I just got out my eken pluged it in and booted it up. when it was past the boot screen it turned off and the charger is blinking. I never really looked at what the charger did before so I don't know if this is normal. Also when I unplug the charger from the Eken the light on the charger stays on instead of blinking and either plugged in of not it won't turn on..... what could that be? is it my charger or my battery? and when I have it plugged in none of the lights on the Eken come on either.
Charger working? or not?
1 - 5 of 5 Posts
so I took it apart again and when the battery is not plugged to the motherboard, I get a reading from it off my multimeter. But when I plug it into the motherboard and test it nothing at all. So there has got to be a short somewhere that maybe I can't see. I have some pictures here never hurts to have a fresh pair of eyes look at it maybe see something I don't.http://s893.photobucket.com/albums/ac139/doc8927/?action=view¤t=IMAG0411.jpghttp://s893.photobucket.com/albums/ac139/doc8927/?action=view¤t=IMAG0411.jpghttp://s893.photobucket.com/albums/ac139/doc8927/?action=view¤t=IMAG0408.jpghttp://s893.photobucket.com/albums/ac139/doc8927/?action=view¤t=IMAG0409.jpg
Joined
·
314 Posts
Just got my Eken m001 today. I can't help you with the fix but I can tell you my charger light stays solid when charging and all three leds light up on Eken.My charger led also stays solid even if it's not plugged into the tablet. My charger model no. is K-Q6.
ok cool, thanks that I would guess means my charger is good something wrong with the board probably a short but either way i talked to the guy and he is sending me a replacement tablet so I should be good as new in a day of socarpenter940;49433 said:
1 - 5 of 5 Posts
Join the discussion
