Android Tablets Forum banner
Cancel

Firmware & Development

2161 Views 20 Replies 18 Participants Last post by  BiggMikey2323, 
A
Why are the Firmware & Development forum and others at the bottom of the list, unavailable?
When I try to access them, I get this error, "[#103139] You do not have permission to view this forum.".

Jammer
Reply
Save
Like
1 - 20 of 21 Posts
Reimar
Could you please provide a screen shot of the forums you didn't have access too? After you post them, I'll check avaibility and permissions.

Thanks.
Reply
Save
Like
A
Reimar said:
Could you please provide a screen shot of the forums you didn't have access too? After you post them, I'll check availability and permissions.

Thanks.
Click to expand...
Here's the screenshot of the error:
http://i146.photobucket.com/albums/r263/ABQ_Jammer/SlateDroid/SlateDroid-Firmware-Error_zpsec629fb7.png

Here's the image showing where I was trying to go (on the bottom right side):
http://i146.photobucket.com/albums/r263/ABQ_Jammer/SlateDroid/SlateDroid-Firmware-Error2_zps148bbed7.png

Thanks.

Jammer
Reply
Save
Like
mrsburnout
2
ABQ_Jammer said:
Why are the Firmware & Development forum and others at the bottom of the list, unavailable?
When I try to access them, I get this error, "[#103139] You do not have permission to view this forum.".

Jammer
Click to expand...
Those forums do not have any posts so you may not see them. I am surprised they even show up in that list you used to access them.


Will remove them today. Thanks for noticing.

Regards,
Mrsburnout
See less See more
Reply
Save
Like
A
Reimar said:
Could you please provide a screen shot of the forums you didn't have access too? After you post them, I'll check availability and permissions.

Thanks.
Click to expand...
Here's the screenshot of the error:
http://i146.photobucket.com/albums/r263/ABQ_Jammer/SlateDroid/SlateDroid-Firmware-Error_zpsec629fb7.png

Here's the image showing where I was trying to go (on the bottom right side):
http://i146.photobucket.com/albums/r263/ABQ_Jammer/SlateDroid/SlateDroid-Firmware-Error2_zps148bbed7.png

Thanks.

Jammer
Reply
Save
Like
mrsburnout
ABQ_Jammer said:
Here's the screenshot of the error:
http://i146.photobucket.com/albums/r263/ABQ_Jammer/SlateDroid/SlateDroid-Firmware-Error_zpsec629fb7.png

Here's the image showing where I was trying to go (on the bottom right side):
http://i146.photobucket.com/albums/r263/ABQ_Jammer/SlateDroid/SlateDroid-Firmware-Error2_zps148bbed7.png

Thanks.

Jammer
Click to expand...
Please post a link and current screenshot if you can still see those forums in that list.

Thanks
See less See more
Reply
Save
Like
A
I need help,
i don´t have a linux computer so can someone copy a file from one system.img to another.

this is the original system.img

this is the custom system.img

I just need you to copy the file: etc/wifi/wpa_supplicant.conf
from the original to the custom

Can someone do this for me?

this system file is from a rom of a ZIPY MID FUN, RK2818, 5" screen, 2.1 android
the custom rom is a 2.2.1 android and works very well except with an error on wifi

if someone want´s i can share a link with the complete rom´s
See less See more
Reply
Save
Like
S
Does anyone have a good windows program to PULL the firmware from a Polaroid A/S 10 tablet..

Tablet Specs:

Model number: A/S10

SOC Chip: Super dual core A20

Android version: 4.2.2

Kernel version: 1.0.0

Build number: AS10-20130827

Any help would be appreciated...not new to computers, just new to dealing with android.

Thanks in advance!

SSGRichDAV
See less See more
Reply
Save
Like
  • Like
Reactions: 1
Mp4
is the tablet rooted ?, if so you can use titanium backup

of course thats the easy answer
Reply
Save
Like
S
I recently got a trio android tablet as a gift unfortunately the camera stopped working can anyone assist as to how to get this back up and running?
Reply
Save
Like
D
[email protected] said:
Does anyone have a good windows program to PULL the firmware from a Polaroid A/S 10 tablet..

Tablet Specs:

Model number: A/S10

SOC Chip: Super dual core A20

Android version: 4.2.2

Kernel version: 1.0.0

Build number: AS10-20130827

Any help would be appreciated...not new to computers, just new to dealing with android.

Thanks in advance!

SSGRichDAV
Click to expand...
Go to freaktab.com and search CS918S or Allwinner TV Boxes. There is a decompiler there
Reply
Save
Like
A
It's very cheap according to Turkey :)
Reply
Save
Like
S
I have a nobis 9 tablet , I'm not new to custom roms but this tab gave me a headache for drivers and roms are unavailable, even cyanogenmod doesn't support it
Reply
Save
Like
J
hello evryone

can you pls guide me where can i download the flashing tool for this kind of cpu "AML8726-MX"

and also the rom :)

heres my board id: EM_M62_v2.1

pls help me to find flash tool for this kind of cpu "AML8726-MX"

thanks in advance
Reply
Save
Like
S
This work just on this version of tablet?
Reply
Save
Like
C
I just received this as a gift, Social Security isn't much so I have to make due :

Cruz R101

Model sec_smdk6410

Firmware Ver: Eclair

Kernel Ver: 2.6.29 #125

Build No: secsmdk6410-engEclaireng.root 20101012.091257

Is this so outdated that there is not a firmware version (custom rom) to allow me to get apps, and hulu ect; ?
See less See more
Reply
Save
Like
A
can i asking about blackberry ?
Reply
Save
Like
T
Hello, I would like to install on the tablet Cyanogenmod AINOL NOVO 10 HERO 20130308v1 my son because it bugue all the time with the Chinese official version thank you in advance for your help cordially.
Reply
Save
Like
J
Hi there, Just got hold of a ZTPad Cortex A9 that only displays the ZTPad logo on start up. I guess that needs a SD card containing correct update/flash files, is it possible to still obtain this archive no that ZTPad site is no longer active?

Thanks in advance, AJ
Reply
Save
Like
H
PLEASE YOU HELP ME ABOUT SOFTWARE

1. The first, I had used software RK29xxImageTools_v2.1.zip . And I made a file wendal_new.img

2. After, i used software Rockchip firmware factory tool build wendal_new.img.

3. After software had unpacked firmware finish. I clicked Unpack firmware --> OK --> Read init.rc fail

But it had notifyed Read init.rc fail .

I don't know it error.

Please you help me.

Thank.

video :

Attachments

See less See more
Reply
Save
Like
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Android Tablets Forum
A forum community dedicated to Android Tablet owners and enthusiasts. Come join the discussion about collections, troubleshooting, displays, models, styles, reviews, software, hardware accessories, classifieds, and more!
Full Forum Listing
Explore Our Forums
Off Topic Lounge What Tablet Have I Got? Android Tablet OS Apps Member Classifieds Site Help and Suggestions
Top