Android Tablets Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
205 Posts
Discussion Starter · #1 ·
Hi folks, pretty simple thread. I want to know if anyone of you have tried to boot debian over a Sd card on the gome flytouch.I've tried following the instruction to doing so on an eken m001, but i end up in failure.Share your experiences, since the flytouch is 256mb ram and it shoul be pretty enough to run a GDE.
 

·
Registered
Joined
·
25 Posts
I have successfully boot debian Eken M001 on my flytouch, however, no touchscreen yet. Yes it responded quickly with the stock WM (fluxbox?), The process is simple,(from some linux console) dd if=debian_m001 of=/dev/mmcblk0, wait for some minutes coz this is a gig file, and then plug the sdcard into the pad, and boot from there. I've tried to modified the scriptcmd, but no luck for touch, coz I think it's a driver problem, not configuration... No further experiment, coz my flytouch is now RIP, still finding some hw reset to be able to boot from SD
 

·
Registered
Joined
·
15 Posts
Hi, I was able to boot but the touchscreen was inverted vertical and I was not able to fix it. Here is my post about that:slatedroid.com/android-tablet-os-discussion/5341-linux-gome-flytouch.html
 

·
Registered
Joined
·
25 Posts
[quote name='JJKelas;46087]Hi' date=' I was able to boot but the touchscreen was inverted vertical and I was not able to fix it. Here is my post about [URL=that:slatedroid.com/android-tablet-os-discussion/5341-linux-gome-flytouch]that:slatedroid.com/android-tablet-os-discussion/5341-linux-gome-flytouch[/URL].html[/QUOTE'] Have you tried to tweak the scriptcmd params?
 
1 - 4 of 4 Posts
Top