[Roger Calver]

Excellent, I will check this out !

 

[Roger Calver]

Is there a special way of installing this or just 7zip the script folder to the SD card ?

 

[Roger Calver]

Answered my own question just copy the folder to the card.ive tryed once but the calibration didnt work so trying again.

 

[Roger Calver]

Yeah I didnt see you post.

 

[Roger Calver]

When you have calibrated it says press the enter key but how ?, or is it a long wait ?

 

[Roger Calver]

Nope just locks, trying again doesnt take long.

 

[Roger Calver]

I had this same problem at first. It's not like other devices where you quickly tap the screen at each calibration point; you have to tap and hold each point for a second before you release it.

No its the part after when it says press enter, I get nothing when touching the screen.

 

[Roger Calver]

where it says enter just try to reset by holding the power button to see if you get prompted again!! if not you can also run the calibration later on from the control panel....

When I do this on restart the touch screen is all out of sync.

 

[Roger Calver]

[quote name='TheMartian;19089]If I run this' date=' and end up with Windows CE on my EKEN,can I switch back to Android later, by simply running another firmware?[/QUOTE'] Yes you can, just install as normal.Im back on Slatedroid 1.3 now.

 

[Roger Calver]

Provoking Microsoft at the very least.