Android Tablets Forum banner
1 - 20 of 121 Posts

·
Registered
Joined
·
53 Posts
Ok after problems with market finally i can dowload app's without hang on download.Al the info i found on this forum. I will try to explain what i all did , because the thread i found was only for the Pandigital : http://www.slatedroid.com/showthread.php/3347-Ugly-hack-to-working-markethere are the steps i take (also described in the thread) with some comment's.Happy reading . . . Intro The problem with market is i suppose that all the eken devices have the same AndroidID , so the solution is to change the androidID with a unique ID.Part I - Get a unique AndroidID1 - Download the android SDK and install it. ( you can follow directions on http://www.howtogeek.com/howto/2183...le-android-on-your-pc-without-buying-a-phone/)2 - Download android system.img from http://www.4shared.com/file/165624746/fc72c3ed/system.html ( hey , you have some time now before downloading starts , so take some coffee )3 - place the system.img file to c:android-sdk-windowsplatformsandroid-4images (or location where you installed tje sdk)4 - Now start the android emulator again and start the virtual dev for 1.6 .( c:android-sdk-windowsSDK setup.exe )5 - Start up the emulator and sign in to market ( first skip all until you see your dashboard , then market)6 - If you have open your market and you can browsing thru the program's , it's time to open a command prompt.7 - go to c:android-sdk-windowstools ( cd c:android-sdk-windowstools)8 - type follow command : adb devices ( now you see the emulator connected)9 - type follow command : adb pull /data/data/com.google.android.googleapps/databases/accounts.db ( now we copy the file with the unique androidid to directory)10 - type follow command : sqlite3 accounts.db "select * from meta";now you have a return like androidId||xxxxxxxxxxxxxxxxxx where the x's = the unique androidid , write this number down.You can close the emulator for now .So this is End of Part IPart II : Get Root access to your eken device.For some command (like copy files . . .) on our eken device we need some root access. Company eken has disabbled this , but with some tricks i found on this board ( http://www.slatedroid.com/showthread.php/2004-Root-on-1.7.4/page2 ) we can get root access. I have already changed the eken M002 Firmware for you and you can find it here for the Firmware : http://www.megaupload.com/?d=3705887Yhere for the 2 APK tools :http://www.megaupload.com/?d=R7UIBYPYI hope you can Flash your device with the Firmware and after that install the 2 apk with pkmanager. all the other info you find in the howto.txt. Normally it's the easiest part.Part III : Change the " Fault" androidid with your unique. 1 - on your device : Settings - Applications - Development - Tap USB debugging 2 - go to market , sign in and close 3 - go to c:android-sdk-windowstools ( cd c:android-sdk-windowstools) 4 - connect with your device , the easiest way is type : adb connect <ip of your device>:5555 5 - type : adb devices ( to see if your device is connected) 6 - type : adb shell (now you are in your device) now you have to change some attributes from a file7 - type : su (to get super user privileges)8- look at the screen of your device , you have to tapped allow.9 - type : cd /data/data/com.google.android.googleapps/databases/10 - type : chmod 777 accounts.db11 - type : exit12 - type : exit (yes , 2 times)13 - type : adb pull /data/data/com.google.android.googleapps/databases/accounts.db (get the file with fault id )14 - type : sqlite3 accounts.db "update meta set intvalue='xxxxxxxxxxxxxxxxxxx' where name='androidId'" ( ATTENTION change the x's with the number you have written) 15 - type : adb push accounts.db /data/data/com.google.android.googleapps/databases/16 - Reboot your devicePart IVTest your Market , normally it's works.I hope it works with the above instructions, if you have some questions , please ask them here , i'll try to help where i can.Helmut:)
 

·
Registered
Joined
·
4 Posts
Needs some extra inverted commas around the sql command for this:sqlite3 accounts.db "update meta set intvalue='xxxxxxxxxxxxxxxxxxx' where name='androidId'"
 

·
Registered
Joined
·
53 Posts
Did you have enabled on your device : applications -->development --> usb... ???Do you have a IP adress of your devicedid you have make connection to your device like : adb connect xxx.xxx.xxx.xxx:5555 ???? (where xxx = ip adress ???)Wich step you've been stuck ???
 

