Android Tablets Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
197 Posts
wow nice stand and it simple to diy at home!!! need only some plexyglass or wood very very thx start to design profile for stand .need any help for dimension (need only print on paper and see it is ok) because i don't have m001 china post don't register my package grrr....
 

· Registered
Joined
·
197 Posts
test with dvd..and cardboard stand..from this test i see need 2mm or more of palstic or wood whit cardboard is difficult to find equilibrium.but nice for see design are good.no it sta at ~45? i think it need much elevation Right?
 

· Registered
Joined
·
197 Posts

· Registered
Joined
·
197 Posts
[quote name='grillomalta;19750]I just used a piece of steel' date=' hammered into shape...like an inverted V with an upturned lip at one side. I then covered the steel with self-adhesive cloth...[/QUOTE'] post the photo of your result !
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top