Android Tablets Forum banner
1 - 20 of 368 Posts

·
Registered
Joined
·
6,731 Posts
If you appreciate my work and would like to support me with a small donation you can click on btn_donate_SM.gif button.
If every happy user of this rom would just donate something I could invest more time in all these Android projects.

Issues and possible workarounds

* HDMI out doesn't work. Actions uses two hwcomposer modules, I don't know why, maybe because even they don't have access to Vivante's hwc source code, anyway to have HDMI working you need both modules. With 4.3 the two hwc modules races each other so you I can load only one of them. If (and when) a stock 4.3 will be available (both hwc HALs come as binary blobs) this will probably be fixed, in the meantime in the next days I'll see if it can be worked around in some way.

Extra features

* Xbox 360 gamepad support (xpad)
* Generic / chinese (Pantherlord / GreenAsia) gamepads support (hid-pl and hid-gaff)
* Veno congestion control algorithm
* USB bluetooth (It supports only CSR devices, they can be identified typing "lsusb" from an app like "terminal emulator": the supported device will be present with an entry like "Bus 001 Device 002: ID 0a12:0001" ("0a12:0001" is the supported VID:pID). Do not boot with the bluetooth plugged in; plug it once you booted to android.)

Instructions

* You need TWRP to be able to flash this rom. Read the linked thread for instructions.
* Put rom (cm-10.2-$DATE-UNOFFICIAL-gs702a.zip), gapps (gapps-jb-$DATE-signed.zip) and compatibility zip on internal memory or external sdcard.
* Turn on the tablet in recovery mode as explained in TWRP thread.
* If this is your first install select "Factory reset" from "Wipe" menu.
* Flash rom (cm-10.2-$DATE-UNOFFICIAL-gs702a.zip), gapps (gapps-jb-$DATE-signed.zip) and the required compatibility zip.
* Now select "Reboot".
* Enjoy CyanogenMod 10.2!

Changelog & download links

2013-11-30

* Updated upstream sources

ROM (md5sum)
Gapps ( mirror )

Compatibility zips

Next to comp zip's download link you will find the name of the stock ROM you must flash before to match the required kernel modules (it's based on the file name of the stock rom I used to grab the included kernel).

* Ainol Venus rc1 (2013-05-23-V1-4.2)
* Ainol Hero v1 rc1 (2013-05-21-V1-4.2)
* Ainol Hero v2 rc1 (2013-05-21-V2-4.2)
* Ainol Captain rc4 (20130820)
* Ainol Crystal II rc1 (4.2cris2)
* Ainol Discover rc2 (atm7029_AINOL_SDK0906_NOVO806_2013-9-27)

Third party compatibility zips

* Ainol Crystal II by cxz (TWRP) - Use this if you have a newer Crystal II (you will identify it because touch won't work using my twrp / comp zip)
( edit: Above link is dead. Here is just the touch fixer for all Crystal2s. Flash it after the comp zip. -cxz )

FAQs

* WiFi now can stay enabled with display turned off. Note that if WiFi is enabled the tablet won't enter deep sleep so if you're more interestead in battery life instead of an always on WiFi change policy (on "Advanced" WiFi settings) from "Always" to "Never" and select your preferred WiFi timeout.
* Internal memory is mounted at /storage/sdcard0, external sdcard is mounted at /storage/sdcard1. If you wanna swap them (and make primary your real microsd) just edit "persist.sys.vold.switchexternal=0" to "persist.sys.vold.switchexternal=1" in "/system/build.prop" file
* If you don't like the new feature that automatically triggers airplane mode when the display is turned off you can change "ro.disable_auto_airplane_mode=0" to "ro.disable_auto_airplane_mode=1" in /system/build.prop file.

