiting until the card arrived to do that so I'd only have to open it up once. Hopefully we might not even have to go there, but I'll still be opening it up anyway so when I do I'll grab pics just in case I ever need them!

If anyone needs more info, ask away and I'll try to get it for you! I believe I've collected enough system info in these images for everyone to help me decide on my current ROM decision, or at least be able to direct me to the right ROM type so I can try a few flashes if my initial one fails. I'm very technically inclined, I build systems and help support many PC users on various forums, so I'm not too worried about having to recover a brick, but hopefully with enough discussion and the right info provided up front that will never happen!


I am considering flashing one of the ROM's in the following Tab10 thread, because after all my digging around, the ones listed here sounded like they might be the most compatible. My tablet has so much contradicting information in it's details, most of which isn't really the same as any mainstream in any generic Superpad 10.2 threads anywhere, so I've had a had time trying to decide what may or may not work!

This is the ROM I was thinking I might try first, Android 2.3 10inch gps Imapx 2011-11-14 android10
http://narod.ru/disk/start/34.dl1sg-narod.yandex.ru/36101406001/haf3691708327ea6b809e4d2968effa9b/android2_3_10inch_gpsImapx_20111114_android10.rar

From this thread
http://www.slatedroid.com/topic/26890-android-tab10/

Hopefully you all can help me decide if my current thoughts on flashing the 2.3 listed above will be OK, or if not, help me find out which ones might work for me, thanks!!!


OK, here's my tablet info, mainly provided in images as that seems like the easiest way to post it! If I've missed anything pertinent please let me know and I'll try to provide it as soon as I can!

---------------------------

Red LED charging light near RJ45 port, 9V charger. NO LED anywhere when charge is complete, or when tablet is in use.

Device does vibrate when turned on! And factory reset works properly, using Power + Home + Front Button combo.

2 TF/MicroSD slots, 2 USB ports, RJ45, Mini HDMI, GPS

model : sawee pad - Not sawee10 + Yonespad10 + wwe10 (See images, a lot of contradictions)
android version 2.2 V2.0:#3048
Kernel 2.6.32.9 [email protected] #6
build: ERE27

infotmic 0.6.1.2(559)

AC Adapter



Full Tablet 'Chopped Images



infoTMIC bootup screen - 0.6.1.2.(559)



Silver/Black Android Booting screen - Right before this screen, in small dot matix text on the left side, it simply says Android at bootup.



Default Build Prop



Android OS About Device - Adding this, because it says "Sawee Pad" for the model#
Please note this is NOT Sawee10 in case this matters, and this contradicts all other system info (IE: Names like Yonespad10 or wwe10 showing in build prop, BuildinfoS Fingerprint and model#), so not sure if it matters or not but adding just in case.



Full relevant Android System Info image (OS, Build Info, CPU, Memory, Screen, ect) - Please click to Enlarge, it's 1024x1752 and I didn't think that would be cool to directly insert


 

·
Registered
Joined
·
8 Posts
Discussion Starter · #2 ·
Nobody can help with this, or do I just need to wait until certain users have looked and they maybe haven't been around yet?
 

·
Registered
Joined
·
222 Posts
Nobody can help with this, or do I just need to wait until certain users have looked and they maybe haven't been around yet?
If your pictures are correct you have a Flytouch 2 as there are two external tf slots. Also it looks like there is only 256MB RAM fitted. As it appears to be 2.2 it would be one of the later FT2's as the early ones had 2.1 installed. None of the firmware on this forum will work. I suggest you take a look around a Flytouch 2 forum and see if you can spot any similarities with your info.
 

·
Registered
Joined
·
8 Posts
Thanks very much for your reply!

I have looked around all the popular forums, and none of them have anything similar to mine listed by anyone. Yes, those are the correct images, I took them myself the other day! I was thinking flytouch II as well, or superpad 2/flytouch 3, but the yonespad10 and wwe10 throw me off because no one has those some wwe10 yes, but no one with yonespad10, and then the Sawee (not 10) further adds to the mess. Sawee threads all lead to sawee10 threads, wwe10 leads to many various pad threads, and yonespad10 leads to app downloads only. I searched for just the infoTMIC number by itself too, no luck there either. So it really seems like I'm the ONLY one with this exact pad, at least the only one posting info about it and searching around.

So that's why I started asking for others thoughts, there's just too much contradicting information in the overall system info for me to be sure. I guess my guess would be the same as anyone elses? It could maybe be flashed with flytouch II, wwe10, sawee, ect
Ohh, which to try first I guess.

Well thanks for the replies, I suppose I'll go ahead and post this info all around the various sites and see if anyone would be willing to take a guess with me


Would it be ok with the forum mods here if I copied my original post into the Flytouch II and Flytouch 3 sections of this forum? Or should I wait for a few more replies here, then ask for it to be moved?
 
1 - 4 of 4 Posts
Top