[dsf767]

I thought id start a post about this. My boss wanted to check out my G tablet today and I was brought it to work. I used the box because I was afraid of damaging it. Would be nice to get a case for the tablet. Please post anything you come across.

[roebeet]

My netbook soft case works fine, but it doesn't really offer any protection. I'm thinking that any 10 inch netbook case should work, in theory. The sizes are very similar.

[klown07]

I agree with roebeet, I was looking at Target for the Ipad cases and screen protectors and such. Might be able to use ipads stuff

[dsf767]

I just ordered this one. It has good reviews and is a good brand (case logic) people say it works well for the ipad and its cheap.Amazon.com: Case Logic VLS-110 Sleeve for 7-Inch to 10-Inch Netbooks and iPad: BlueProton

[jtbnet]

I've actually got one of my GTabs that I'm using the most in the ZT-180 case w/keyboard that I've had for a while... Keyboard even works but one of the L-brackets for holding interferes with where the USB to full size connector is... of course that's not the ZT-180 cases's problem

[eski15]

Quote

Special designed!:cool:

Where did you get it??? and how much???

[twoworth]

dhgate.com has the specially made case. It's running around $40.

[MicroChip]

Not sure if selling is allowed here, but I originally bought what people were calling the P3 case, which is a nice case for the G Tab, and was one of the few available at the time. I had to trim it a bit to fully expose the soft keys and the power switch, but it's a good case. I then ordered the clip, which is also a good case.

I don't need both, if this lets me on my first post I'll UL a few pics of the P3 and if anybody wants to buy it, PM me. I paid like $28 including shipping, and I used it for about 2 months.

MC

Attached File(s)

•  1.jpg (4.65K)
  Number of downloads: 105
•  2.jpg (3.31K)
  Number of downloads: 101
•  3.jpg (3.95K)
  Number of downloads: 77

[CovKid66]

Here's a link to a HP NetBook case I bought:

http://www.tigerdire...u=H50-3015%20CA

Fits really well and is well padded for protection. Looks really nice too. The HP logo is kind of small and not really visible

This post has been edited by CovKid66: 14 April 2011 - 09:50 PM

[Dlewczyk]

I've got a Clip and an M1. I like the Clip a lot more. You can leave it on all the time even when putting the G-Tablet in the dock. It makes a great stand too. Kind of expensive though.

[Sm0k3d0uT]

MicroChip, on 14 April 2011 - 01:26 PM, said:

<br />Not sure if selling is allowed here, but I originally bought what people were calling the P3 case, which is a nice case for the G Tab, and was one of the few available at the time. I had to trim it a bit to fully expose the soft keys and the power switch, but it's a good case. I then ordered the clip, which is also a good case.<br />
<br />
I don't need both, if this lets me on my first post I'll UL a few pics of the P3 and if anybody wants to buy it, PM me. I paid like $28 including shipping, and I used it for about 2 months.<br />
<br />
MC<br />

<br /><br /><br />

We have a classified section here where you can post an ad to sell your case.
Swyped from my St0n3d VEGAn 1.0 Beta 5.1.1 G-Tab

[vectorman]

CovKid66, on 14 April 2011 - 09:44 PM, said:

Here's a link to a HP NetBook case I bought:

http://www.tigerdire...u=H50-3015%20CA

Fits really well and is well padded for protection. Looks really nice too. The HP logo is kind of small and not really visible

I picked up this exact sleeve at Walmart for $9. It's the same HP Mini Sleeve, part #NF869AA. It's a black, double-zippered neoprine sleeve with the HP swirl logo in white, and fits the G-Tab perfectly.

Here it is at Walmart
http://www.walmart.c....leeve/11018829

This post has been edited by vectorman: 15 April 2011 - 04:04 AM

[keepu]

I picked up a clip case from ITSteve at ElectronicCrap.com and I couldn't be happier with the case or the service.

[Albatross]

FYI before people go buying iPad accessories, the iPad is slightly shorter. If the case your looking at is supposed to be a snug fit it wont fit Your gtablet.

[karlkarloffs]

I bought a Solo E-Reader case from Staples for 20 bucks or so, its made as a fit all case to hold either an Ipad or a Kindle. It was a bit wide at the bottom for my Gtab, but I made a little foam thing to run along the bottom that offers a bit more protection and serves as a handy wrist rest when typing on the screen keyboard. Here is the link to the Staples website:

http://www.staples.c...6?cmArea=SEARCH

[Indylatenight]

keepu, on 15 April 2011 - 09:07 AM, said:

I picked up a clip case from ITSteve at ElectronicCrap.com and I couldn't be happier with the case or the service.

+1 on the clip case. I tried one of the ones with the built-in usb keyboard and it was a total pain to use. The clip adjusts in so many ways it's the perfect case for the G-tab in my opinion.

[mindwave]

i needed one that would dpuble as a wallet (old school franklin user)

so for me this one was PERFECT

http://www.amazon.co...duct/B004T6A484

[BUYaDROID]

You can get the OEM case.

Or any of the 10 inch generic cases. Even the generic 10 inch leather types work well, and as a added benefit, They do not slide out of the case.

[Curt W]

keepu, on 15 April 2011 - 09:07 AM, said:

I picked up a clip case from ITSteve at ElectronicCrap.com and I couldn't be happier with the case or the service.

I also bought a case from ITSteve and had the same experience. I have the P3 case and love it!

[dagwud]

I picked up a case for the Malata Zpad T2 from here: http://hotmid.com/le...ta-zpad-t2.html

Took 3 weeks to arrive from Asia. I was pleasantly surprised with the fit and quality. It's PU leather, so I expected nasty odors from the polyurethane coating. But it wasn't too bad at all.

It's not top-grain leather, but neither is my gTablet.

I believe it's the same model as the M1 from electroniccrap.com

This post has been edited by dagwud: 19 April 2011 - 06:49 PM