Android Tablets Forum banner
1 - 1 of 1 Posts

· Registered
18 Posts
Discussion Starter · #1 ·
I decided to take apart my APAD to see what was inside.I noticed a few things that were interesting.1) The builds were of higher quality than what I had seen posted on the web for the 7" version2)There is a unpopulated footprint for a second NAND flash chip3)The NAND flash chip that is populated is stamped with a 16GB Samsung chip but the software reads only 1GBAny way of getting the ROCKCHIP to see the entire 16GB?4)there are a few hand soldered wire connections where the board was probably incorrect.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.