Android Tablets Forum banner
41 - 50 of 50 Posts

·
Registered
Joined
·
6 Posts
Hi AndyCMX,

thanks for your informations. Do have the 9.7" Tablet CMX Aquila MID 097-1016, or the 8" Tablet CMX Aquila MID 080-1008?

It is possible for you, to run the AnTuTu benchmark v3.2.2 with your CM10.1 ROM? I'm really interested to compare, but for me a full test will take a lot of time...
With a screenshot app from the playstore, it's really easy to make jpegs


Here is my actual AnTuTu value for example.

Thanks,
melbar
hi

well now i know why this CMX 080-1008 8" was in the sale bin ...
The AntTuTu benchmark was 7699 cpu int 1376 3d graphics 1849 .. CPU 2 x 1200mhz
so I will complain to CMX Austria as on the box it says 2 x 1500mhz !
 

·
Registered
Joined
·
42 Posts
Hi,

thanks for the antutu results!

yes, the problem is, that with this entries in /system/build.prop file, the max. speed is 1200MHz,
as you can see in the FAQ's in the first page: http://www.slatedroid.com/topic/41510-rom-cyanogenmod-101-for-elf-ii-aurora-ii-crystal-flame-fire-2013-03-30/
You'll need to change the entries to get the 1512Mhz, but i don't know this will work with the CM10.1 kernel...
ChristianTroy said, when you clock it higher, there are more cons than pros, see: http://www.slatedroid.com/topic/41510-rom-cyanogenmod-101-for-elf-ii-aurora-ii-crystal-flame-fire-2013-03-30/page__st__1000
 

·
Registered
Joined
·
6 Posts
Hi,

thanks for the antutu results!

yes, the problem is, that with this entries in /system/build.prop file, the max. speed is 1200MHz,
as you can see in the FAQ's in the first page: http://www.slatedroid.com/topic/41510-rom-cyanogenmod-101-for-elf-ii-aurora-ii-crystal-flame-fire-2013-03-30/
You'll need to change the entries to get the 1512Mhz, but i don't know this will work with the CM10.1 kernel...
ChristianTroy said, when you clock it higher, there are more cons than pros, see: http://www.slatedroid.com/topic/41510-rom-cyanogenmod-101-for-elf-ii-aurora-ii-crystal-flame-fire-2013-03-30/page__st__1000
ok thx for the info.

now i read a few forums , increased my knowledge on this tablet and found other links to cmx 080 files i am playing around with 2 or 3 roms with confidence/safety seeing i can use cmw recovery as well if all goes pear shaped

currently trying official CMX 4.1.1 as i noticed the back camera wasnt working with CM10

Andy
 

·
Registered
Joined
·
60 Posts
This port is excellent! Got it running on my vi30 now with cwm recovery. No issues so far, battery drain is excellent compared to ondas stock ROMs!

Sent from my Nexus 7 using Tapatalk 4 Beta
 

·
Registered
Joined
·
381 Posts
Unzip and change file name "ulmage_recovery".
Put it in the external sd card.
Turn off device and press home key + power key
Check the version of cwm
Enjoy
I tried doing this but nothing happens, I just get the standard Onda recovery.
I am not using cm10.1, I have Onda v4.2.2 firmware installed and just want CWM
 

·
Registered
Joined
·
2 Posts
I've tried the above method with the newest 1/05 rom. Stuck on onda logo won't boot. Any idea what to do?..

Edit: switched another cwm file, worked. Commence testing :)

Is it normal for nova launcher to be slightly shrunk (default launcher was out of screen as op said)and the soft keys to be squished in the middle?
Sorry, not complaining, would just like to know if normal :)
oij which CWM did you use then? I'm also stuck at the ONDA logo and can't go any further :/
 

·
Registered
Joined
·
1 Posts
Onda Vi30DC Compatibility Pack for Christian Troy's CM10.1 releases for Ainol Tablets

You can download his latest releases here
CM10.1 for Ainol ElfII, Aurora II etc.

Follow the update instructions on his thread using this CWM
attachicon.gif
cwm-5.5.0.4.zip

As the last flash the attached onda comp zip
attachicon.gif
onda-cm10.1-compatibility-1.0.zip

Issues:
- Trebuchet Desktop too wide in horizontal orientation (Nova is ok)
- Graphical Distortions on tablet display when using HDMI
verry helpful
 
41 - 50 of 50 Posts
Top