Android Tablets Forum banner
1 - 20 of 27 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
I took my epad apart and did some research. I was able to figure out some of the pieces parts. This information really isn't important unless you are playing around with building roms. I've also included links where you can get more info or download drivers:ralink rt02070 - wireless chipsetsite - Ralink corp. | Homedriver - Index of /Wireless Drivershynix hy5ps1g831c - memory ddr2 site - Hynixvia vt6113 - lan driver site - VIA Velocity VT6132 Gigabit Ethernet Controllers - VIA Technologies, Inc.samsung k9gag08u0m - flash memorye-king international limited ek070tn92 - touch screensite - E-KING INTERNATIONALsonix - pc cam - I'm having a hard time reading the chip but I got this muchsite - Sonix Technology Co., Ltd.
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #3 ·
I'm having some issues finding the battery maker. The information on the battery doesn't seem to make any manufacturer. I tried several variations without success. I'll try again later today to find a match.
 

·
Registered
Joined
·
143 Posts

·
Registered
Joined
·
6 Posts
My battery life sucks on this device. I get maybe an hour of use out of a full charge and that is with the screen half-dimmed. I am using wi-fi, but isn't that the point? Its portability and usefulness goes way way down with the existing battery. Is there a better quality, higher mAh battery that fits in this device or is an external all that will help this?
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #7 ·
You should be able to find one on ebay, do a search on "sonix webcam". It appears that the HP branded ones ( really sonix ) should work for you. Heck they may be an improvement over the factory one.
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #8 ·

·
Registered
Joined
·
143 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #14 ·
That webcam appears to be an exact replacement for the unit in my epad. The connection and holes looked to match perfectly with mine. Hate to say it but you might have to pull your tablet apart and check it out. I really don't know how many epad variations are out there. Let me take a picture of mine and post it so that you can compare mine with the one I found on ebay. I won't be able to do this until tonight when I get off work.
 

·
Registered
Joined
·
143 Posts
imprezza86;45607 said:
That webcam appears to be an exact replacement for the unit in my epad. The connection and holes looked to match perfectly with mine. Hate to say it but you might have to pull your tablet apart and check it out. I really don't know how many epad variations are out there. Let me take a picture of mine and post it so that you can compare mine with the one I found on ebay. I won't be able to do this until tonight when I get off work.
I look forward to it. The existing camera is a POS IMO and if the software will handle it an upgrade to 1.3mp can't be anything but good.
 

·
Registered
Joined
·
143 Posts
Labovski;48049 said:
What kind of software have you used for the webcam? I have tried both Fring and Sipdroid but I can't get a video image running. The apps work fine otherwise.
What ROM are you using? Webcam and camcorder work as installed in 1.9_88 (although the 0.3mb camera quality is horrible!).
 

·
Premium Member
Joined
·
362 Posts
fV46OEZTCN4S;48106 said:
What ROM are you using? Webcam and camcorder work as installed in 1.9_88 (although the 0.3mb camera quality is horrible!).
I've got a M70003 with a 1.3 Megapixel camera. Camera quality is ok but no program (Fring, Sipdroid, eBuddy) will run it.
 
1 - 20 of 27 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top