[Nagasaki]

Hi all, really need some help here.I have got 2 tablets/slates hereOne is a MID M70003 with an VIA WM8505 and the other is a Gnome Flytouch also with a VIA WM8505Now, the M70003 came this morning and did work but then stoped and would not boot anymore.I have tried a few diffrent firmwares for this one but they either wont install (device just hangs at boot logo) or they will install but the screen/buttons wont work.The flytouch worked fine untill i tried to get root on it and installed a rooted firmware. Now the touch screen did not work so i could not use it. there is other firmwares i can get on it but the screen still wont work. I do have a firmware that i know does work fine but it hangs at boot and wont allow me to install it. Just the same as the M70003 is doing.Hope someone can help me out.ThanksNaga

 

[Nagasaki]

Ok, ive got this firmware installedIndex of /xaueious/VIAWM8505/Gome%20Flytouch/1.8.2_2010.07.15/and its working fine but its all in chinese :| so i cant read anything.I want to get the Slatedroid1.3-flytouch-editionscript-v2 working on it again as it was working before. Now as i said it wont install. Pad just sits at boot screen and wont load anything.

 

[xaueious]

Something like this

 

[Nagasaki]

Yeah thanks. I got the lang sorted but the wireless wont work..but i still cant see why the slatedroid1.3 firmware wont install anymore.Anyone know why???

 

[i3G]

I think the problem is your trying to install firmware for the wrong device. Most of these rom are for the eken.

 

[Nagasaki]

Well as i said it worked before, and after testing other firmwares that dont work right i wanted to go back to it but it would not install