·
Registered
Joined
·
646 Posts
helmuteke;25715]Ok after problems with market finally i can dowload app said:
http://www.slatedroid.com/showthread.php/3347-Ugly-hack-to-working-market[/URL]here are the steps i take (also described in the thread) with some comment's.Happy reading . . . Intro The problem with market is i suppose that all the eken devices have the same AndroidID , so the solution is to change the androidID with a unique ID.Part I - Get a unique AndroidID1 - Download the android SDK and install it. ( you can follow directions on http://www.howtogeek.com/howto/2183...le-android-on-your-pc-without-buying-a-phone/)2 - Download android system.img from http://www.4shared.com/file/165624746/fc72c3ed/system.html ( hey , you have some time now before downloading starts , so take some coffee )3 - place the system.img file to c:android-sdk-windowsplatformsandroid-4images (or location where you installed tje sdk)4 - Now start the android emulator again and start the virtual dev for 1.6 .( c:android-sdk-windowsSDK setup.exe )5 - Start up the emulator and sign in to market ( first skip all until you see your dashboard , then market)6 - If you have open your market and you can browsing thru the program's , it's time to open a command prompt.7 - go to c:android-sdk-windowstools ( cd c:android-sdk-windowstools)8 - type follow command : adb devices ( now you see the emulator connected)9 - type follow command : adb pull /data/data/com.google.android.googleapps/databases/accounts.db ( now we copy the file with the unique androidid to directory)10 - type follow command : sqlite3 accounts.db "select * from meta";now you have a return like androidId||xxxxxxxxxxxxxxxxxx where the x's = the unique androidid , write this number down.You can close the emulator for now .So this is End of Part IPart II : Get Root access to your eken device.For some command (like copy files . . .) on our eken device we need some root access. Company eken has disabbled this , but with some tricks i found on this board ( http://www.slatedroid.com/showthread.php/2004-Root-on-1.7.4/page2 ) we can get root access. I have already changed the eken M002 Firmware for you and you can find it here for the Firmware : http://www.megaupload.com/?d=3705887Yhere for the 2 APK tools :http://www.megaupload.com/?d=R7UIBYPYI hope you can Flash your device with the Firmware and after that install the 2 apk with pkmanager. all the other info you find in the howto.txt. Normally it's the easiest part.Part III : Change the " Fault" androidid with your unique. 1 - on your device : Settings - Applications - Development - Tap USB debugging 2 - go to market , sign in and close 3 - go to c:android-sdk-windowstools ( cd c:android-sdk-windowstools) 4 - connect with your device , the easiest way is type : adb connect <ip of your device>:5555 5 - type : adb devices ( to see if your device is connected) 6 - type : adb shell (now you are in your device) now you have to change some attributes from a file7 - type : su (to get super user privileges)8- look at the screen of your device , you have to tapped allow.9 - type : cd /data/data/com.google.android.googleapps/databases/10 - type : chmod 777 accounts.db11 - type : exit12 - type : exit (yes , 2 times)13 - type : adb pull /data/data/com.google.android.googleapps/databases/accounts.db (get the file with fault id )14 - type : sqlite3 accounts.db "update meta set intvalue='xxxxxxxxxxxxxxxxxxx' where name='androidId'" ( ATTENTION change the x's with the number you have written) 15 - type : adb push accounts.db /data/data/com.google.android.googleapps/databases/16 - Reboot your devicePart IVTest your Market , normally it's works.I hope it works with the above instructions, if you have some questions , please ask them here , i'll try to help where i can.Helmut:)
You are going to get +1 in Rep because this is freaking working on my M001!You are the man!Thank you very much
 

·
Registered
Joined
·
646 Posts
helmuteke;26381 said:
Did you have enabled on your device : applications -->development --> usb... ???Do you have a IP adress of your devicedid you have make connection to your device like : adb connect xxx.xxx.xxx.xxx:5555 ???? (where xxx = ip adress ???)Wich step you've been stuck ???
works,works,works!YEAH!Thank you
 

·
Premium Member
Joined
·
334 Posts
I can also verify that this works on my M003. Very nice work!
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #9 ·
donaldson;26623 said:
I can also verify that this works on my M003. Very nice work!
Donaldson , did you use the firmware i posted ?? or other to get SU ??? it's for helping other people with a M003
 

·
Registered
Joined
·
53 Posts
Discussion Starter · #10 ·
[quote name='enotar;26579]works' date='works,works!YEAH!Thank you[/QUOTE'] Enotar , did you use the firmware i posted ?? or other to get SU ??? it's for helping other people with a M001
 

·
Registered
Joined
·
646 Posts
[quote name='helmuteke;26681]Enotar ' date=' did you use the firmware i posted ?? or other to get SU ??? it's for helping other people with a M001[/QUOTE']I am using Ecotox 1.1.1 so it is root already, the only dificult part for me was to have ADB working but I succed wireless as it was not possible with USB cable, I had to go to my router status page to find out my IP but afterwards it was piece of cake with your explanation.Now if you know or someone else I have a ePad M70003 where I want to do the same thing but didnt succed rooting 1.7.4.Any idea?
 

·
Registered
Joined
·
4 Posts
this did not work for me i get stuck at5 - Start up the emulator and sign in to market ( first skip all until you see your dashboard , then market)there is no market for me to open :-( pls help i am ready to throw this brick in the trash its good for nothing
 

·
Registered
Joined
·
52 Posts
Hey there.I see this is kinda active. I have a question. Can anyone here help root the latest slatedroid 1.7.4 release? and get adhoc working for wifi? and get this above market working? It seems the dev is dead or something
 

·
Registered
Joined
·
205 Posts
I didnt managed to get it work on my flytouch with slatedroid fw. Cant get root acces and when i download the accounts.db from the device the file's empty so i cannot modify the id.If someone could help me it would be great.In anyway thank you very much for the data on this.... cheers!
 
1 - 20 of 121 Posts
Top