Android Tablets Forum banner
1 - 16 of 16 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·

·
Premium Member
Joined
·
2,596 Posts
I would love people to post cheaper stands for the Slatedroids. I'm thinking of going to a art supply store and Lowes just see if we can find stands.
 

·
Registered
Joined
·
202 Posts
wow nice stand and it simple to diy at home!!! need only some plexyglass or wood very very thx start to design profile for stand .need any help for dimension (need only print on paper and see it is ok) because i don't have m001 china post don't register my package grrr....
 

·
Registered
Joined
·
202 Posts
test with dvd..and cardboard stand..from this test i see need 2mm or more of palstic or wood whit cardboard is difficult to find equilibrium.but nice for see design are good.no it sta at ~45? i think it need much elevation Right?
 

·
Premium Member
Joined
·
2,596 Posts
thanks great jobgonna try my own based off your template
 

·
Registered
Joined
·
202 Posts
[quote name='grillomalta;19750]I just used a piece of steel' date=' hammered into shape...like an inverted V with an upturned lip at one side. I then covered the steel with self-adhesive cloth...[/QUOTE'] post the photo of your result !
 

·
Registered
Joined
·
68 Posts
I just use one of those holders that are used to hold plates or those decorative dishes I had lying around.No need to burn money on it.At work, I used a cardboard box and duct tape to make a stand.A colleage once examined it curiously.
 

·
Registered
Joined
·
15 Posts
Discussion Starter · #15 ·
1 - 16 of 16 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top