Android Tablets Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
22 Posts
Discussion Starter · #1 ·
I, yesterday y flashed my E7001 without a problem, in the afternoon the battery device has on 15% and work too slow and then i power off, the thing is that now the device not power on, and the PC doesn't detect, i dont understand what going on!!can anybody help me to do it?Best Regards
 

·
Registered
Joined
·
324 Posts
Did you try these steps?[quote author=Mikeami link=topic=601.msg4988#msg4988 date=1275657121](Thanks to Willow for the initial instructions that I have expanded on)Please note before you start, that I tried this on a Windows 7 and also Vista pc and it failed to install the drivers. It also failed at the install point on an old XP machine that only had usb 1.0 ports. So you will need Windows XP with usb 2.0. ( also remember what your 'Settings' icon in android looks like, you will need this later)1a. Download the custom firmware. I used Willows at http://slatedroid.com/index.php?action=downloads;sa=view;down=29 1b. Extract custom firmware (it's a zip file, so unzip it)2a. Power off Apad, by holding the front button for three seconds till the shutdown screen pops up. Select shut down (it might say power down). 2b. Wait for shutdown to complete. Switching the toggle switch too off, then put it back to the on position.3. While the device is still off, hold down the menu key (it's the left side of the button on the top if your holding it landscape) and plug the device into your computer via the lower usb port (again, if your holding it landscape) you will keep holding it till 4c4a. keep a hold on the menu button, Windows will ask you for drivers for this unknown usb device4b. Navigate it too the rk28usb-new folder in the update you unzipped earlier, this should install the device drivers.4c. once Windows recognizes the device, you can release the menu key.5. run RKandroidDM.exe found in the RKAndroidTool folder of the folder you unzipped. It should say Device found! (if it does not, repeat steps 3 and 4c6 click on the box next too the "New firmware Information" box and browse to the folder you unzipped, into the 'rockdev' folder and into the 'Image' folder there, you should find 'update' file.7. click the 'update' button and wait. It will take about 5 minutes to flash the new rom onto your device, once done a message on windows xp will indicate success, and your aPad will automatically start to boot to the new firmware, You can unplug the usb cable at this time. The initial boot takes much longer than usual (about 8 minutes) so just be patient.8. It will prompt you to calibrate the screen, do so.9. Everything will be in Chinese, so go to 'Settings' and scroll down to the 7th item in the list and click on it, then click on the first iten in that window, next select English. Now install whatever apps you want on your Android.[/quote]
 

·
Registered
Joined
·
22 Posts
Discussion Starter · #3 ·
thaks, but yesterday flashed the device and work perfect, the problem is now, cause the same pc with win xp, doesn't recognize the device.how can i force the process to recognice for flash again the device?Best Regards
 
1 - 4 of 4 Posts
Top