Android Tablets Forum banner
301 - 320 of 355 Posts

·
Registered
Joined
·
148 Posts
Why my PC cant see my tab running AOKP? Any solution? Nothing happens after connecting (only charging)
If you only want to see your tab's internal or external sd as usb storage for file transfer
you can also do it from the menu MOUNT of TWRP RECOVERY...

BTW- Great rom is Paranoid Android3+. I am so happy I have stable(without multiuser) fast Android 4.2.2. Latest possible!- Android version history of 15th feb shows only 1.4% of Android devices using it-wow! Thanks, Christian!
 

·
Registered
Joined
·
36 Posts
If you only want to see your tab's internal or external sd as usb storage for file transfer
you can also do it from the menu MOUNT of TWRP RECOVERY...
Yes. I know that but this is not what I want
 

·
Registered
Joined
·
6,731 Posts
I was thinking of putting something up my ass to clean streets while I walk around...
Do you have any idea of how many hours if work I already put in there?
And how much costs the ac for every build when the PC is running with full cores at 100%?
 

·
Premium Member
Joined
·
1,026 Posts
He's right you know. If he tried to put another ROM or two on his plate it will become a full time job and then some. I would be glad to pay him the money to devote some time to making these ROMs, but I just don't see the benefit of them over the CM or PA builds.
 

·
Registered
Joined
·
104 Posts
I flash pa whit multi user today and gsensor did't work

crystal batch 2

pa(last updat)+multi user+crystal 2nd batch multi user

I try cm10.1 and no problem on that
 

·
Registered
Joined
·
6,731 Posts
Discussion Starter · #309 ·
i forgot to replace sensor hal, download it again in a few minutes
 

·
Registered
Joined
·
6,731 Posts
Discussion Starter · #312 ·
You can never have ums with the unified partition layout. Just like in nexus devices. Use mtp
 

·
Registered
Joined
·
49 Posts
@Christian Troy

I'm a bit confused about whenever you have access to kernel source or not. It's seems you can compile the ELF kernel though. So, might it be possible for you, to add some Webcam Modules to the comp zip? It's like this, I have got a cheap uvcvideo based webcam here and I was thinking about using it with the Ainol Tablet as substitute 2nd Camera but it isn't recognised.
 

·
Registered
Joined
·
6,731 Posts
Discussion Starter · #316 ·
you can't just add modules you have to write an HAL for the new camera or android would never use it (and be aware of it)
 

·
Registered
Joined
·
148 Posts
I get not enough space when trying to install any app, although there are more than 400 mb free. On PA multi user. Clearing cache and dalvik doesn't help...Deleting big apps deoesn't help, no odex files in data, reflashing rom without whipe doesn't help....
 

·
Registered
Joined
·
2 Posts
I have reported in other thread that CN doesn't play rtsp streams on my Aniol Crystal (batch 3).

After applying older version of media libraries, it plays some rtsp streams, but not in 720p, just lower.

Now I have tested PA and it doesn't play any rtsp streams as well, same as in CN. Could the problem be in the compatibility pack?
 

·
Registered
Joined
·
1 Posts
Hi all!
I have trouble with wifi: it does not turn on.
Logcat:
03-17 23:03:24.720 3592 4078 D WifiService: setWifiEnabled: true pid=5089, uid=1000

03-17 23:03:24.740 3592 7695 D WifiHW : Start to insmod 8188eu.ko

03-17 23:03:24.740 3838 3838 D BluetoothAdapter: 1091793256: getState() : mService = null. Returning STATE_OFF

03-17 23:03:24.760 5089 5089 D BluetoothAdapter: 1089563336: getState() : mService = null. Returning STATE_OFF

03-17 23:03:25.420 3592 3650 E InputDispatcher: Motion event has invalid action code 0xa

03-17 23:03:25.480 3592 7695 D WifiHW : failed to read proc/net/wireless

03-17 23:03:25.480 3592 7695 D WifiHW : loading wifi driver...

03-17 23:03:35.920 3592 7695 E WifiHW : timeout, register netdevice wlan0 failed.

03-17 23:03:35.940 3592 7695 E WifiStateMachine: Failed to load driver!

03-17 23:03:35.950 3592 3757 E WifiStateMachine: DriverFailedState

03-17 23:03:35.950 3838 3838 D BluetoothAdapter: 1091793256: getState() : mService = null. Returning STATE_OFF

03-17 23:03:35.970 5089 5089 D BluetoothAdapter: 1089563336: getState() : mService = null. Returning STATE_OFF
also i tried to use dmesg:
<6>[ [email protected]] usb_wifi_power Off
<6>[ [email protected]] usb_wifi_power On
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<6>[ [email protected]] usb 2-1: new full speed USB device number 22 using dwc_otg
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<4>[ [email protected]] rtl8188eu driver version=v4.1.1_4235.20120606
<4>[ [email protected]] build time: Sep 28 2012 14:05:17
<4>[ [email protected]] ##########rtw_suspend_lock_init ###########
<6>[ [email protected]] usbcore: registered new interface driver rtl8188eu
<3>[ [email protected]] usb 2-1: device descriptor read/64, error -71
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<3>[ [email protected]] usb 2-1: device descriptor read/64, error -71
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<6>[ [email protected]] usb 2-1: new full speed USB device number 23 using dwc_otg
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<3>[ [email protected]] usb 2-1: device descriptor read/64, error -71
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<3>[ [email protected]] usb 2-1: device descriptor read/64, error -71
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<6>[ [email protected]] usb 2-1: new full speed USB device number 24 using dwc_otg
<3>[ [email protected]] usb 2-1: device not accepting address 24, error -71
<4>[ [email protected]] Indeed it is in host mode hprt0 = 00021501
<6>[ [email protected]] usb 2-1: new full speed USB device number 25 using dwc_otg
<3>[ [email protected]] usb 2-1: device not accepting address 25, error -71
<3>[ [email protected]] hub 2-0:1.0: unable to enumerate USB device on port 1
<4>[ [email protected]] set voltage to 1107000; selector=8
<4>[ [email protected]] set voltage to 1182000; selector=5
<4>[ [email protected]] set voltage to 1032000; selector=11
<4>[ [email protected]] set voltage to 1182000; selector=5
<4>[ [email protected]] set voltage to 1107000; selector=8
<4>[ [email protected]] set voltage to 1182000; selector=5
<4>[ [email protected]] set voltage to 1107000; selector=8
<4>[ [email protected]] set voltage to 1182000; selector=5
<4>[ [email protected]] set voltage to 1032000; selector=11
<4>[ [email protected]] set voltage to 1182000; selector=5
<4>[ [email protected]] +rtw_drv_halt
<4>[ [email protected]] ##########rtw_suspend_lock_uninit###########
<6>[ [email protected]] usbcore: deregistering interface driver rtl8188eu
<4>[ [email protected]] -rtw_drv_halt
<6>[ [email protected]] usb_wifi_power Off
I have Ainol novo7 crystal Batch 1.
 
301 - 320 of 355 Posts
Top