FAQ & wiki here-NEWBIES INFRACTIONS WILL ISSUE IF YOU DON'T READ AROUND B/F ASKING

65876 Views 129 Replies 41 Participants Last post by Mark Adams, Feb 26, 2011

lawman

Discussion Starter · Jul 14, 2010 (Edited by Moderator)

START WITH THE WIKI Introduction to the Pandigital Novel

Please don't make me start deleting, moving, and combining threads by asking whatever comes to mind. There's been a lot of recent development on this device, and a LOT of your questions will have been asked already here. Take 10 minutes and look around before posting a noob question. We love our noobs, but we love them more when they help unnoobing themselves...This has become an epidemic problem here, so now we're going to have to add teeth: look before you ask. If you really think you're the first person to ask about changing the internal micro sd card, or to have problems flashing the device, that means you didn't look, and I am going to issue you an infraction. I won't enjoy it, but it's for the good of the community.

Save

Reactions: 1

Status: Not open for further replies.

1 - 1 of 130 Posts

Lockrob2000

· #22 · Aug 9, 2010 (Edited by Moderator)

7. Change Line 33 (PSMode=) to PSMode=CAM

Code:

adb push ./RT2870STA.dat /system/etc/Wireless/RT2870STA/RT2870STA.dat

##you'll see a response in the CommandPrompt of "34 KB/s (0 bytes in 1092.000s"##You're Done.

OK- I did the suggested change, but when I ran the last bit of code, still got the same response as before. (68 KB/s...
Also, my line 33 had a value after the =, but I still changed it as suggested.)
What might be the issue? Any ideas? Thanks- (would it make any difference to rerun this code? making sure not to over write the original back-up?)

Save

1 - 1 of 130 Posts

Status: Not open for further replies.

Top Contributors this Month