Screenshots

ILIHoO6l.png
 

·
Registered
Joined
·
6,731 Posts
Old Changelog

2013-11-16

* Updated upstream sources

ROM (md5sum)

2013-11-09

* Updated upstream sources

ROM (md5sum)

2013-10-25

* Updated all comp zips
* Updated upstream sources

ROM (md5sum)

2013-10-18

* Updated upstream sources

ROM (md5sum)

2013-10-12

* Updated upstream sources

ROM (md5sum)

2013-10-06

* Disabled screen rotation animation so you won't get any random soft reboot caused by the older gralloc (you'll have a black screen for few milliseconds anyway)
* Updated upstream sources

ROM (md5sum)

2013-09-30

* First build

ROM (md5sum)
 

·
Registered
Joined
·
6,731 Posts
Discussion Starter · #4 ·
I just tested it on the Venus but should work on all the other devices. Was planning to try AOKP 4.3 on the discover (to try the comp zip) this afternoon but I'll be out working til night so maybe tomorrow I'll start working on it...
Merging stuff in a clean way is a nasty job that takes a tons of work the first time you do it but it's very portable accross similar branches
 

·
Registered
Joined
·
32 Posts
Thanks you Christian!
This is the best FW for gs702a!
 

·
Banned
Joined
·
6 Posts
Thank you I use the discovery and I had a problem with rum 10.1'm going to try this and come back to show you showed me any problems or not ..Thanks again for your work wonderful ..
 

·
Banned
Joined
·
6 Posts
not work with discover .. only your cm 10.1 rc1 worked whith me ..cm 10.1 rc3 and this 10.2 rc0 not work its frees on start screen and never go to bootanimation ..
thx for work .
 

·
Registered
Joined
·
80 Posts
not work with discover .. only your cm 10.1 rc1 worked whith me ..cm 10.1 rc3 and this 10.2 rc0 not work its frees on start screen and never go to bootanimation ..
thx for work .
Reinstall stock rom and start over. It works.

Sent from my GT-I9300 using Tapatalk 4
 

·
Registered
Joined
·
169 Posts
I just tested it on the Venus but should work on all the other devices. Was planning to try AOKP 4.3 on the discover (to try the comp zip) this afternoon but I'll be out working til night so maybe tomorrow I'll start working on it...
Merging stuff in a clean way is a nasty job that takes a tons of work the first time you do it but it's very portable accross similar branches
thank you you will be getting a donation from me soon just one quick ? is any of Ainol source code in your roms because they are working so well on our Actions devices
 

·
Registered
Joined
·
169 Posts
thank you you will be getting a donation from me soon just one quick ? is any of Ainol source code in your roms because they are working so well on our Actions devices
getting system reboots when using wall charger usb charging seams to work Ainol Novo Hero II ver.2
Charger working now guess rom needed to settle down I been using this charger since december with no problems.
 

·
Registered
Joined
·
6,731 Posts
Discussion Starter · #17 ·
getting system reboots when using wall charger usb charging seams to work Ainol Novo Hero II ver.2
the rom has nothing to do with charging, that stuff depends on kernel. I'd try another charger if I were you. Chinese one are pretty crappy and can give crazy voltages/amperages that will damange your unit (that's why it reboots)
 

·
Registered
Joined
·
6,731 Posts
Discussion Starter · #18 ·
* Ainol Crystal II rc1

it requires "atm7029_AINOL_SDK0906_NOVO102_2013-9-24" stock rom as base
 

·
Registered
Joined
·
9 Posts
Hi,
I did install this ROM at yesterday and I have noticed that my tablet crashes frequently now. Crash happens usually once or twice in hour (CM loading screen appears) when I'm using the device. I have reinstalled rom once and it didn`t help at all. Can you figure out what is the problem? My device is Ainol Novo 10 captain basic.
 

·
Banned
Joined
·
6 Posts
Thank you very much .. I have a problem in my discovery: When you use the camera app system has work reboot and after the conquest stopped and the user interface and continued it so I did the work of the wipe, but it repeats with the first restart of the system so I did re-flashing of the Software and rom but it's whatcontinues always gives me a message: stop the user interface of the system ..Is there a solution to this problem or refer the old rom?!
Thank you very much for your trouble.
 
1 - 20 of 368 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top