[ontheair]

Hello everybody,my ePad was just working fine, then the following happened:The battery was low, so I connected the charger. But the green light switched NOT to red. The ePad was working, because it used the power from the charger to work, but the battery was not charged.One hour later, the display changed to full green. I was not able to do anything, the display was completely green. I startet the ePad again, and now the following happened:I can see the Slatedroid screen for 3 seconds, then strange moving lines are displayed and the device is not booting.The light is switching from green to red, back to green, back to red... fastly.Anybody know this behaviour? I have not changed anything in the software to make this happen.Thank you for your help!

 

[ontheair]

I found the solution: The AC adaptor is broken. Instead of 9V there is just around 4,5V. Trying another power source: Everything is perfect again.

 

[rubioflytouch]

Have I also happened to me, I called pandawill and I changed it.

 

[Gotcha]

I have this problem too, but it dont AC

 

[zolini]

I'm having a similar problem, but in my case the light is not green ... Just red.