Android Tablets Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
75 Posts
https://docs.google.com/file/d/0B9yrDo9aNWXbSzVlZmQ0WUtvR00/edit?pli=1
Features:
- Based on stock 1.04.
- Pre-rooted.
- Chinese software removed.
- Launcher replaced with Nova, but unfortunately that Nova cannot be updated using Google Play.
- ScreenFilter, AdBlock and Quick Boot applications added.

Taken from http://4pda.ru/forum/index.php?showtopic=482025&view=findpost&p=24370080

Some other firmwares based on previous release:
kasty-cube_u39gt-422-104_20130723-rooted4 - Rooted firmware 4GB for apps, play market tweaks.

kasty-cube_u39gt-422-104_20130723-rooted4b - Same as above, but with other launcher.

kasty-cube_u39gt-422-106_20130928-rooted4 - based on 1.06.

ROM by vasil_d from arctablet - details in the post. As for me this firmware works not good - got two freezes with garbled screen - means overclocking is too high for memory.
 

· Registered
Joined
·
5 Posts
Tanks for this share, Frost.

I have 2 questions:

1) Is there any way to remove nova and go back to android stock after installation?

2) Before installing, should I install windows drivers once (by pluging the usb cable into my pc, tablet waked) AND THEN use the firmware update application and the boot mode, or is the boot mode will ask me to install the windows drivers? Well... not sure of being clear enough! Lol!

Envoyé depuis mon GT-N7100 avec Tapatalk 4
 

· Registered
Joined
·
75 Posts
Tanks for this share, Frost.

I have 2 questions:

1) Is there any way to remove nova and go back to android stock after installation?

2) Before installing, should I install windows drivers once (by pluging the usb cable into my pc, tablet waked) AND THEN use the firmware update application and the boot mode, or is the boot mode will ask me to install the windows drivers? Well... not sure of being clear enough! Lol!

Envoyé depuis mon GT-N7100 avec Tapatalk 4
1) I don't know, Nova works for me well, even without updates, so I haven't searched for ways to replace it completely.
2) The installation process is the same as for official firmware, I haven' remember exact steps, because had to reconnect the device several times to install that damn driver. I believe switching the tablet into flash mode initiates windows to ask for driver. Otherwise it is seen as mass storage device. As seen in this video, they are switching the tablet into flash mode by pressing power and volume up and then installing the driver.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top